A 32-bit PowerPC system-on-a-chip with support for dynamic voltage scaling and dynamic frequency scaling

A PowerPC system-on-a-chip processor which makes use of dynamic voltage scaling and on-the-fly frequency scaling to adapt to the dynamically changing performance demands and power consumption constraints of high-content, battery powered applications is described. The PowerPC core and caches achieve frequencies as high as 380 MHz at a supply of 1.8 V and active power consumption as low as 53 mW at a supply of 1.0 V. The system executes up to 500 MIPS and can achieve standby power as low as 54 /spl mu/W. Logic supply changes as fast as 10 mV//spl mu/s are supported. A low-voltage PLL supplied by an on-chip regulator, which isolates the clock generator from the variable logic supply, allows the SOC to operate continuously while the logic supply voltage is modified. Hardware accelerators for speech recognition, instruction-stream decompression and cryptography are included in the SOC. The SOC occupies 36 mm/sup 2/ in a 0.18 /spl mu/m, 1.8 V nominal supply, bulk CMOS process.     

Interaction buckling-progressive deformation

The interaction between buckling and ratchetting under cyclic additional loading is discussed for elastic-plastic structures. It is shown that progressive plastic deformation can lead to the buckling of a structure as a consequence of the resulting additional displacement. This interaction is particularly strong in perfect plasticity. In the case of kinematic hardening materials, an estimate of the primary loading is given in order to prevent the risk of ratchetting. It is shown that elastic and plastic shake-down theorems still hold when the primary load is smaller than the smallest critical load of tangent modulus.     

Effects of spray drying conditions on the physicochemical and antioxidant properties of the Gac (Momordica cochinchinensis) fruit aril powder

Gac fruit aril has an attractive orange red colour and very high level of carotenoids, giving it exceptional antioxidant properties. However, spray drying of this material has not been successful and malto dextrin is considered as a suitable drying aid to preserve its colour and antioxidant properties. This paper reports the effects of inlet drying air temperature (120, 140, 160, 180 and 200 °C) and maltodextrin addition (10%, 20% and 30%) on the physicochemical and antioxidant properties of the Gac aril powder. Moisture content and bulk density, colour characteristics, total carotenoid content (TCC), encapsulation efficiency and total antioxidant activity (TAA) were significantly affected by maltodextrin concentration and the inlet air temperatures. However, pH, a_w and water solubility index were not significantly influenced by the spray drying conditions. Overall, a good quality Gac powder in terms of colour, TCC and TAA can be produced by spray-drying at inlet temperature of 120 °C and adding maltodextrin concentration at 10% w/v.     

Influence of salt concentration on the salting kinetics of cod loin (Gadus morhua) during brine salting

The influence of different salt concentrations of 6%, 15%, 18% and 24% (w/w) on mass transfer of water and salt during brine salting of cod loins was studied. An increase in salt concentration accelerated water exudation and salt diffusion in the cod loins. Weight gain of the cod loins increased with decreasing salt concentration and the cod loins in the 6% brine had the highest process yield. The salting kinetic parameter values for total and water weight changes decreased with increasing salt concentration. Inversely, higher salting kinetic parameter values for salt weight changes were observed for higher brine concentrations. The samples brined at 18% and 24% had identical effective diffusion coefficients and the highest effective diffusion value was found in the cod loins brined at 15%.     

Evaluating the impact of thermal and pressure treatment in preserving textural quality of selected foods

A study was conducted to evaluate the efficacy of various combinations of pressure and thermal treatments in preserving textural quality of selected foods. Carrot, zucchini, apricot, red radish, and jicama were used as test samples. Pressure-assisted thermal processing (PATP; 600 MPa, 105 °C), high-pressure processing (HPP; 600 MPa, 25 °C), and thermal processing (TP; 105 °C, 0.1 MPa) experiments were conducted. Role of pressure (600 MPa) in preserving product quality while simultaneously (PATP) or sequentially (HPP-TP) exposed to elevated process temperature (105 °C) was also compared. Instrumental puncture, shear force, color and sensory analyses were utilized to compare the influence of the various process treatments. A crunchiness index (CI), relating product puncture force and stiffness, was able to characterize the severity of the process treatments on various products tested. Among the treatments, TP was the worst at retaining texture, but HPP-TP improved texture retention. In comparison to TP alone, PATP better retained texture and color. Jicama was least influenced by the treatments as compared to products tested. Process treatments investigated degraded the textural quality of zucchini and apricot. Instrumental CI results were also in agreement with the sensory data of carrot, red radish and jicama samples.     

Conductive Materials for Proton Exchange Membrane Fuel Cell Bipolar Plates Made from PVDF,PET and Co‐continuous PVDF/PET Filled with Carbon Additives

The aim of this work was to develop and characterise electrically conductive materials for proton exchange membrane fuel cells and bipolar plates (BPPs). These BPPs were made from highly conductive blends of polyethylene terephthalate (PET) and polyvinylidene fluoride (PVDF), as matrix phase. The conductive materials were developed from carefully formulated blends composed of conductive carbon black (CB) powder and, in some cases, graphite synthetic flakes mixed with pure PET, PVDF or with PVDF/PET systems. They were first developed by twin‐screw extrusion process then compression‐molded to give BPP final shape. As the developed blends have to meet properties suitable for BPP applications, they were characterised for their rheological properties, electrical through‐plane resistivity (the inverse of conductivity), oxygen permeability, flexural and impact properties. Results showed that lower resistivity was obtained with PVDF/CB blends due to the higher interfacial energy between the PVDF matrix and CB and also the higher density and crystallinity of PVDF, compared to those of PET. It was also observed that the lowest resistivity values were obtained with mixing PVDF and PET at controlled compositions to ensure PVDF/PET co‐continuous morphology. Also, slow cooling rates helped to attain the lowest values of through‐plane resistivity for all studied blends. This behaviour was related to the higher crystallinity obtained with low cooling rates leading to smaller amorphous regions in which carbon particles are much more concentrated.     

A Backside-Illuminated Image Sensor With 200 000 Pixels Operating at 250 000 Frames per Second

In this paper, a high-speed image sensor with very high sensitivity is developed. The high sensitivity is achieved by introduction of backside illumination and charge-carrier multiplication (CCM). The high frame rate is guaranteed by installing the in situ storage image sensor (ISIS) structure on the front side. A test sensor of the BSI-ISIS has been developed and evaluated. It is shown that an image with a very low signal level embedded under the noise floor is recognizable by activating the CCM.     

A Binary-Weighted Switching and Reconfiguration-Based Programmable Gain Amplifier

In previous works, the authors reported on binary-weighted switching and reconfiguration techniques to design programmable gain amplifiers (PGAs) with a wide decibel (dB)-linear range, a small gain error, a wide 3-dB bandwidth, and high linearity. In this brief, two techniques are analyzed in more detail. Adopting the two techniques, a new low-voltage PGA version is proposed that offers a precise and process/temperature-insensitive gain and achieves a double dB-linear range with a small gain error while maintaining the same chip size, as compared with those of previous designs. Implemented in 0.18-mum CMOS, from the measurements, the proposed PGA shows a dB-linear gain range of 42 dB (-21 to 21 dB) with a gain error of less than plusmn 0.54 dB, a maximum input-referred third-order intercept point (IIP3) of 14 dBm, and a 3-dB bandwidth of 60 MHz at the maximum gain while consuming only 2.1 mA from a 1.5-V supply.     

Role of acidic sphingomyelinase in thymol‐mediated dendritic cell death

Scope : Thymol is a component of several plants with antimicrobial activity. Little is known about the effects of thymol on immune cells of the host. This study addressed the effects of thymol on dendritic cells (DCs), regulators of innate and adaptive immunity. Methods and results : Immunohistochemistry, Western blotting and fluorescence‐activated cell sorting analysis were performed in bone marrow‐derived DCs either from wild‐type mice or from mice lacking acid sphingomyelinase (ASM^?/?) treated and untreated for 24 h with thymol (2–100 μg/mL). Thymol treatment resulted in activation of ASM, stimulation of ceramide formation, downregulation of anti‐apoptotic Bcl‐2 and Bcl‐xL proteins, activation of caspase 3 and caspase 8, DNA fragmentation as well as cell membrane scrambling. The effects were dependent on the presence of ASM and were lacking in ASM^?/? mice or in wild‐type DCs treated with sphingomyelinase inhibitor amitriptyline. Conclusion : Thymol triggers suicidal DC death, an effect mediated by and requiring activation of ASM.     

A role for water molecules in DNA-ligand minor groove recognition

Targeting the minor groove of DNA through binding to a small molecule has long been considered an important molecular-recognition strategy in biology. A wide range of synthetic heterocyclic molecules bind noncovalently in the minor groove of the double helix and are also effective against a number of human and animal diseases. A classic structural concept, the isohelicity principle, has guided much of this work: such heterocyclic molecules require a shape that complements the convex surface of the minor groove. Researchers have used this principle to design molecules that can read DNA sequences. This principle also predicts that molecules that lack the complementary shape requirement would only bind weakly to DNA. Recently, however, researchers have unexpectedly found that some essentially linear compounds, which do not have this feature, can have high DNA affinity. In this Account, we discuss an alternative recognition concept based on these new findings. We demonstrate that highly structured water molecules can play a key role in mediating between the ligand and DNA minor groove without loss of binding affinity. Combined structural and thermodynamic approaches to understanding the behavior of these molecules have shown that there are different categories of bound water in their DNA complexes. For example, application of this water-bridging concept to the phenylamidine platform has resulted in the discovery of molecules with high levels of biological activity and low nonspecific toxicity. Some of these molecules are now in advanced clinical trials.