Gait function in spastic hemiparetic patients walking barefoot, with firm shoes, and with ankle-foot orthosis

Cortical spreading depression is a wave of electrical and biochemical changes that spreads across the cerebral cortex. It has been hypothesized to be an important underlying cause of the visual disturbances occurring during the migraine aura, but this is difficult to test in animals or humans. We created a computational model of cortical spreading depression and found that during the wave of biochemical changes the spatial pattern of neural activity broke up into irregular patterns of lines and small patches of highly activated elements. The corresponding visual disturbances that would be produced by these patterns of neural activity resemble the hallucinations reported during the migraine aura, providing strong support for the cortical spreading depression hypothesis of migraine. The model also makes the testable prediction that these hallucinations move at an exponentially increasing speed across the visual field.     

Spinal amino acid release and precipitated withdrawal in rats chronically infused with spinal morphine

Glutamate receptors are implicated in the genesis of opioid tolerance and dependence. Factors governing release of amino acids in systems chronically exposed to opiates, however, remain undefined. Using rats, each prepared with a spinal loop dialysis catheter and with a chronic lumbar intrathecal infusion catheter connected to a subcutaneous minipump, the release of amino acids before and during antagonist-precipitated withdrawal in unanesthetized rats was examined. Spinal infusion of morphine (20 nmol/micro l/hr) for 4 d had little effect on resting release of amino acids. In morphine-infused, but not saline-infused, rats naloxone (2 mg/kg, i.p.) evoked an immediate increase in the release of L-glutamate (299 +/- 143%) and taurine (306 +/- 113%) but not other amino acids. The magnitude and time course of the release of these amino acids significantly correlated with behavioral indices of withdrawal intensity. Acute intrathecal pretreatment immediately before naloxone with clonidine (20 microg; alpha2 agonist), MK-801 (3 microg; noncompetitive NMDA antagonist), or aminophosphonopentanoic acid (AP-5; 3 microg; competitive NMDA antagonist) suppressed naloxone-induced increases in spinal L-glutamate and taurine release and behavioral signs of withdrawal in spinal morphine-infused rats. Results point to a correlated increase in spinal L-glutamate release, which contributes to genesis of the opioid withdrawal syndrome. Agents such as clonidine that suppress opioid withdrawal may owe their action to an inhibition of excitatory amino acid release. The effects of MK-801 and AP-5 suggest a glutamate-evoked glutamate release.     

Synthesis and antiplatelet, antiinflammatory, and antiallergic activities of substituted 3-chloro-5,8-dimethoxy-1,4-naphthoquinone and related compounds

2-Amino (6), 2-alkylamino (7-8), 2-methoxy (9), 2-acetamido (10), and 5,8-diacetoxy (11) derivatives of the lead compound 2,3-dichloro-5,8-dimethoxy-1,4-naphthoquinone (4) were synthesized, together with 6,7-dichloro-5,8dimethoxy-1,4-naphthoquinone (5), a positional isomer of 4. Antiplatelet, antiinflammatory, and antiallergic activities were evaluated, and most compounds were quite potent in all assays. Compounds 5 and 9-11 were especially active; however, 5 was ineffective against neutrophil superoxide formation, and 10 was ineffective against mast cell degranulation.     

Selective Oxidation of Methanol to Formaldehyde Using Modified Iron-Molybdate Catalysts

Methanol selective oxidation to formaldehyde over a modified Fe-Mo catalyst with two different stoichiometric (Mo/Fe atomic ratio = 1.5 and 3.0) was studied experimentally in a fixed bed reactor over a wide range of reaction conditions. The physicochemical characterization of the prepared catalysts provides evidence that Fe₂(MoO₄)₃ is in fact the active phase of the catalyst. The experimental results of conversion of methanol and selectivity towards formaldehyde for various residence times were studied. The results showed that as the residence time increases the yield of formaldehyde decreases. Selectivity of formaldehyde decreases with increase in residence time. This result is attributable to subsequent oxidation of formaldehyde to carbon monoxide due to longer residence time.     

Preparation of Titanium-Containing Carbon–Silica Composite Catalysts and Their Liquid-Phase Epoxidation Activity

Titanium-containing catalysts have been prepared by two different post-synthesis methods using activated carbon and carbon-silica composite as catalyst supports. They have been applied to the liquid-phase epoxidation of cyclohexene with tert-butyl hydroperoxide (TBHP) and H₂O₂. The carbon-silica composite catalyst showed a high conversion and selectivity to epoxide compared to the Ti-carbon catalyst and silica-based catalysts for the cyclohexene epoxidation with H₂O₂. The highest values of cyclohexene conversion and epoxide selectivity were obtained with the carbon-silica composite catalyst having a titanium content of 3 wt%.     

Integration Concepts for the Fabrication of LTCC Structures

At the Keck Smart Materials Integration Laboratory at Penn State University, low-temperature co-fired ceramic (LTCC) material systems have been used to fabricate a number of devices for a variety of applications. This article presents an overview of the integration of the concepts and materials that we have used to achieve miniaturization and unique device function. Examples of microwave filters, metamaterial antennas, and a dielectrophoretic cell sorter will be presented, with emphasis on device modeling and design, prototype construction methods, and test results.     

A study of desulfurization ability and activation energy for CuO-AgO sorbents

In this study, we investigated desulfurization abilities and activation energy using TGA for CuO-AgO sorbents calcined at 700 °C. CuO was used as a main active material and AgO was used as an additive material and 25 wt% SiO₂ was used as a support material. The desulfurization reaction temperatures were 450 °C, 500 °C, and 550 °C and the regeneration reaction temperature was 700 °C. From the TGA experiments, the best sulfur loading of CAS1 sorbent containing 1 wt% AgO was about 14.95 g sulfur/100 g sorbent at 550 °C. The activation energy was calculated by the Chatterjee-Conrad method based on the TGA experiment. Desulfurization ability and activation energy of sorbent were decreased as the content of AgO increased.     

Effect of temperature, oxidant and catalyst loading on the performance of direct formic acid fuel cell

We investigated the effect of temperature, oxidant and catalyst loading on the performance of direct formic acid fuel cell (DFAFC). When oxidant was changed from air to oxygen, the power density was increased to 17.3 mW/ cm² at 25 ‡C. The power density of DFAFC operated with oxygen showed a maximum value of 40.04 mW/cm² with the temperature rise from room temperature to 70 °C. The highest power density of DFAFC using air was observed for Pt-Ru black catalyst with loading of 8 mgPt/cm² at room temperature. At 70 ‡C; however, the performance of catalyst with the loading of 4 mgPt/cm² was higher than that of 8 mgPt/cm². The DFAFC, operated with oxygen and catalyst of 4 mgPt/cm² loading, showed the best performance at all temperature range. The enhancement of cell performance with an increase of catalyst loading is believed to come from an increase of catalyst active sites. However, operated at higher temperature or with oxygen, the cell with higher catalyst loading showed lower performance than expected. It is speculated that the thick catalyst layer inhibits the proton transport.     

Assembly of strands of multiwall carbon nanotubes and gold nanoparticles using alkanedithiols

Multiwall carbon nanotubes and gold nanoparticles (MWCNT–AuNP) were assembled into strands by cross-linking with alkanedithiols. Long MWCNT strands were first shortened to ∼0.25 μm by chemical oxidation followed by ball-milling, and then thiolated by reaction with cysteamine. The thiol groups on the surfaces of the MWCNT strands combined with Au nanoparticles to produce MWCNT–AuNP strands. A simple mixing of these strands with alkanedithiols resulted in an assembly of strands linked by the alkanedithiols which adsorbed onto the surfaces of the AuNPs attached to the MWCNT–AuNP strands. Short MWCNT–AuNP strands connected to one another in a parallel arrangement, whereas long strands assembled in a crossing arrangement. The possibility of using this method to chemically bond MWCNTs to lower the contact resistance of thin CNT films is discussed.     

Thermal properties and crystalline structure of liquid crystalline poly(ethylene terephthalate‐co‐2(3)‐chloro‐1,4‐phenylene terephthalate)

Thermal properties and crystalline structure of liquid crystalline (LC) poly(ethylene terephthalate‐co‐2(3)‐chloro‐1,4‐phenylene terephthalate) [copoly(ET/CPT)] were investigated using differential scanning calorimetry (DSC), thermogravimetry (TGA), limiting oxygen index (LOI) measurement, electron dispersive X‐ray analysis (EDX), X‐ray diffractometry, and infrared spectrometry (IR). The thermal transition temperatures of copoly(ET/CPT) were changed with the composition. Copoly(ET/CPT) showed two thermal decomposition steps and the residues at 700°C and LOI values of copoly(ET/CPT) were almost proportional to its chlorine content. The activation energy of thermal decomposition of LC units was very low compared to that of poly(ethylene terephthalate)(PET) units. Crystal structure of copoly(ET/CPT) (20/80) was of triclinic system with the lattice constants of a = 9.98 A?, b = 8.78 A?, c = 12.93 A?, α = 97.4°, β = 96.1°, and γ = 90.8°, which is very close to that of poly(chloro‐p‐phenylene terephthlate) (PCPT) with the lattice constants of a = 9.51 A?, b = 8.61 A?, c = 12.73 A?, α = 96.8°, β = 95.4°, and γ = 90.8°. When copoly(ET/CPT)(50/50) was annealed at 220°C in vacuum, crystallization induced sequential reordering (CISR) was not observed but the heat of fusion was slightly increased due to the increase of the trans isomer content in PET units. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1286–1294, 2002; DOI 10.1002/app.10451