Effects of Ir Substitution and Processing Conditions on Thermoelectric Performance of p-Type Zr0.5Hf0.5Co1?xIrxSb0.99Sn0.01 Half-Heusler Alloys

A series of samples with the composition Zr_0.5Hf_0.5Co_1−x Ir _x Sb_0.99Sn_0.01 (x = 0.0 to 0.7) were synthesized by high-temperature solid-state reaction at 1173 K. High-density pellets of the powders were obtained using hot press (HP) and spark plasma sintering (SPS) techniques. The thermoelectric properties of the pellets were measured from 300 K to 750 K. Independently of the pressing conditions, all Ir-containing samples (x > 0) showed p-type semiconducting behavior. At 300 K, the electrical conductivity and thermopower of Zr_0.5Hf_0.5Co_1−x Ir _x Sb_0.99Sn_0.01 materials surprisingly increased with increasing Ir concentration. The largest electrical conductivity and thermopower values of 150 S/cm and 140 μV/K, respectively, were observed at 300 K for x = 0.7. The thermal conductivity of the synthesized materials decreased with increasing Ir content, went through a minimum value (x = 0.3), and increased thereafter with further addition of Ir. Pellets fabricated by SPS showed smaller thermal conductivity than pellets of the same composition obtained from uniaxial hot pressing. A thermal conductivity value of ∼2.0 W/m K was observed at 300 K for an SPS pellet with the com- position Zr_0.5Hf_0.5Co_0.5Ir_0.5Sb_0.99Sn_0.01. The thermal conductivity of Zr_0.5Hf_0.5- Co_1−x Ir _x Sb_0.99Sn_0.01 decreased with rising temperature, and the smallest value of ∼1.5 W/m K was observed at 750 K for the SPS specimen with x = 0.5.     

Fault Management in Distributed Systems: A Policy-Driven Approach

Managing the availability and performance of a distributed system involves monitoring the behavior of the system, identifying system problems, and correcting those problems. Each of these tasks requires some expertise, such as an understanding of the mechanics of the underlying system components. As the size and complexity of these systems increases, and the number of distributed applications executing on these systems increases, managing the availability and performance of distributed systems becomes more difficult. Little research has focused on embedding systems management expertise into a management application for a distributed system. In this paper we describe a rule-based management application for a commercially available distributed computing environment that is capable of monitoring the distributed system, detecting system service-related performance and availability problems, and generating corrective actions to correct the problems.     

The Frictional Properties of Newtonian Fluids in Rolling–Sliding soft-EHL Contact

A combined experimental and numerical study has been carried out to explore friction in rolling–sliding, soft-EHL contact. Experimental work has employed corn syrup solutions of different concentrations in water to provide a range of lubricant viscosities and has measured Couette friction in mixed rolling–sliding conditions over a wide range of entrainment speeds. A Stribeck curve has been generated, ranging from the boundary to full film, isoviscous-elastic lubrication regime. In the latter regime, friction coefficient is approximately proportional to the product of (entrainment speed × viscosity) raised to the power 0.55. Numerical solution of the isoviscous-elastic lubrication regime has been used to derive predictive equations for both Couette and Poiseuille friction in circular, soft-EHL contacts. This shows that in soft-EHL the Poiseuille or “rolling” friction can have magnitude comparable to the Couette friction. The calculated Poiseuille friction coefficient can be predicted from non-dimensional load and speed using a simple power law expression similar to that used for film thickness. However accurate prediction of calculated Couette friction coefficient requires a two-term power law expression. Comparison of experimental and numerical Couette friction coefficients shows quite good agreement between the two, with a similar non-dimensional speed dependence, but slightly lower predicted than measured values.     

Application of metal oxides-based nanofluids in PV/T systems: a review

Having the wide application of metal oxides in energy technologies, in recent years, many researchers tried to increase the performance of the PV/T system by using metal oxide-based nanofluids (NFs) as coolants or optical filters or both at the same time. This paper summarizes recent research activities on various metal oxides (Al₂O₃, TiO₂, SiO₂, Fe₃O₄, CuO, ZnO, MgO)-based NFs performance in the PV/T system regarding different significant parameters, e.g., thermal conductivity, volume fraction, mass flowrate, electrical, thermal and overall efficiency, etc. By conducting a comparative study among the metal oxide-based NFs, Al₂O₃/SiO₂-water NFs are mostly used to achieve maximum performance. The Al₂O₃-water NF has a prominent heat transfer feature with a maximum electrical efficiency of 17%, and a maximum temperature reduction of PV module of up to 36.9°C can be achieved by using the Al₂O₃-water NF as a coolant. Additionally, studies suggest that the PV cell’s efficiency of up to 30% can be enhanced by using a solar tracking system. Besides, TiO₂-water NFs have been proved to have the highest thermal efficiency of 86% in the PV/T system, but TiO₂ nanoparticles could be hazardous for human health. As a spectral filter, SiO₂-water NF at a size of 5 nm and a volume fraction of 2% seems to be very favorable for PV/T systems. Studies show that the combined use of NFs as coolants and spectral filters in the PV/T system could provide a higher overall efficiency at a cheaper rate. Finally, the opportunities and challenges of using NFs in PV/T systems are also discussed.     

Predatory Caddisfly Larvae Sequester Tetrodotoxin from Their Prey, Eggs of the Rough-Skinned Newt (Taricha granulosa)

Caddisfly larvae (Limnophilus spp.) are important predators of eggs of the rough-skinned newt (Taricha granulosa). Newts may possess extremely large quantities of the neurotoxin tetrodotoxin (TTX) in their skin, and females may provision this toxin in their eggs. Using a competitive inhibition enzymatic immunoassay, we examined TTX-resistant caddisflies, sympatric with the known most toxic population of newts, for the presence of TTX. We found that caddisflies sequester TTX after consuming eggs in the laboratory. Caddisfly larvae that were frozen immediately after collecting in the wild possessed TTX. Finally, wild-caught larvae reared on a TTX-free diet in the laboratory retained TTX for up to 134?days, through metamorphosis and into the adult stage.     

Non-solvolytic synthesis of aqueous soluble TiO2 nanoparticles and real-time dynamic measurements of the nanoparticle formation

Highly aqueously dispersible (soluble) TiO₂ nanoparticles are usually synthesized by a solution-based sol–gel (solvolysis/condensation) process, and no direct precipitation of titania has been reported. This paper proposes a new approach to synthesize stable TiO₂ nanoparticles by a non-solvolytic method - direct liquid phase precipitation at room temperature. Ligand-capped TiO₂ nanoparticles are more readily solubilized compared to uncapped TiO₂ nanoparticles, and these capped materials show distinct optical absorbance/emission behaviors. The influence of ligands, way of reactant feeding, and post-treatment on the shape, size, crystalline structure, and surface chemistry of the TiO₂ nanoparticles has been thoroughly investigated by the combined use of X-ray diffraction, transmission electron microscopy, UV-visible (UV–vis) spectroscopy, and photoluminescence (PL). It is found that all above variables have significant effects on the size, shape, and dispersivity of the final TiO₂ nanoparticles. For the first time, real-time UV–vis spectroscopy and PL are used to dynamically detect the formation and growth of TiO₂ nanoparticles in solution. These real-time measurements show that the precipitation process begins to nucleate after an initial inhibition period of about 1 h, thereafter a particle growth occurs and reaches the maximum point after 2 h. The synthesis reaction is essentially completed after 4 h.     

Curvature induced by amyloplast magnetophoresis in protonemata of the moss Ceratodon purpureus

After gravistimulation of Ceratodon purpureus (Hedw.) Brid. protonemata in the dark, amyloplast sedimentation was followed by upward curvature in the wild-type (WT) and downward curvature in the wwr mutant (wrong way response). We used ponderomotive forces induced by high-gradient magnetic fields (HGMF) to simulate the effect of gravity and displace the presumptive statoliths. The field was applied by placing protonemata either between two permanent magnets at the edge of the gap, close to the edge of a magnetized ferromagnetic wedge, or close to a small (<1 mm) permanent magnet. Continuous application of an HGMF in all three configurations resulted in plastid displacement and induced curvature in tip cells of WT and wwr protonemata. WT cells curved toward the HGMF, and wwr cells curved away from the HGMF, comparable to gravitropism. Plastids isolated from protonemal cultures had densities ranging from 1.24 to 1.38 g cm-3. Plastid density was similar for both genotypes, but the mutant contained larger plastids than the WT. The size difference might explain the stronger response of the wwr protonemata to the HGMF. Our data support the plastid-based theory of gravitropic sensing and suggest that HGMF-induced ponderomotive forces can substitute for gravity.     

Why do implicit and explicit attitude tests diverge? The role of structural fit.

Implicit and explicit attitude tests are often weakly correlated, leading some theorists to conclude that implicit and explicit cognition are independent. Popular implicit and explicit tests, however, differ in many ways beyond implicit and explicit cognition. The authors examined in 4 studies whether correlations between implicit and explicit tests were influenced by the similarity in task demands (i.e., structural fit) and, hence, the processes engaged by each test. Using an affect misattribution procedure, they systematically varied the structural fit of implicit and explicit tests of racial attitudes. As test formats became more similar, the implicit-explicit correlation increased until it became higher than in most previous research. When tests differ in structure, they may underestimate the relationship between implicit and explicit cognition. The authors propose a solution that uses procedures to maximize structural fit. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Localization of human BRCA1 and its loss in high-grade, non-inherited breast carcinomas

Although the link between the BRCA1 tumour-suppressor gene and hereditary breast and ovarian cancer is established, the role, if any, of BRCA1 in non-familial cancers is unclear. BRCA1 mutations are rare in sporadic cancers, but loss of BRCA1 resulting from reduced expression or incorrect subcellular localization is postulated to be important in non-familial breast and ovarian cancers. Epigenetic loss, however, has not received general acceptance due to controversy regarding the subcellular localization of BRCA1 proteins, reports of which have ranged from exclusively nuclear, to conditionally nuclear, to the ER/golgi, to cytoplasmic invaginations into the nucleus. In an attempt to resolve this issue, we have comprehensively characterized 19 anti-BRCA1 antibodies. These reagents detect a 220-kD protein localized in discrete nuclear foci in all epithelial cell lines, including those derived from breast malignancies. Immunohistochemical staining of human breast specimens also revealed BRCA1 nuclear foci in benign breast, invasive lobular cancers and low-grade ductal carcinomas. Conversely, BRCA1 expression was reduced or undetectable in the majority of high-grade, ductal carcinomas, suggesting that absence of BRCA1 may contribute to the pathogenesis of a significant percentage of sporadic breast cancers.