On the Certification of Bonded Repairs to Primary Composite Aircraft Components

Airworthiness certification is required when bonded repairs are made to primary composite structure in situations where damage has reduced or has the potential to reduce residual strength to below the design ultimate strength. Generally, certification of bonded primary structure poses many difficulties. As most repairs are one-off events meeting these certification requirements is especially challenging since demonstration by testing will generally not be possible or cost-effective. This paper discusses options for addressing the two key issues relating to certification: (a) how to validate initial and enduring bond strength of adhesive bonds, mainly given the inability of conventional non-destructive inspection to provide this assurance and (b) how to develop acceptable generic design allowables for bonded repairs which represent actual failure modes – especially for cyclic loading, since validation by testing of simulated repairs will generally be infeasible. It is concluded that proof testing of bonded repair coupons is a promising approach for validating bond strength and fatigue testing of representative bond joint specimen can provide generic allowables for patch design. For hidden structure or very high value repairs structural health monitoring of repairs based on a strain-transfer approach offers considerable promise.     

Laser and GTAW torch processing of Fe–Cr–B coatings on steel

A comparison has been made of the relationship between microstructure and microhardness developed by surface melting Nanosteel SHS 7170 Fe–Cr–B alloy powder onto a plain carbon steel surface. This powder was initially developed as a high velocity oxyfuel sprayed coating, giving a strength 10 times that of mild steel, and is particularly suitable for surface protection against wear and corrosion. In the present study, the alloy powder was injected into the laser melted surface, while a preplaced powder was melted using the gas tungsten arc welding (GTAW) technique. The laser track consisted of fine dendrites and needle-like microstructures, which produced a maximum hardness value of over 800 HV, while the GTAW track produced a mixture of equiaxed and columnar grain microstructures with a maximum hardness value of 670 HV. The lower hardness values are considered to be associated with dilution and grain size.     

DNA-binding properties of the yeast transcriptional activator,Gcr1p

In Saccharomyces cerevisiae the GCR1 gene product is required for high-level expression of genes encoding glycolytic enzymes. In this communication, we extend our analysis of the DNA binding properties of Gcr1p. The DNA-binding domain of Gcr1p binds DNA with high affinity. The apparent dissociation constant of the Gcr1p DNA-binding domain for one of its specific binding sites (TTTCAGCTTCCTCTAT) is 2·9×10⁻¹⁰ M. However, competition experiments showed that Gcr1p binds this site in vitro with a low degree of specificity. We measured a 33-fold difference between the ability of specific competitor and DNA of random sequence to inhibit the formation of nucleoprotein complexes between Gcr1p and a radiolabeled DNA probe containing its binding site. DNA band-shift experiments, utilizing probes of constant length in which the positions of Gcr1p-binding sites are varied relative to the ends, indicated that Gcr1p–DNA nucleoprotein complexes contain bent DNA. The implications of these findings in terms of the combinatorial interactions that occur at the upstream activating sequence elements of genes encoding glycolytic enzymes are discussed.     

Direct comparison of Eulerian–Eulerian and Eulerian–Lagrangian simulations for particle-laden vertical channel flow

Particle-laden flows in a vertical channel were simulated using an Eulerian–Eulerian, Anisotropic Gaussian (EE-AG) model. Two sets of cases varying the overall mass loading were done using particle sizes corresponding to either a large or small Stokes number. Primary and turbulent statistics were extracted from these results and compared with counterparts collected from Eulerian–Lagrangian (EL) simulations. The statistics collected from the small Stokes number particle cases correspond well between the two models, with the EE-AG model replicating the transition observed using the EL model from shear-induced turbulence to relaminarization to cluster-induced turbulence as the mass loading increased. The EE-AG model was able to capture the behavior of the EL simulations only at the largest particle concentrations using the large Stokes particles. This is due to the limitations involved with employing a particle-phase Eulerian model (as opposed to a Lagrangian representation) for a spatially intermittent system that has a low particle number concentration.     

Cold sintering process: A new era for ceramic packaging and microwave device development

Cold sintering process (CSP) is an extremely low‐temperature sintering process (room temperature to ~200°C) that uses aqueous‐based solutions as transient solvents to aid densification by a nonequilibrium dissolution‐precipitation process. In this work, CSP is introduced to fabricate microwave and packaging dielectric substrates, including ceramics (bulk monolithic substrates and multilayers) and ceramic‐polymer composites. Some dielectric materials, namely Li₂MoO₄, Na₂Mo₂O₇, K₂Mo₂O₇, and (LiBi)_0.5MoO₄ ceramics, and also (1?x)Li₂MoO₄?xPTFE and (1?x)(LiBi)_0.5MoO₄?xPTFE composites, are selected to demonstrate the feasibility of CSP in microwave and packaging substrate applications. Selected dielectric ceramics and composites with high densities (88%‐95%) and good microwave dielectric properties (permittivity, 5.6‐37.1; Q × f, 1700‐30 500 GHz) were obtained by CSP at 120°C. CSP can be also used to potentially develop a new co‐fired ceramic technology, namely CSCC. Li₂MoO₄?Ag multilayer co‐fired ceramic structures were successfully fabricated without obvious delamination, warping, or interdiffusion. Numerous materials with different dielectric properties can be densified by CSP, indicating that CSP provides a simple, effective, and energy‐saving strategy for the ceramic packaging and microwave device development.     

Dielectric studies of the effect of water on the relaxation properties of nitroglycerine-nitrocellulose mixtures

Dielectric relaxation and water adsorption data are reported on mixtures of nitrocellulose and nitroglycerine which have been exposed to moisture to varying degrees. It was observed that the characteristics of these systems depend on the level of nitrogen in the base polymer. At 10.9% hydroxyl sites still exist which can effectively interact with the moisture, whereas at 12.9% the free hydroxyls appear to be incorporated into the ordered semi-crystalline regions of the polymer. The addition of water to nitroglycerine-nitrocellulose mixtures has little effect on the dominant beta relaxation other than to narrow the distribution of relaxations. The relaxation process is, in this case, associated with a cooperative relaxation of nitroglycerine moieties. Water has the effect of decreasing the cooperativity of the beta relaxation process.     

Lycopene from two food sources does not affect antioxidant or cholesterol status of middle-aged adults

Background

Epidemiological studies have reported associations between reduced cardiovascular disease and diets rich in tomato and/or lycopene. Intervention studies have shown that lycopene-containing foods may reduce cholesterol levels and lipid peroxidation, factors implicated in the initiation of cardiovascular disease. The objective of this study was to determine whether consumption of lycopene rich foods conferred cardiovascular protection to middle-aged adults as indicated by plasma lipid concentrations and measures of ex vivo antioxidants.

Methods

Ten healthy men and women consumed a low lycopene diet with no added lycopene (control treatment) or supplemented with watermelon or tomato juice each containing 20 mg lycopene. Subjects consumed each treatment for three weeks in a crossover design. Plasma, collected weekly was analyzed for total cholesterol, high density lipoprotein cholesterol (HDL-C) and triglyceride concentrations and for the antioxidant biomarkers of malondialdehyde formation products (MDA), plasma glutathione peroxidase (GPX) and ferric reducing ability of plasma (FRAP). Data were analyzed using Proc Mixed Procedure and associations between antioxidant and lipid measures were identified by Pearson's product moment correlation analysis.

Results

Compared to the control diet, the lycopene-containing foods did not affect plasma lipid concentrations or antioxidant biomarkers. Women had higher total cholesterol, HDL-C and triglyceride concentrations than did the men. Total cholesterol was positively correlated to MDA and FRAP while HDL-C was positively correlated to MDA and GPX. GPX was negatively correlated to triglyceride concentration.

Conclusions

The inclusion of watermelon or tomato juice containing 20 mg lycopene did not affect plasma lipid concentrations or antioxidant status of healthy subjects. However, plasma cholesterol levels impacted the results of MDA and FRAP antioxidant tests.     

How good are clinical MEDLINE searches? A comparative study of clinical end-user and librarian searches

The objective of this study was to determine the quality of MEDLINE searches done by physicians, physician trainees, and expert searchers (clinicians and librarians). Its design was an analytic survey with independent replication in a setting of self-service online searching from medical wards, an intensive care unit, a coronary care unit, an emergency room, and an ambulatory clinic in a 300-bed teaching hospital. Participating were all M.D. clinical clerks, house, and attending staff responsible for patients in the above settings. Intervention for all participants consisted of a 2-h small group class and 1-h practice session on MEDLINE searching (GRATEFUL MED) before free access to MEDLINE. Search questions from 104 randomly selected novice searches were given to 1 of 13 clinicians with prior search experience and 1 of 3 librarians to run independent searches (triplicated searches). Measurements and main results from these unique citations of the triplicated searches were sent to expert clinicians to rate for relevance (7-point scale). Recall (number of relevant citations retrieved from an individual search divided by the total number of relevant citations from all searches on the same topic) and precision (proportion of relevant citations retrieved in each search) were calculated. Librarians were significantly better than novices for both. Librarians had equivalent recall to, and better precision than, experienced end-users. Unexpectedly, only 20% of relevant citations were retrieved by more than one search of the set of three, with the conclusion that novice searchers on MEDLINE via GRATEFUL MED after brief training have relatively low recall and precision. Recall improves with experience but precision remains suboptimal. Further research is needed to determine the "learning curve," evaluate training interventions, and explore the non-overlapping retrieval of relevant citations by different searchers.