Rat and human pancreatic islet cells contain a calcium ion independent phospholipase A2 activity selective for hydrolysis of arachidonate which is stimulated by adenosine triphosphate and is specifically localized to islet beta-cells

The recent demonstration that myocardial Ca(2+)-independent phospholipase A2 exists as a complex of catalytic and regulatory polypeptides that is modulated by ATP has suggested a novel mechanisms through which alterations in glycolytic flux can be coupled to the generation of eicosanoids which facilitate insulin secretion. To determine the potential relevance of this mechanism, we examined the kinetic characteristics, substrate specificities, and cellular locus of phospholipase A2 activity in pancreatic islets. Rat pancreatic islets contain a Ca(2+)-independent phospholipase A2 activity which is optimal at physiologic pH, preferentially hydrolyzes phospholipid substrates containing a vinyl ether linkage at the sn-1 position, and prefers arachidonic acid compared to oleic acid in the sn-2 position. Rat islet Ca(2+)-independent phospholipase A2 activity is inhibited by the mechanism-based inhibitor (E)-6-(bromomethylene)-3-(1-naphthalenyl)-2H-tetrahydropyran-2-one and is stimulated by ATP. Purification of beta-cells from dispersed pancreatic islet cells by fluorescence-activated cell sorting demonstrated that beta-cells (but not non-beta-cells) contain Ca(2+)-independent, ATP-stimulated phospholipase A2 activity. Remarkably, clonal RIN-m5f insulinoma cells, which possess a defect in glucose-induced insulin secretion, contain a Ca(2+)-independent phospholipase A2 which is not modulated by alterations in ATP concentration. Collectively, these results and those of an accompanying paper [Ramanadham et al. (1993) Biochemistry (following paper in this issue)] implicate Ca(2+)-independent phospholipase A2 as a putative glucose sensor which can couple alterations in glycolytic metabolism to the generation of biologically active eicosanoids and thereby facilitate glucose-induced insulin secretion.     

Action of prostanoids on the emetic reflex of Suncus murinus (the house musk shrew)

Several prostanoids were investigated for a potential to induce emesis in Suncus murinus. The TP receptor agonist 11alpha,9alpha-epoxymethano-15S-hydroxyprosta-5Z,13E-dienoic acid (U46619) induced emesis at doses as low as 3 microg/kg, i.p. but the DP receptor agonist 5-(6-Carboxyhexyl)-1-(3-cyclohexyl-3-hydroxypropyl) hydantoin (BW245C) was approximately 1000 times less potent. The emetic action of U46619 (300 microg/kg, i.p.) was antagonized significantly by the TP receptor antagonist, vapiprost (P<0.05). EP (prostaglandin E(2), 17-phenyl-omega-trinor prostaglandin E(2), misoprostol and sulprostone), FP (prostaglandin F(2alpha) and fluprostenol) and IP (iloprost and cicaprost) receptor agonists failed to induce consistent emesis at doses up to 300-1000 microg/kg, i.p. Fluprostenol reduced nicotine (5 mg/kg, s.c.)-but not copper sulphate (120 mg/kg, intragastric)-induced emesis; the other inconsistently emetic prostanoids were inactive to modify drug-induced emesis. The results indicate an involvement of TP and possibly DP and FP receptors in the emetic reflex of S. murinus.     

Application of an energy source power system stabilizer on the 10MW battery energy storage system at Chino substation

Southern California Edison (SCE) installed a 10 MW battery energy storage system (BESS) at its Chino substation facility in 1988. The BESS facility has been in operation for six years and has been used for load leveling and peaking functions. The BESS power conversion system was built with the then state of the art technology and has a very fast response rate when changing power output of the batteries. SCE installed an energy source power system stabilizer (ESPSS) to test the concept of providing damping of power system swings using the ESPSS. The ESPSS basically modulates the power output/input of the energy storage batteries to respond to system frequency deviations caused by power system oscillations. The ESPSS differs from a conventional power system stabilizer. It is designed to change the power output of the power source rather than the voltage or the reactive power output. While installing the ESPSS several upgrades to the BESS were made to improve reliability. Installation of the ESPSS on the battery enables SCE to test the concept of system stabilization using power source output modulation instead of reactive power modulation. The energy storage batteries provide an easy test bed for conducting field tests and response of the ESPSS to system disturbances. This paper discusses the BESS, the ESPSS and presents recorded results from system disturbance monitoring and field tests conducted on the ESPSS and the batteries     

Amino acid sequence of a four-iron-four-sulphur ferredoxin isolated from Bacillus stearothermophilus

A novel method of RNA fractionation based on a gradual release of the RNA molecules from ribonucleoprotein complexes has been used for the analysis of ribosomal and non-ribosomal complexes of rat liver cytoplasm. Adsorption of native ribonucleoproteins on a Celite column (occuring through only the protein moiety) followed by a consequent dissociation of RNP complexes brought about by various agents results in RNA fractionation in accordance with the tightness of the RNA-protein bonds. The cytoplasmic ribosomal and rapidly labelled non-ribosomal RNA species are separated into several fractions identified as 18S and 28S rRNA's, mRNA and messenger-like RNA. A relatively small fraction (about 10% of the total) of rRNA tenaciously bound to protein has been also revealed.     

Postoperative radiation for squamous cell carcinoma metastatic to cervical lymph nodes from an unknown primary site: outcomes and patterns of failure

BACKGROUND: This retrospective study assesses the outcomes and patterns of failure in patients with squamous cell carcinoma metastatic to cervical lymph nodes from an unknown primary site treated with combined surgery and postoperative radiotherapy. METHODS: One hundred thirty-six patients with squamous cell carcinoma metastatic to cervical lymph nodes from an unknown primary source were treated postoperatively with radiotherapy at the University of Texas M. D. Anderson Cancer Center between the years 1968 and 1992. Stage distribution was: N1, 31 patients; N2a, 49; N2b, 25; N2c, 3; N3, 18; and Nx, 10. Thirty-nine patients had excisional biopsies only, 64 patients underwent modified neck dissections, and 33 had radical neck dissections. Extracapsular extension was present in 87 cases. Fifty-nine patients had multiple nodes involved. The median duration of follow-up for surviving patients was 8.7 years. RESULTS: Twelve patients, all with extracapsular nodal disease, developed regional relapse. The 5-year actuarial rates of regional relapse in patients with and without extracapsular nodal disease were 16% and 0%, respectively (p = .004). Nine patients (22%) with extracapsular disease and multiple nodes relapsed compared with three patients (7%) with extracapsular disease and a solitary node (p = .02). None of the patients treated with excisional biopsy and radiotherapy relapsed regionally. No statistically significant relationship between dose, treatment duration, time interval between surgery, and the start of radiotherapy and relapse was detected. The 2-, 5-, and 10-year actuarial disease-specific survival rates were 82%, 74%, and 68%, respectively. Fourteen patients developed cancers in head and neck mucosal sites; six of these cancers were located in unirradiated tissues. CONCLUSIONS: Relapse occurred infrequently in patients treated with excisional biopsies and postoperative radiotherapy. Extracapsular extension and multiple nodes were associated with worse regional control and disease-specific survival. These results appear consistent with those expected for patients with advanced neck disease and a known primary site, and the absence of a primary site should not exclude patients from studies aiming to improve outcomes in patients with extensive neck disease from a head and neck squamous cell cancer. We continue to recommend radiation to the necks and pharyngeal axis for patients suspected of having residual microscopic disease following surgery for squamous cell carcinoma metastatic to the neck from an unknown primary site.     

An investigation on the role of ytterbium in ytterbium promoted γ-alumina-supported nickel catalysts for dry reforming of methane

Addition of low quantities of ytterbium to sol–gel prepared Ni/γ-Al₂O₃ catalysts has been shown to lead to significant increases in catalytic activity and long term stability in the catalytic conversion of CO₂ and CH₄ into syngas (H₂ and CO). The role of ytterbium in these catalysts was investigated in this study through detailed investigations on the structure and composition of ytterbium promoted Ni/γ-Al₂O₃ catalysts using the following techniques: synchrotron X-ray diffraction, X-ray Photoemission Spectroscopy, Transmission Electron Microscopy, Scanning Electron Microscopy/Energy Dispersive X-ray analysis, Temperature Programmed Reduction techniques and N₂ adsorption–desorption isotherms. The results obtained indicated that ytterbium, at small quantities (up to 2 wt%), interacted strongly with the support which in turn altered the interaction between nickel and the support (most notably it was found to completely inhibit the formation of NiAl₂O₄). This decreased interaction between Ni and the support also led to a higher quantity of Ni being present in the catalyst in the form of Ni.     

Effect of thermomechanical treatments on the room-temperature mechanical behavior of iron aluminide Fe3AI

The room-temperature hydrogen embrittlement (HE) problem in iron aluminides has restricted their use as high-temperature structural materials. The role of thermomechanical treatments (TMT),i.e., rolling at 500 °C, 800 °C, and 1000 °C, and post-TMT heat treatments,i.e., recrystallization at 750 °C and ordering at 500 °C, in affecting the room-temperature mechanical properties of Fe-25A1 intermetallic alloy has been studied from a processing-structure-properties correlation viewpoint. It was found that when this alloy is rolled at higher temperature, it exhibits a higher fracture strength. This has been attributed to fine subgrain size (28/μ) due to dynamic recrystallization occurring at the higher rolling temperature of 1000 °C. However, when this alloy is rolled at 1000 °C and then recrystallized, it shows the highest ductility but poor fracture strength. This behavior has been ascribed to the partially recrystallized microstructure, which prevents hydrogen ingress through grain boundaries and minimizes hydrogen embrittlement. When the alloy is rolled at 1000 °C and then ordered at 500 °C for 100 hours, it shows the highest fracture strength, due to its finer grain size. The alloy rolled at 500 °C and then ordered undergoes grain growth. Hence, it exhibits a lower fracture strength of 360 MPa. Fracture morphologies of the alloy were found to be typical of brittle fracture,i.e., cleavage-type fracture in all the cases.     

Electrical characterization and parameter extraction of organic thin film transistors using two dimensional numerical simulations

In this paper a performance based comparison of top and bottom contact organic thin film transistor (OTFT) device structures, using two dimensional numerical simulations has been carried out. In addition to this, investigations pertaining to the estimation of contact resistance in these OTFTs were also performed. To estimate contact resistance the conventional transmission line method and modified transmission line method (M-TLM) were respectively invoked. Our simulation results clearly indicate that the latter is more accurate in the estimation of contact resistance compared to the conventional method. Furthermore, the M-TLM was used to estimate the gate voltage and film thickness dependence of the contact resistance for the two device structures. The observed results have been explained on the basis of the significantly lowered area of carrier injection and extraction regions, at the source/channel and channel/drain interface respectively, in bottom contact transistor that lead to its inferior performance over the top contact transistor.     

Characterisation of a uranium ore using multiple X-ray diffraction based methods

Uranium bearing ores are often a complex mixture of minerals and compounds, a number of which are not of economic importance and are commonly referred to as gangue materials. In order to improve the efficiency of the dissolution stage of the overall uranium extraction process, a greater understanding of the minerals and compounds present in the ore is required. A greater knowledge of the gangue materials present is important as they can influence various aspects of the dissolution process such as providing potential adsorption sites for aqueous uranium species and through influencing the equilibrium of reactions involving aqueous uranium species. In this study the mineralogy of a uranium ore was investigated using a range of X-ray diffraction (XRD) based methods including in situ high temperature XRD and XRD using a synchrotron beam line. The results obtained from standard XRD (Cu Kα), high temperature XRD and synchrotron XRD (16.534 keV) were compared and a number of minerals were identified. The improved spatial resolution and intensity of the synchrotron data allowed for superior phase identification of a variety of minerals where standard X-ray techniques gave inconclusive results.