电子新品可靠性技术

文中分析了新研制电子产品的可靠性技术的有关问题，在明确这些问题实质的基础上提出了解决的措施和办法。     

大塑性变形制备超细晶生物医用钛合金的研究进展

生物医用钛合金具有高强度、良好的耐蚀性能、较低的弹性模量、优异的生物相容性,已成为具有广阔应用前景的医用金属材料之一.与传统医用钛合金相比,超细晶医用钛合金具有更高的强度与更好的疲劳性能以及耐腐蚀性能.此外,超细晶钛合金可诱导骨组织向内生长,增加界面结合强度,加快骨修复进程,在硬组织修复材料领域具有广阔的应用前景.阐述了各种大塑性变形（Severe Plastic Deformation）法制备超细晶生物医用钛合金的研究状况与最新进展,指出了SPD法制备医用钛合金中存在的技术问题和发展方向,并展望了利用SPD法对生物医用钛合金改性将成为生物医用材料的研究热点.     

p53 codon 72 polymorphism in Taiwanese lung cancer patients: association with lung cancer susceptibility and prognosis

Previous studies have indicated that milrinone, a specific type III phosphodiesterase inhibitor, may be able to induce chloride secretion in cystic fibrosis (CF) tissues. We have now assessed the effect of this agent in vivo on the nasal epithelium of CF mutant mice and also in the nose and lungs of human subjects with CF. Wild-type mice showed a small hyperpolarization of the nasal potential difference (PD) in response to milrinone (100 microM, 1.6 +/- 0.6 mV, n = 8, P < 0.05). In contrast, CF mice carrying either the most common human mutation of the gene for the CF transmembrane regulator (CFTR), DeltaF508 (protein mislocalized), or the G551D mutation (protein normally localized) failed to demonstrate this response. Milrinone perfused alone had no significant effect on the baseline nasal PD of human subjects without CF (14.7 +/- 4.0 mV preperfusion; 15.3 +/- 4.6 mV postperfusion), but significantly (P < 0.05) augmented the hyperpolarization induced by a subsequently perfused low-chloride solution (with milrinone, 36.8 +/- 3.0 mV, n = 6; without milrinone, 18.1 +/- 2.2 mV, n = 19). In contrast, in human subjects with CF (n = 6), milrinone alone significantly (P < 0. 05) altered the nasal baseline PD (52.2 +/- 3.3 mV preperfusion; 57. 4 +/- 4.2 mV, postperfusion) but not the subsequent responses to the low-chloride solution (with milrinone, 1.1 +/- 2.2 mV, n = 4; without milrinone, 0.6 +/- 0.5 mV, n = 28) or to isoproterenol (100 microM). In a separate study in subjects (n = 6) with the DeltaF508 mutation, nasal coadministration of milrinone with isoproterenol produced no effect in the presence of amiloride and a low-chloride solution (-0.8 +/- 0.5 mV). This was also the case in the nasal epithelium of CF subjects (n = 4) carrying at least one G551D allele (-0.3 +/- 0.8 mV). Similarly, milrinone did not hyperpolarize the PD of either the tracheal (n = 6) or segmental (n = 6) airways of CF subjects (DeltaF508) when applied topically in vivo in the presence of amiloride, isoproterenol, or adenosine triphosphate (all 100 microM) in a low-chloride solution. These data do not support the use of milrinone to induce chloride secretion in CF airways in vivo.     

Production of anti-erythrocyte antibodies by leukemic and nonleukemic B cells in chronic lymphocytic leukemia patients

We have assessed the specificity of antibodies from the leukemic B cells of five patients with both chronic lymphocytic leukemia and autoimmune hemolytic anemia (CLL-AHA). Leukemic cells from one patient displayed surface immunoglobulin with heavy and light chain isotypes identical to that of the patient's anti-red blood cell (RBC) antibodies, and the leukemic cells secreted antibodies in vitro with anti-RBC activity. However, in the remaining patients, the leukemic cells displayed surface immunoglobulin with light chain isotypes different from that of the patient's anti-RBC antibodies and secreted antibodies in vitro with no detectable anti-RBC activity. Thus, there are two distinct classes of CLL-AHA patients, differentiated by the presence or absence of an anti-RBC antibody-producing leukemic B cell clone. The apparent heterogeneity in the source of pathogenic anti-RBC antibodies may impact the treatment response of the two classes of CLL-AHA patients.     

Growth and characterization of Pb0.97La0.02(Zr0.66Sn0.27Ti0.07)O3 antiferroelectric single crystals

Single crystals of Pb_0.97La_0.02(Zr_0.66Sn_0.27Ti_0.07)O₃ (PLZST) with the composition near the morphotropic phase boundary were grown by the flux method. The PbO–PbF₂–B₂O₃ system was used as a solvent. PLZST single crystals with the size of 4–6 mm are obtained and these crystals are slightly translucent after polishing. The splitting of (200) reflection peak indicates that the obtained crystals are of a single phase with tetragonal perovskite structure. The element contents of the grown crystals were measured by inductively coupled plasma atomic emission spectrometry. The chemical composition of the crystals is Pb_0.979La_0.014(Zr_0.666Sn_0.285Ti_0.049)O₃. Thermal properties and dielectric properties of PLZST single crystals were studied. The results show that flux-grown PLZST single crystals exhibit obvious endothermic processes and relaxor behaviors near the phase transition temperatures.     

Correlation between structural and optical properties of 30 nm and 60 nm lead sulfide nanowires

PbS nanowires with 30 nm and 60 nm diameter fabricated under the same condition of electrochemical deposition with sulfuric and oxalic anodic alumina membranes (AAM), respectively, have been successfully prepared in order to study their optical properties in relation to their size. Scanning electron microscopy indicates that the 60 nm PbS nanowire arrays have the same shape with the 30 nm. X-ray diffraction result shows that 60 nm PbS nanowires are crystalline and have a highly (200) preferential orientation like 30 nm ones. UV spectrum considers the nanowire size decrease as the absorption peak shifts to the blue. The quantum confinement effects compared between 30 nm and 60 nm PbS nanowire arrays were observed by the measurements of ultraviolet-visible absorption spectroscopy (UV-vis).     

Sn及其氧化物超微粉的制备与测试

本文采用气体蒸发法制备出粒度不到５ｎｍ的Ｓｎ及其氧化物的超微粉。利用热重，差热分析和Ｘ射线衍射谱等测试方法研究了热处理制度对其粒度，成份和气敏特性的影响，发现了ＳｎＯ_２正交相的存在。     

He Ⅱ常流体粘度实验测量技术研究进展

目前还没有现成的理论可以对He Ⅱ粘度进行合理的说明和计算,在大多数情况下还只能依靠实验技术来满足其工程需要.本文对传统实验技术,目前出现的各种改进型实验技术进行了概述,事实表明不同的实验技术所得的结果之间偶有符合,但不能从根本上解决He Ⅱ粘度对实验技术的依赖性,目前的实验技术还无法提供He Ⅱ粘度数值的一致性结论.但是通过对He Ⅱ粘度与温度之间的变化趋势、数值的数量级等方面的分析,证明了He Ⅱ粘度在1.6 K～1.8 K之间形成了最小值区域.当温度继续低于1.6 K时,He Ⅱ粘度会迅速增加,同样在温度高于1.8 K时,随着温度的增加,He Ⅱ粘度也会迅速增加.     

Machine learning-based real-time visible fatigue crack growth detection

Many large-scale and complex structural components are applied in the aeronautics and automobile industries.However,the repeated alternating or cyclic loads in ...