低压电器产品紧固螺钉的计算及设计

对低压电器螺钉连接的强度进行了理论分析和探讨。得出螺钉连接的可靠性设计数据，对金属薄板件小螺纹孔翻边成形的设计提出了设计依据和数值。     

Effect of prolonged water absorption on mechanical properties in cellulose fiber reinforced vinyl‐ester composites

With the increasing of worldwide societal awareness about environmental impact, sustainability, and renewable energy sources, the polymer natural fiber composites recently have attracted the attention of researchers due to the fact that they are recyclable and biodegradable. This study conducted a new infiltration method that involved very thin sheets of recycled cellulose fibers (RCF) being fully soaked in vinyl‐ester resin for the development of natural fiber reinforced polymer composites. The effect of prolonged water absorption on the mechanical behavior of cellulose fiber (0–50 wt%) reinforced vinyl‐ester composites was investigated. The elastic modulus of these composites was measured and the data were validated with various mathematical models. The modeling results revealed that the experimental data matched the prediction data obtained by the Cox–Krenchel model. Prolonged exposure of these composites to water absorption caused a reduction in elastic modulus, strength, and toughness. POLYM. ENG. SCI., 55:2685–2697, 2015. © 2015 Society of Plastics Engineers     

Synthesis of polyvinylidene fluoride (PVDF) membranes for protein binding: Effect of casting thickness

Microporous polyvinylidene fluoride (PVDF) membranes were synthesized from PVDF/N‐methyl‐2‐pyrrolidinone (NMP) solutions using an immersion–precipitation method with a 2‐propanol/water mixture as a soft coagulant. The effects of membrane thickness on pore size distribution and surface/cross‐section morphology were studied using capillary flow porometry and scanning electron microscopy (SEM), respectively. All the synthesized membranes had a small range of pore size distribution, with the pore size decreasing with increasing casting thickness. The semicrystalline PVDF membranes demonstrated significant variations in morphology under SEM observation, with the existence of polymer agglomeration at a casting thickness of 500 μm and above. The protein binding capacity was observed to be highest at a casting thickness of 400 μm, where optimum pore morphology provided a large surface area for protein binding. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and characterisation of chemical bath deposited TiO2 thin-films

A series of titania thin films was prepared by chemical bath deposition (CBD) of TiCl₃ on indium tin oxside (ITO) glass at room temperature, followed by calcinations at 500 °C for 4 h. The effect of cyclic deposition on phase composition, microstructure and electrical resistivity of TiO₂ thin films was characterised using X-ray diffraction, scanning electron microscopy and four-point probe respectively. Results showed that TiO₂ films produced by single deposition cycle were amorphous. In contrast, those produced by 5 and 6 deposition cycles were partly amorphous and partly crystalline with the formation of rutile. Both the film thickness and electrical resistivity increased with an increase in the number of deposition cycles.     

Preparation of porous Ti35Nb alloy and its mechanical properties under monotonic and cyclic loading

The Ti-35%Nb(mass fraction) foams were prepared by a powder metallurgy method,and the microstructure and the mechanical properties of the foams under monotonic and cyclic loading were investigated.The microstructure of the foams mainly consists of β phase,and the foams exhibit the homogenous pore distribution with the average pore size of 252 μm.The foams with 66% porosity show a typical stress-strain curve of the open-cell foams,and the plateau stress is about 56 MPa.The fatigue strength of the foam is 15.12 MPa at 107 cycles.The fractographic analysis of the foams reveals that the cracks nucleate within the struts and grow in a fatigue mechanism,resulting in the acceleration of the fatigue damage of the foams.     

The formation of nanostructured surfaces by electrochemical techniques: a range of emerging surface finishes. Part 2: examples of nanostructured surfaces by plating and anodising with their applications

In part 1 of this review, emerging practice to realise nanostructured metallic coatings by electrodeposition, anodising and electrophoresis has been considered. Conventional, aqueous electrolytes may be utilised in some cases if workpiece preparation and process conditions are well controlled. Such coatings can provide wear and corrosion resistance or a catalytic or high active area compared to more conventional coatings. An overview of the principles involved in deploying electrochemical techniques to produce nanostructured surfaces and factors influencing developments in this rapidly emerging field were considered. The strategies, which can be adopted to electrodeposit nanostructured metallic coatings, include grain refinement, application of a pulsed current, inclusion of nanoparticles into the coating and the use of nanoporous templates. In part 2, examples of nanostructured coatings and their properties are illustrated with research findings from the authors’ laboratory and the literature. Nanostructured metallic coatings include nanocrystalline, functionally graded, nanocomposite and recently introduced hierarchical structures. The potential uses for these coatings in engineering industries (including tribology and energy conversion) are summarised. Finally, future developments necessary to realise and deploy the coatings in increasingly demanding environments are considered.     

The Role of Autophagy in Chemical Proteasome Inhibition Model of Retinal Degeneration

We recently demonstrated that chemical proteasome inhibition induced inner retinal degeneration, supporting the pivotal roles of the ubiquitin–proteasome system in retinal structural integrity maintenance. In this study, using beclin1-heterozygous (Becn1-Het) mice with autophagic dysfunction, we tested our hypothesis that autophagy could be a compensatory retinal protective mechanism for proteasomal impairment. Despite the reduced number of autophagosome, the ocular tissue morphology and intraocular pressure were normal. Surprisingly, Becn1-Het mice experienced the same extent of retinal degeneration as was observed in wild-type mice, following an intravitreal injection of a chemical proteasome inhibitor. Similarly, these mice equally responded to other chemical insults, including endoplasmic reticulum stress inducer, N-methyl-D-aspartate, and lipopolysaccharide. Interestingly, in cultured neuroblastoma cells, we found that the mammalian target of rapamycin-independent autophagy activators, lithium chloride and rilmenidine, rescued these cells against proteasome inhibition-induced death. These results suggest that Becn1-mediated autophagy is not an effective intrinsic protective mechanism for retinal damage induced by insults, including impaired proteasomal activity; furthermore, autophagic activation beyond normal levels is required to alleviate the cytotoxic effect of proteasomal inhibition. Further studies are underway to delineate the precise roles of different forms of autophagy, and investigate the effects of their activation in rescuing retinal neurons under various pathological conditions.     

Facile Synthesis and Characterization of Palm CNF-ZnO Nanocomposites with Antibacterial and Reinforcing Properties

Cellulose nanofibers (CNF) isolated from plant biomass have attracted considerable interests in polymer engineering. The limitations associated with CNF-based nanocomposites are often linked to the time-consuming preparation methods and lack of desired surface functionalities. Herein, we demonstrate the feasibility of preparing a multifunctional CNF-zinc oxide (CNF-ZnO) nanocomposite with dual antibacterial and reinforcing properties via a facile and efficient ultrasound route. We characterized and examined the antibacterial and mechanical reinforcement performances of our ultrasonically induced nanocomposite. Based on our electron microscopy analyses, the ZnO deposited onto the nanofibrous network had a flake-like morphology with particle sizes ranging between 21 to 34 nm. pH levels between 8–10 led to the formation of ultrafine ZnO particles with a uniform size distribution. The resultant CNF-ZnO composite showed improved thermal stability compared to pure CNF. The composite showed potent inhibitory activities against Gram-positive (methicillin-resistant Staphylococcus aureus (MRSA)) and Gram-negative Salmonella typhi (S. typhi) bacteria. A CNF-ZnO-reinforced natural rubber (NR/CNF-ZnO) composite film, which was produced via latex mixing and casting methods, exhibited up to 42% improvement in tensile strength compared with the neat NR. The findings of this study suggest that ultrasonically-synthesized palm CNF-ZnO nanocomposites could find potential applications in the biomedical field and in the development of high strength rubber composites.