Thermal wave oscillations and thermal relaxation time determination in a hyperbolic heat transport model

One of the major challenges in the study of thermal transport and its analysis, based on the hyperbolic model associated with Cattaneo equation, is the fact that it is necessary to determine the thermal relaxation time for the analyzed materials. This parameter has been an elusive physical quantity to be determined experimentally even though it is of crucial importance in heat transport. In this paper a system formed by a semi-infinite layer in contact with a finite one, that is excited by a modulated heat source is studied. It is shown that a frequency range can be found in which the amplitude and phase of the spatial component of the oscillatory surface temperature show strong oscillations when the thermal relaxation time of the finite layer is close to its thermalization time. When the thermal effusivities of the layers are quite different or their thermal relaxation times are similar, it is shown that simple analytical expressions for the values of the maxima and minima of the oscillations as well as for the frequencies, at which they occur, are obtained. These results were used to establish a methodology to determine the thermal relaxation time as well as additional thermal properties of the finite layer.     

Asymmetric bihomologous crosslinkers for bicomponent gels—The way to strongly increased elastic moduli

2‐Hydroxyethylmethacrylate (HEMA) and acrylamide (AA) have been copolymerized via free radical mechanism, in the presence of 5 mol % of four different crosslinker systems, the symmetric ethylenglycoldimethacrylate (EGDMA), bisacrylamide (BIS), a mixture of EGDMA and BIS, and the asymmetric acrylamideethylenmethacrylate (METAA). The polymerizations have been monitored with a rheometer, exhibiting the gel obtained with the asymmetric METAA, an elastic modulus that is dramatically increased compared with those of the gels prepared with the other three crosslinker systems. A kinetic analysis using the terminal model has been used to build probabilistic surfaces that give information about how the crosslinker is incorporated into the network. This analysis shows a high dissimilarity between the reactions using the asymmetric and the mixture of symmetric crosslinkers, what has been correlated to the difference in modulus. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

A new contribution to the study of the electrosynthesis of magnetic nanoparticles: the influence of the supporting electrolyte

This paper shows how magnetic nanoparticles are produced by electrochemical synthesis using a low carbon steel bar as an anode and 100 mA cm^?2 electric perturbations at room temperature. Two different kinds of salts, (CH₃)₄NCl and NaCl, were used to prepare the supporting electrolyte solutions. This allowed a comparison to be made between a surfactant and common salt, and allowed their influence on particle size to be analyzed. Additionally, mixtures of water and ethanol were added to the electrolyte solution in order to improve particle size distribution. The nanoparticle samples were characterized by X-ray diffraction, TEM, magnetization measurements, and Raman and Mössbauer spectroscopy. The results showed that after an optimized time of 10 min, the nanoparticles obtained in all the evaluated electrolytes were mainly magnetite (Fe₃O₄). The particles were between 8 and 10 nm in size. Depending on the nature of the electrolyte, the magnetite nanoparticles exhibited high purity and stoichiometry. The presence of ethanol in the electrolyte avoided particle agglomeration during the formation of magnetite. When the magnetic nanoparticles were exposed to an external magnetic field they showed superparamagnetic behavior and negligible coercivity. Such qualities are extremely useful for applications like ferrofluid precursors.     

On the evaluation of Six Sigma projects

Most of the research on the success in implementing Six Sigma agrees upon the fact that one of the key success factors is the selection of profitable projects. This seems to be especially important for high‐risk, large‐scope and long‐term projects, as is mostly the case in the design for Six Sigma projects. The purpose of this paper is to outline Six Sigma project characteristics and to present a new model for evaluating Six Sigma projects. To design a Six Sigma project evaluation model, we utilized mathematical optimization modeling techniques and real options theory. The model allows for the quantification of not only the project's value prior to its start but also its progress and the consideration of possible decisions based on this progress. Copyright © 2009 John Wiley & Sons, Ltd.     

Effect of glucose oxidase and mixing time on soluble and insoluble wheat flour protein fractions: Changes on SH groups and H2O2 consumption

Glucose oxidase (GOX) has been recognized as an alternative to substitute chemical oxidants in bread making, however the action exerted on wheat flour proteins by the H₂O₂ produced is still unclear. Looking for a better understanding of the role of GOX and H₂O₂ in the bread making process, the effect of varying GOX levels and mixing time on soluble and insoluble wheat flour protein fractions was studied. Results showed that GOX promoted a decrement in free SH groups in both proteins, being the most evident effect on the soluble fraction at the beginning of the mixing process, remaining almost constant afterwards. H₂O₂ was continuously produced during mixing, showing its largest consumption during the first 6 min without significant SH changes afterwards. Results suggest that H₂O₂ must be involved in other reactions as it remains in the sample; this also suggests that oxygen is not a limiting factor in this reaction.     

Mesophase features in isotactic poly(propylene‐co‐1‐heptene) copolymers

The influence of crystallization rate on the interesting polymorphism of random isotactic poly(propylene‐co‐1‐heptene) copolymers was studied, with particular attention to the conditions for obtaining the mesomorphic phase. Owing to the important decrease of cooling rate involved as the 1‐heptene content increases, the mesophase can be clearly observed by DSC for co‐unit contents above about 5 mol%. Furthermore, only the mesophase (or the amorphous phase) was found for the copolymer with 13.9 mol% 1‐heptene at common cooling rates of the calorimeter. Additionally, the copolymer with 21.4 mol% co‐units was found to be completely amorphous under any thermal treatment analyzed. Variable‐temperature diffraction experiments were carried out to ascertain unambiguously the nature of the phases involved. Finally, a remarkable transparency was attained (above 80% transmittance in the visible light region) at intermediate and high 1‐heptene contents, using easily accessible cooling rates. © 2016 Society of Chemical Industry     

Enhancing saccharification of Agave tequilana bagasse by oxidative delignification and enzymatic synergism for the production of hydrogen and methane

Agave tequilana bagasse is a suitable lignocellulosic residue for energy production. However, the presence of lignin and the heterogeneous structure of hemicellulose may hinder the availability of polysaccharides. In this work, the pretreatment of A. tequilana bagasse with alkaline hydrogen peroxide (AHP) followed by enzymatic saccharification with hemicellulases and cellulases was assessed for the removal of lignin and extraction of fermentable sugars, respectively. Results of the AHP pretreatment indicated that it is possible to attain up to 97% delignification and recover 88% of cellulose and hemicellulose after only 1.5 h of treatment. Regarding the saccharification process, the total sugar yield and productivity were both increased by 2-fold using an enzymatic mixture (cellulases + hemicellulases) compared to single enzyme hydrolysis (cellulases), evidencing synergism. Further evaluation of the hydrolyzates as substrate for hydrogen and methane production, resulted in yields 1.5 and 3.6-times (215.14 ± 13 L H₂ and 393.4 ± 13 L CH₄ per kg bagasse, respectively) superior to those obtained with hydrolyzates of non-pretreated bagasse processed with a single enzyme. Overall, using AHP pretreatment and subsequent hydrolysis with enzymatic mixtures improves the saccharification of A. tequilana bagasse enhancing the production of hydrogen and methane.     

Study on the new bone cement based on calcium sulfate and Mg,CO3 doped hydroxyapatite

In order to improve some features of bone substitutes the new self-setting composite-type implant material based on Mg²⁺/CO₃^2? co-substituted hydroxyapatite (Mg-CHA) and calcium sulfate hemihydrate (CSH) was developed. Synthetic hydroxyapatites doped with small amounts of additives found in natural bone (e.g. Mg²⁺ and CO₃^2?) are regarded as promising components of calcium phosphate bone cements (CPCs). The CPCs, now available on the market, due to low resorption rate are too stable to permit material degradation and are slowly replaced by the newly formed bone. To improve cement resorption we used calcium sulfate which is a well-known biodegradable and biocompatible bone defect filler. Combining properties of Mg-CHA and CSH allowed developing a new, promising, easy shapeable implant material with high potential for bone regeneration.