From the history of surgical instruments: 6. Sauerbruch's instruments for thoracic surgery

The historical development of thoracic surgery, which was established in Germany in the years 1904/1905 and the armamentarium of the chest designed by Ferdinand Sauerbruch (1875-1951) are described. Sauerbruch designed between 1904 and 1920 many instruments to facilitate thoracic surgery, e.g. several rib retractors, a special rib shear for the first rib, a rib shear for all ribs other than the first. Furthermore he designed a special lung grasping forceps with rubber covered jaws, a lung compression forceps and a fenestrated lung retractor to facilitate lung resections.     

Liquid-liquid extraction and separation of total rare earth (RE) metals from polymetallic manganese nodule leaching solution

The study on the solvent extraction for quantitative and selective separation of total rare earth metals from the polymetallic nodule leach liquor was investigated. The typical leach liquor bearing 0. 094 g/L total rare earth, 0. 23 g/L Mn, 0.697 g/L Cu, 0.2 g/L Fe, 0.01 g/L Co and 0.735 g/L Ni was subjected to the removal iron content by precipitation method using Ca(OH)2 at pH 3.95, prior to solvent extraction of rare earth metals. Three different organo-phosphoric acid reagents(D2EHPA, PC88 A, Cyanex 272) were used to ascertain their performances and selectivity towards the loading of rare earth metals in presence of other base metals. Based on the results of eq. pH effect, the performances of above three extractants followed the order as: D2EHPA>PC88A>Cyanex 272. To ensure the absence of extraction of base metals(Cu, Co, Ni), the eq. pH of the solution was optimized at the level of 2.21, though higher rare earth metal extraction efficiency was observed at higher eq. pH with either of the extractants. The complete process flow diagram for substantial recovery of total rare earth was developed using D2 EHPA. Extraction isotherm plot was constructed at A:O=12:1, 3-stages and pHe=2.21, using 0.8 mol/L D2 EHPA and the predicted condition of this study was further confirmed by 6-Cycles Counter Current Simulation(CCS) study. The stripping of total rare earth from loaded organic phase(LO) was conducted using HCl solution. Mc-Cabe Thiele diagram study carried out at A:O=1:5 using 4 mol/L HCl showed that three theoretical stages were needed for quantitative stripping of total rare earth. The subsequent stripped solution resulted thus led to contain total rare earth of 5.6 g/L indicating a very high enrichment of total metals by solvent extraction(SX) process.     

Numerical simulations for silicon crystallization processes—examples from ingot and ribbon casting

At ACCESS e.V. numerical simulations of casting and heat treatment processes are performed and are in use for process optimization since more than 10 years. During the last few years, a simulation technique, for the prediction of microscale texture characteristics dependent on the solidification conditions, has been additionally developed. Both simulation methods are applied to silicon crystallization processes in close collaboration with partners from the industry, namely the Deutsche Solar GmbH.In this paper, general features of numerical simulation for silicon crystallization techniques will be presented. The prospectives and limitations of these simulation methods will be discussed. Finally, examples of numerical simulation results on different length scales for two silicon-casting processes are given.     

Microstructure of thin film platinum electrodes on yttrium stabilized zirconia prepared by sputter deposition

(111) oriented thin film Pt electrodes were prepared on single crystals of yttrium-stabilized zirconia (YSZ) by sputter deposition of platinum. The electrodes were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), X-ray diffraction (XRD), energy-dispersive X-ray analysis (EDX), atomic force microscopy (AFM) and by profilometry. SEM images of the as-sputtered platinum film show a compact amorphous Pt film covering uniformly the substrate. Upon annealing at 1123 K, gaps and pores at the interface develop leading to a partial dewetting of the Pt film. Increasing the annealing temperature to 1373 K transforms the polycrystalline Pt film into single crystalline grains exhibiting a (111) orientation towards the substrate.     

Three-dimensional structure of the plant photosystem II reaction centre at 8 A resolution

Photosystem II is a multisubunit enzyme complex involved in plant photosynthesis. It uses solar energy to catalyse the breakdown of water to reducing equivalents and molecular oxygen. Native photosystem II comprises more than 25 different subunits, and has a relative molecular mass of more than 600K. Here we report the three-dimensional structure of a photosystem II subcomplex, containing the proteins D1, D2, CP47 and cytochrome b-559, determined by electron crystallography. This CP47 reaction centre, which has a relative molecular mass of 160K, can perform light-mediated energy and electron-transfer reactions but is unable to oxidize water. The complex contains 23 transmembrane alpha-helices, of which 16 have been assigned to the D1, D2 and CP47 proteins. The arrangement of these helices is remarkably similar to that of the helices in the reaction centres of purple bacteria and of plant photosystem I, indicating a common evolutionary origin for these assemblies. The map suggests that redox cofactors in the D1-D2 complex are located in positions analogous to those in the bacterial reaction centre, but the distance between the chlorophylls corresponding to the bacterial 'special pair' is significantly larger.