A method for transformation of engineering bill of materials to maintenance bill of materials

In order to solve the transformation problem of Bill of Materials (BOM) from engineering BOM to maintenance BOM for Maintenance, Repair and Overhaul (MRO) systems, a formal transformation model of BOM view is proposed. In this model, the intermediate component, inherited component, virtual component are defined in the specific maintenance management domain, and the transformation process from engineering BOM to maintenance BOM is discussed through feature recognition methods and rules. The proposed transformation model has been developed and deployed in an MRO system for a steel manufacturing enterprise.     

应用免疫斑点法检测不同工艺灭活的乙肝血源疫苗中的前S_1和S_2蛋白

作者应用前 S_1、前 S_2和 HBsAg/a 单克隆抗体,用免疫斑点法(Immuno-spot)检测同一批的乙肝表面抗原分别经加热灭活和三步化学灭活后的前 S_1和前 S_2蛋白保留情况,比较了两种工艺对前 S_1和前 S_2蛋白的影响。结果表明;加热灭活可保留前 S_1和前 S_2蛋白,三步化学灭活使前 S_1和前 S_2蛋白丢失,从抗原组成上看,加热灭活后的抗原更接近自然抗原。首次报告了含有前 S_1蛋白的乙肝疫苗,并对前 S_1和前 S_2蛋白在乙肝血源疫苗中的可能作用进行了讨论。     

Thermotropic polyester carbonates. III. Thermotropic polyester carbonates as self-reinforced plastics

Thermotropic polyester carbonates derived from t-butylhydroquinone, methylhydroquinone, diphenyl terephthalate, and diphenyl carbonate in the molar ratio of 50 : 50 : 55 : 45; 50 : 50 : 57.5 : 5 : 42.5 and 50 : 50 : 60 : 40 can be injection molded successfully from temperatures 10°C below melting to 30–40°C above melting. Normally the best molding temperatures are 10–20°C above melting. If the molding conditions are controlled properly, tensile strengths as high as 1.8 × 10⁴ psi, tensile moduli as high as 7.4 × 10⁵ psi, and flex moduli as high as 1.1 × 10⁶ psi can be obtained.     

From a theoretical model to a predictive simulation model of operator interaction with support systems: designing experiments to build the numerical simulation

In this paper, we will discuss a methodology developed and applied in the European ITERATE project with the objective of designing experiments that will provide data to seed the numerical model of operator behaviour in different surface transport modes: road vehicles, rail transport and ships. The experiments aim to investigate how new technologies support different types of operators in different contexts. A structured approach was adopted. Firstly, an initial selection of the systems to be investigated was made, describing the support they provide for operators. Hypotheses were formulated on the effects of operator parameters on the interaction with the systems. A final selection of systems for the experiments was made, focusing on systems providing support for collision avoidance and speed management. The operator parameters (culture, attitude and personality, experience, driver state (such as fatigue) and the demands of the task) were operationalised and piloted. The next step was the development of scenarios to be implemented in a driving simulator. In the last step, the final experiments were designed and detailed.     

基于VB的球面网壳施工控制系统设计

根据球面网壳的施工特点,采用VB6.0编制了球面网壳施工控制系统。根据系统的数据特点,采用MicrosoftExcel作为数据库。使用OLE控件调用AutoCAD软件,绘制三维结构模型图。使用Image控件和Line控件设计工具栏。系统根据施工误差对施工时可能出现的问题进行预警,有利于提高球面网壳的施工质量。     

Spherical Aluminum Nitride Fillers for Heat-Conducting Plastic Packages

It is necessary for encapsulants to have not only a suitable coefficient of thermal expansion (CTE) compatible to IC devices and a low dielectric constant to reduce the device propagation delay, but also a high thermal conductivity to dissipate large amounts of heat from power-hungry, high-speed IC and high-density packages. Fillers such as silica have been mixed with polymers to improve their properties. Aluminum nitride (AlN) is considered as an alternative one, because it has a higher theoretical thermal conductivity of ∼320 W/mK¹, a compatible CTE with silicon chips and a low dielectric constant. Commercial AlN fillers are angular in shape, because they are prepared via grinding coarse AlN powders synthesized by direct nitridation of aluminum metal and classification. The angular AlN are not expected to have high fluidity when mixed with polymers and hence low packing density. Recently, we successfully obtained single-crystalline spherical AlN fillers. Furthermore, polymer composites filled with the spherical AlN showed excellent thermal conductivity (>8 W/mK) as encapsulants for dissipating the heat generated in electronic devices.     

浅析无线网现状及相关技术

无线网作为一种现代化的技术手段,随着网络信息技术的不断发展完善,在实际中的应用越来越广泛和普遍,对于无线网技术的研究与关注内容也越来越多,进行无线网现状以及相关技术的研究分析,有利于促进无线网在实际应用中的改进和提升,具有积极的作用和意义。下文将结合无线网在实际网络通信传输中的应用现状,以网络建设中的安全管理为例,对其安全保护现状以及存在的问题、解决措施等进行分析论述。     

三维编织复合材料编织工艺过程仿真研究

总结了四步编织工艺的运动规律。对纱线的空间坐标进行三次B样条曲线拟合得到拟合坐标;设计实现了纱线实体的静态模型算法,根据拟合坐标得到纱线空间网格坐标并建立了纱线实体的静态模型;实现了纱线轨迹的动态展示以及实体生成过程的动态展示;构建了GUI界面并编译成了可脱离Matlab环境的独立运行程序。     

Factors influencing magnetic polymer microspheres prepared by dispersion polymerization

Magnetic iron oxide (Fe₃O₄) was prepared by a coprecipitation method. Core–shell composite magnetic polymer microspheres with carboxyl groups were synthesized by the dispersion polymerization of styrene and acrylic acid in the presence of magnetic oxide, and dibenzoyl peroxide was used as an initiator. The synthesized magnetic polymer microspheres were characterized with X‐ray diffraction, transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, and so forth. The results indicated that the product was single‐phase Fe₃O₄, and its average size was about 10 nm. The configuration of the microspheres, which contained carboxyl groups, was spherical, and the average size was about 2 μm. The results of vibrating sample magnetometry tests showed that the magnetic powders produced by different surfactants had different saturation magnetizations. When poly(ethylene glycol) with a weight‐average molecular weight of 4000 was used as a surfactant, the saturation magnetization of the samples reached 69.2 emu/g. The factors that affected the shape, magnetism, size, and distribution of the microspheres were also studied. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007