Synthesis and application of core–shell particles as toughening agents for epoxies

Poly(butadiene-co-styrene) [P(B-S)] core-poly(methyl methacrylate) (PMMA) shell particles were prepared using a two-step emulsion polymerization. These core-shell particles were used to toughen an epoxy polymer. The role of particle-epoxy interfaces were studied by systematically varying the shell compositions of the core-shell particles such as PMMA, P[MMA-acrylonitrile (AN)], P[MMA-glycidyl methacrylate (GMA)] and P[MMA-divinyl benzene(DVB)]. Therefore, the nature of the particle-epoxy interfaces is varied in terms of physical interactions and chemical bonding. The fracture toughness values of the toughened epoxies were measured using linear elastic fracture mechanics. Results indicate that the morphology of the dispersed particles in the epoxy matrix plays an important role in the toughening of epoxies. This degree of dispersion can be varied by incorporating AN and GMA comonomers in the PMMA shells or by crosslinking the shell. In summary, nanoscale interactions of the rubber-matrix interface do not directly influence fracture toughness, instead, it was found that the nanoscale interactions could be used to control the blend morphology which has a dramatic effect on toughness. © 1995 John Wiley & Sons, Inc.     

A novel technique for the preparation of secondary fatty amides

A technique for the synthesis of monosubstituted fatty amides at low temperature and ambient pressure was developed. This method involved the condensation of an amine with a triacylglycerol. The primary amine (ethyl,n-butyl,n-hexyl andn-octyl were tested) acted as reagent and solvent for the fatty substrates. No additional organic solvent or catalyst was added. Tallow, vegetable oils and fish oil all served well as substrates, as did pure tripalmitin. The rate of amidation was dependent upon temperature and the ratio of fat to amine. In a series of experiments conducted with tallow andn-butylamine at a fat:amine molar ratio of 1:16, amidation could be carried out at 20°C, producingn-butyltallowamide in 83% yield in 24 hr. When the fat:amine molar ratio was reduced to 1:8, and the temperature raised to 45°C, the amide yield was 87.6% in 24 hr. When the reaction was carried out at the boiling point ofn-butylamine (78°C) and at a fat:amine ratio of 1:8, the amide yield was 93.2% in 4 hr. The reaction progressed more rapidly with higher molecular weight amines. The identity and purity of the amides was assessed by thin-layer chromatography and confirmed by elemental analyses and infrared and C¹³ nuclear magnetic resonance spectroscopy.     

Expert judgement on the long term possibilities of conventional emission abatement technologies for passenger cars

Topics in Catalysis - This paper presents the results of a quantitatively substantiated “expert judgement” concerning the potential for further reduction of the exhaust emissions of...     

High-Thermal-Conductivity Aluminum Nitride Ceramics: The Effect of Thermodynamic, Kinetic, and Microstructural Factors

Improvement in the thermal conductivity of aluminum nitride (AlN) can be realized by additives that have a high thermodynamic affinity toward alumina (Al₂O₃), as is clearly demonstrated in the aluminum nitride-yttria (AlN-Y₂O₃) system. A wide variety of lanthanide dopants are compared at equimolar lanthanide oxide:alumina (Ln₂O₃: Al₂O₃, where Ln is a lanthanide element) ratios, with samaria (Sm₂O₃) and lutetia (Lu₂O₃) being the dopants that give the highest- and lowest-thermal-conductivity AlN composites, respectively. The choice of the sintering aid and the dopant level is much more important than the microstructure that evolves during sintering. A contiguous AlN phase provides rapid heat conduction paths, even at short sintering times. AlN contiguity decreases slightly as the annealing times increase in the range of 1–1000 min at 1850°C. However, a substantial increase in thermal conductivity results, because of purification of AlN grains by dissolution-reprecipitation and bulk diffusion. Removal of grain-boundary phases, with a concurrent increase in AlN contiguity, occurs at high annealing temperatures or at long times and is a natural consequence of high dihedral angles (poor wetting) in liquidphase-sintered AlN ceramics.     

Optimizing BRDF orientations for the manipulation of anisotropic highlights

This paper introduces a system for the direct editing of highlights produced by anisotropic BRDFs, which we call anisotropic highlights. We first provide a comprehensive analysis of the link between the direction of anisotropy and the shape of highlight curves for arbitrary object surfaces. The gained insights provide the required ingredients to infer BRDF orientations from a prescribed highlight tangent field. This amounts to a non‐linear optimization problem, which is solved at interactive framerates during manipulation. Taking inspiration from sculpting software, we provide tools that give the impression of manipulating highlight curves while actually modifying their tangents. Our solver produces desired highlight shapes for a host of lighting environments and anisotropic BRDFs.     

The effect of trans-isomers on the physical properties of hydrogenated oils

Data have been presented which indicate a positive relationship between thetrans-isomer content of a hydrogenated oil and the congeal point, Wiley melting-point, and solids index. It has also been shown that cottonseed oil and soybean oil undergo substantially the same type of reaction under identical hydrogenating conditions. This conclusion is based on the relationship oftrans-isomer formation to total reduction in unsaturation up to the point that equilibrium is reached and saturation of thetrans-isomers occurs. This equilibrium was noted at between 60–70 iodine value. The relationship oftrans-isomer formation to the total reduction in double bonds can be expressed as the hydrogenation index. This is a reliable indication of the type of reaction taking place up to the point where appreciable hydrogenation of thetrans-isomers occur.     

The effect of solution variables on the solution of cellulose in dimethyl sulfoxide

Through the study of the effects of concentration, temperature, and molar ration (of paraformaldehyde to cellulose) on solution viscosity and per cent transmittance (at 530 nm), it has been demonstrated that cellulose solutions in dimethyl sulfoxide (DMSO) are readily produced. By heating 1, 2, and 50 to 100 parts by weight of cellulose, paraformaldehyde, and DMSO, respectively, extremely viscose cellulose solutions and gels were prepared. Solutions with concentrations as high as 10% were prepared. However, the optimum conditions to effect complete cellulose solution in DMSO at 75°C were found to be 0.5% cellulose and 0.8 and 1.0% paraformaldehyde. This corresponds to a paraformaldehyde-to-cellulose molar ratio of about 10:1.     

Microemulsions with excellent water solubilizing capacity at high hydrocarbon levels with quaternary ammonium salts as surfactants

In W/O microemulsions prepared by adding dry surfactant to a mixture of 85% heptane or toluene and 15% pentanol, then titrating with water, systems using quaternary ammonium salts have been shown to be capable of solubilizing much larger amounts of water than systems using the anionic sodium dodecyl sulfate. In homologous series in the range C₁₂ to C₁₆ it would appear that, with one exception, longer chain length quaternary salts are more effective at solubilizing water than are shorter chain length compounds. With quaternary salts of equal chain length, pyridinium salts are more effective at solubilizing water at high surfactant concentrations than are corresponding trimethyl salts.     

Dynamic mechanical analysis of polymers in the liquid state: Use of a perforated shim stock support

This report summarizes some initial results on the use of a perforated brass shim stock support to extend the useful range of dynamic mechanical testing well over 100 degrees above the traditional limiting polymer softening points of T_g or T_m. Weak secondary relaxations were observed above T_g in both polyisobutylene (PIB) and polystyrene (PS) homopolymer, copolymer, and blend systems and above T_m in gutta percha (trans-polyisoprene). The DuPont 981 Dynamic Mechanical Analyzer (DMA)–990 Thermal Analyzer system was used to characterize these weak liquid state processes. The DMA instrument deforms the specimen in flexure, thus minimizing the shear component present in some other techniques. Specimen-coating weights are typically in the range 20–40 mg. The perforations are particularly useful for polymers having low inherent adhesion to metals or systems which are very brittle in the glassy state, e.g., low MW PS's and many methacrylates.     

ANALYTICAL SOLUTIONS FOR PEELING USING BEAM-ON-FOUNDATION MODEL AND COHESIVE ZONE

When fibrillation occurs during peeling, the normal stress in the adhesive may gradually reduce to zero at the peel front. The shear stress also reduces to zero. Classical beam-spring (or beam-on-elastic-foundation) models do not yield solutions that have these properties. With the use of a beam-on-foundation model combined with a cohesive zone in the neighborhood of the peel front, these properties can be satisfied. In order to obtain analytical solutions, peel tests are considered in which the backing has a small slope and is linearly elastic in the adhered region, and the traction law is assumed to be piecewise linear. Cases are considered with only normal stresses in the adhesive (mode I), only shear stresses (mode II), and both stresses coupled (mixed-mode behavior). Analytical solutions are obtained for displacements of the backing, forces in the backing, and stresses between the adhesive and the backing.