CPW bandstop filter using slot-type SRRs

The bandstop characteristic of a slot-type split-ring resonator (SRR) on a substrate used for microwave frequencies is presented for a bandstop filter. Analogously to the conventional strip-type SRR, the slot-type SRR is very attractive for notching unwanted band because of its small dimension and high Q operation. In addition, the complementary SRR can be easily applied for coplanar configuration, which is favourable to MMIC designs. Based on the simulation and measurement results, the slot-type SRR for the bandstop filter is very effective in rejecting unwanted frequency in terms of its selectivity and size.     

Delay calculation capturing crosstalk effects due to coupling capacitors

A driver model to calculate gate and interconnect delays accurately for a chip with coupling capacitors is presented. The crosstalk effects between simultaneously switching victim and aggressors are effectively captured by iteratively solving an N-port RC network. The algorithm was implemented in a delay calculation tool called XINT and its accuracy demonstrated for industrial designs.     

Effects of extended dislocations on charge distribution in GaN epilayer

We have investigated the effect of extended dislocations (0.5-3 μm) on charge distribution in GaN epilayer grown by metalorganic chemical vapor deposition on (0001) sapphire using atomic force microscopy (AFM) and scanning surface potential microscopy (SSPM). It has been observed for the surface at the extended dislocations present in undoped GaN film to be negatively charged showing 0.04-0.2 V higher potential relative to regions that contain no dislocations. In addition to the higher potential at the dislocation core, the surrounding surfaces, including the edge of the dislocations, are also negatively charged in a symmetric way around the dislocations revealing crater-shaped higher potential regions (∼0.04 V) relative to surrounding dislocation-free area. The experimental results show that the protrusion-type of dislocation is also negatively charged and its potential is dependent on the size of dislocation.     

Text-line extraction in handwritten Chinese documents based on an energy minimization framework

Text-line extraction in unconstrained handwritten documents remains a challenging problem due to nonuniform character scale, spatially varying text orientation, and the interference between text lines. In order to address these problems, we propose a new cost function that considers the interactions between text lines and the curvilinearity of each text line. Precisely, we achieve this goal by introducing normalized measures for them, which are based on an estimated line spacing. We also present an optimization method that exploits the properties of our cost function. Experimental results on a database consisting of 853 handwritten Chinese document images have shown that our method achieves a detection rate of 99.52% and an error rate of 0.32%, which outperforms conventional methods.     

Compact Quantum-Dot Microbeads with Sub-Nanometer Emission Linewidth

Fluorescent microbeads are widely used for applications in life sciences and medical diagnosis. The spectral contrast and sharpness of photoluminescence are critical in the utilities of microbeads for imaging and multiplexing. Here, microbeads capable of generating single-peak laser emission with a sub-nanometer linewidth are demonstrated. The microbeads are made of quantum dots that are tightly packed and crosslinked via ligand exchange for high optical gain and refractive index as well as material stability. Bright single-mode lasing with no photobleaching is achieved with particle diameters as small as 1.5 µm in the air. Sub-nm lasing emission is maintained even inside high-index surroundings, such as organic solvents and biological tissues. Feasibility of intracellular tagging and multi-color imaging in vivo is demonstrated.     

Digital Laser Micropainting for Reprogrammable Optoelectronic Applications

Structural coloration is closely related to the progress of innovative optoelectronic applications, but the absence of direct, on-demand, and rewritable coloration schemes has impeded advances in the relevant area, particularly including the development of customized, reprogrammable optoelectronic devices. To overcome these limitations, a digital laser micropainting technique, based on controlled thin-film interference, is proposed through direct growth of the absorbing metal oxide layer on a metallic reflector in the solution environment via a laser. A continuous-wave laser simultaneously performs two functions—a photothermal reaction for site-selective metal oxide layer growth and in situ real-time monitoring of its thickness—while the reflection spectrum is tuned in a broad visible spectrum according to the laser fluence. The scalability and controllability of the proposed scheme is verified by laser-printed painting, while altering the thickness via supplementary irradiation of the identical laser in the homogeneous and heterogeneous solutions facilitates the modification of the original coloration. Finally, the proof-of-concept bolometer device verifies that specific wavelength-dependent photoresponsivity can be assigned, erased, and reassigned by the successive application of the proposed digital laser micropainting technique, which substantiates its potential to offer a new route for reprogrammable optoelectronic applications.     

A Low‐Complexity 128‐Point Mixed‐Radix FFT Processor for MB‐OFDM UWB Systems

In this paper, we present a fast Fourier transform (FFT) processor with four parallel data paths for multiband orthogonal frequency‐division multiplexing ultra‐wideband systems. The proposed 128‐point FFT processor employs both a modified radix‐2⁴ algorithm and a radix‐2³ algorithm to significantly reduce the numbers of complex constant multipliers and complex booth multipliers. It also employs substructure‐sharing multiplication units instead of constant multipliers to efficiently conduct multiplication operations with only addition and shift operations. The proposed FFT processor is implemented and tested using 0.18 µm CMOS technology with a supply voltage of 1.8 V. The hardware‐ efficient 128‐point FFT processor with four data streams can support a data processing rate of up to 1 Gsample/s while consuming 112 mW. The implementation results show that the proposed 128‐point mixed‐radix FFT architecture significantly reduces the hardware cost and power consumption in comparison to existing 128‐point FFT architectures.     

Transforming One‐Dimensional Nanowalls to Long‐Range Ordered Two‐Dimensional Nanowaves: Exploiting Buckling Instability and Nanofibers Effect in Holographic Lithography

Two‐dimensional nanowaves with long‐range order are fabricated by exploiting swelling‐induced buckling of one‐dimensional (1D) nanowalls with nanofibers formed in‐between during holographic lithography of the negative‐tone photoresist SU‐8. The 1D film goes through a constrained swelling in the development stage, and becomes buckled above the critical threshold. The degree of lateral undulation can be controlled by tuning the pattern aspect ratio (height/width) and exposure dosage. At a high aspect ratio (e.g., 6) and a high exposure dosage, nanofibers (30–50 nm in diameter) are formed between the nanowalls as a result of overlapping of low crosslinking density regions. By comparing experimental results with finite‐element analysis, the buckling mechanism is investigated, which confirms that the nanofibers prevent the deformed nanowalls from recovery to their original state, thus, leading to long‐range ordered two‐dimensional (2D) wavy structures. The film with nanowaves show weaker reflecting color under an ambient light and lower transmittance compared to the straight nanowalls. Using double exposure through a photomask, patterns consisting of both nanowaves and nanowalls for optical display are created.     

A Fast Intra Skip Detection Algorithm for H.264/AVC Video Encoding

A fast intra skip detection algorithm based on the rate‐distortion (RD) cost for an inter frame (P‐slices) is proposed for H.264/AVC video encoding. In the H.264/AVC coding standard, a robust rate‐distortion optimization technique is used to select the best coding mode and reference frame for each macroblock (MB). There are three types of intra predictions according to profiles. These are 16×16 and 4×4 intra predictions for luminance and an 8×8 intra prediction for chroma. For the high profile, an 8×8 intra prediction has been added for luminance. The 4×4 prediction mode has 9 prediction directions with 4 directions for 16×16 and 8×8 luma, and 8×8 chrominance. In addition to the inter mode search procedure, an intra mode search causes a significant increase in the complexity and computational load for an inter frame. To reduce the computational load of the intra mode search at the inter frame, the RD costs of the neighborhood MBs for the current MB are used and we propose an adaptive thresholding scheme for the intra skip extraction. We verified the performance of the proposed scheme through comparative analysis of experimental results using joint model reference software. The overall encoding time was reduced up to 32% for the IPPP sequence type and 35% for the IBBPBBP sequence type.     

Optimal buffered compression and coding mode selection for MPEG-4shape coding

We propose an optimal buffered compression algorithm for shape coding as defined in the forthcoming MPEG-4 international standard. The MPEG-4 shape coding scheme consists of two steps: first, distortion is introduced by down and up scaling; then, context-based arithmetic encoding is applied. Since arithmetic coding is "lossless," the down up scaling step is considered as a virtual quantizer. We first formulate the buffer-constrained adaptive quantization problem for shape coding, and then propose an algorithm for the optimal solution under buffer constraints. Previously, the fact that a conversion ratio (CR) of 1/4 makes a coded image irritating to human observers for QCIF size was reported for MPEG-4 shape coding. Therefore, careful consideration for small size images such as QCIF should be given to prevent coded images from being unacceptable. To this end, a low bit rate tuned algorithm is proposed in this paper as well. Experimental results are given using an MPEG-4 shape codec.