Dissolution of Ti wires in sulphuric acid and hydrochloric acid solutions

Ti wire electrodes were immersed in acidic solutions containing H₂SO₄ and HCl of various concentrations at 353 K to evaluate corrosion rate by measurement of electric resistance change (resistometry). Addition of hydrochloric acid to sulphuric acid solution promoted depassivation of Ti. After depassivation, the immersion potential dropped to the hydrogen evolution potential and a hydride layer was formed on the surface. The hydride layer dissolved continuously in the acidic solution. SEM observation showed that Ti wires dissolved almost uniformly in the early stage and that the dissolution then trace became irregular due to nonuniform growth of the hydride layer. Dissolution rate of a Ti wire was estimated almost accurately by resistometry.     

Surface characteristics of fluorine-modified PAN-based carbon fibers

Different fluorination methods were applied to modify the surface properties of carbon fibers. The relationship between the degree of fluorination and the physicochemical properties of carbon fibers was studied using a combination of mechanical tests, elemental analysis (EA), X-ray photoelectron spectrometry (XPS), and X-ray diffraction (XRD). EA and XPS analyses of fluorinated carbon fibers showed that treatment with mixtures of F₂/O₂ introduced a much higher fluorine concentration than that with F₂ only. However, XRD analysis showed that there was no increase in the interlayer distance, due to the mild fluorination condition applied. Consequently, the oxyfluorination was one of the more effective methods to increase surface polarity of carbon fibers, which probably played an important role in improving the tensile properties of the fibers in the epoxy resin system.     

Influence of the silicon surface treatment by plasma etching and scratching on the nucleation of diamond grown in HFCVD - a comparative study

A comparative study for the nucleation of diamond was carried out using surface treatment like (i) surface scratching with 1 μm diamond paste and (ii) surface etching using chlorine plasma at different RF powers (50, 100 and 150 W). Atomic force microscopic study shows variation in roughness from 31 nm to 110 nm. Scratching results in random scratches, whereas plasma etches a surface uniformly. Scanning electron microscopic observations show well faceted crystallites with a predominance of angular shaped grains corresponding to 〈100〉 and 〈110〉 crystallite surfaces for the scratched as well as plasma etched substrate. Surface etching at 150 W plasma power results in a better growth in comparison with 50 and 100 W plasma powers. Chlorine-radical is found responsible for the changes in the growth morphology. Raman spectroscopy shows a sharp peak at 1,332 cm⁻¹ and a peak at ∼1,580 cm⁻¹ for both samples.     

Gait function in spastic hemiparetic patients walking barefoot, with firm shoes, and with ankle-foot orthosis

Cortical spreading depression is a wave of electrical and biochemical changes that spreads across the cerebral cortex. It has been hypothesized to be an important underlying cause of the visual disturbances occurring during the migraine aura, but this is difficult to test in animals or humans. We created a computational model of cortical spreading depression and found that during the wave of biochemical changes the spatial pattern of neural activity broke up into irregular patterns of lines and small patches of highly activated elements. The corresponding visual disturbances that would be produced by these patterns of neural activity resemble the hallucinations reported during the migraine aura, providing strong support for the cortical spreading depression hypothesis of migraine. The model also makes the testable prediction that these hallucinations move at an exponentially increasing speed across the visual field.     

Disturbance of continuous, pump administration of cardiovascular drugs by hydrostatic pressure

Administration of highly concentrated, highly potent, and therefore highly dangerous drugs with syringe pumps is common in modern anaesthesia as well as in intensive care and emergency medicine. Because of their exact flow rates down to < 1 ml/h, these pumps are predestined for delivery of drugs with short half-lives, such as catecholamines and vasodilators. But intravenous application of drugs with syringe pumps is not without problems. While it is well known that syringes not fixed correctly into the pump can empty themselves by the influence of gravity, it seems not to be known that hydrostatic pressure can influence the flow rate of a correctly connected system even during continuous infusion. In this situation a change of height of the syringe pump in relation to the patient's position can have tremendous effects on hemodynamics due to unintended acceleration or deceleration of the flow rate. This case report demonstrates that the elevation of a connected epinephrine pump while moving a cardiac surgery patient after ACB operation from the operation table into his bed led to critical increases of heart rate, blood pressure and left atrial pressure. In order to quantify the problem we repeated the situation experimentally. It could be demonstrated that the elevation of the syringe pump by 80-100 cm delivers an additional bolus of 4-5 drops as the central venous catheter outlet. Lowering the pump consecutively leads to the opposite effect. In the case reported, the accidentally administered bolus of epinephrine was 12-15 micrograms (we use a concentration of 60 micrograms/ml epinephrine for continuous infusion with syringe pumps). From this accidental observation the following conclusion can be drawn: The change of height, in relation to the patient's position, of a running syringe pump during continuous infusion of highly concentrated cardiovascular drugs may cause considerable, even life-threatening hemodynamic disorders. Even in a closed infusion system (syringe-extension-central venous catheter), hydrostatic pressure influences infusion rate. Elevation of the pump leads to unintended bolus administration, and lowering of the pump is followed by an interruption of the infusion. In the knowledge of this phenomenon, unexpected hemodynamic reactions during transport of critically ill patients cannot always be interpreted as a result of inadequate anesthesia or volume load, but may be a consequence of incorrect handling of the syringe pumps as described in this report.     

Global folds of highly deuterated, methyl-protonated proteins by multidimensional NMR

The development of 15N, 13C, 2H multidimensional NMR spectroscopy has facilitated the assignment of backbone and side chain resonances of proteins and protein complexes with molecular masses of over 30 kDa. The success of these methods has been achieved through the production of highly deuterated proteins; replacing carbon-bound protons with deuterons significantly improves the sensitivity of many of the experiments used in chemical shift assignment. Unfortunately, uniform deuteration also radically depletes the number of interproton distance restraints available for structure determination, degrading the quality of the resulting structures. Here we describe an approach for improving the precision and accuracy of global folds determined from highly deuterated proteins through the use of deuterated, selectively methyl-protonated samples. This labeling profile maintains the efficiency of triple-resonance NMR experiments while retaining a sufficient number of protons at locations where they can be used to establish NOE-based contacts between different elements of secondary structure. We evaluate how this deuteration scheme affects the sensitivity and resolution of experiments used to assign 15N, 13C, and 1H chemical shifts and interproton NOEs. This approach is tested experimentally on a 14 kDa SH2/phosphopeptide complex, and a global protein fold is obtained from a set of methyl-methyl, methyl-NH, and NH-NH distance restraints. We demonstrate that the inclusion of methyl-NH and methyl-methyl distance restraints greatly improves the precision and accuracy of structures relative to those generated with only NH-NH distance restraints. Finally, we examine the general applicability of this approach by determining the structures of several proteins with molecular masses of up to 40 kDa from simulated distance and dihedral angle restraint tables.     

Dyspnea resulting from phrenic nerve paralysis after interscalene brachial plexus block in an obese male--a case report

While current psychiatric taxonomies recognise a classification of amphetamine dependence, derived from the notion of an alcohol dependence syndrome, little research has validated that such a condition exists for this drug. Current amphetamine users (N = 331), were interviewed using the World Health Organization operationalisation of DSM-III-R substance dependence criteria, and a measure of the psychological components of dependence. Structural analyses indicated that a unidimensional dependence syndrome as assessed by DSM-III-R and DSM-IV criteria exists for amphetamine, and that physiological, psychological and behavioural indicators were all important in accounting for the variance in responses. It was demonstrated that the concept of a dependence syndrome is applicable to amphetamine, and that the inclusion of the amphetamine dependence syndrome in DSM-III-R and DSM-IV is valid.