In vivo bone strain patterns in the zygomatic arch of macaques and the significance of these patterns for functional interpretations of craniofacial form

It has been proposed that the mammalian facial skeleton is optimized for countering or dissipating masticatory stress. As optimized load-bearing structures by definition exhibit maximum strength with a minimum amount of material, this hypothesis predicts that during chewing and biting there should be relatively high and near uniform amounts of strain throughout the facial skeleton. If levels of strain in certain areas of the facial skeleton are relatively low during these behaviors, this indicates that the amount of bone mass in these areas could be significantly reduced without resulting in the danger of structural failure due to repeated masticatory loads. Furthermore, and by definition, this indicates that these areas are not optimized for countering masticatory stress, and instead their overall morphology and concentration of bone mass has most likely been selected or influenced mainly by factors unrelated to the dissipation or countering of chewing and biting forces. An analysis of in vivo bone strain along the lateral aspect of the zygomatic arch of macaques indicates the clear absence of a high and near uniform strain environment throughout its extent. Instead, there is a steep strain gradient along the zygomatic arch, with the highest strains along its anterior portion, intermediate strains along its middle portion, and the lowest strains along its posterior portion. These data, in combination with earlier published data (Hylander et al., 1991), indicate that levels of functional strains during chewing and biting are highly variable from one region of the face to the next, and therefore it is unlikely that all facial bones are especially designed so as to minimize bone tissue and maximize strength for countering masticatory loads. Thus, the functional significance of the morphology of certain facial bones need not necessarily bear any important or special relationship to routine and habitual cyclical mechanical loads associated with chewing or biting. Furthermore, the presence of these steep strain gradients within the facial skeleton suggests that the amount of bone mass in the low-strain areas may be largely determined by factors unrelated to processes frequently referred to as "functional adaptation," or conversely, that the "optimal strain environment" of bone varies enormously throughout the facial skeleton (cf., Rubin et al., 1994). Based solely on anatomical considerations, it is likely that the zygomatic arch is bent in both the parasagittal and transverse planes and twisted about its long axis. Due to constraints on rosette position, the strain data are incapable of determining if one or more of these loading conditions predominate. Instead, the strain data simply provide limited support for the possible presence of all of these loading regimes. Finally, as the masseter muscle is concentrated along the anterior portion of the zygomatic arch and as the arch has fixed ends, the largest shearing forces and the largest bending and twisting moments are located along its anterior portion. This in turn explains why the largest strains are found along the anterior portion of the zygomatic arch.     

Nanoplough-constrictions on thin YBCO films made with atomic force microscopy

Utilizing atomic force microscope (AFM) with a diamond tip, we were able to successfully plough nano-constrictions on epitaxially grown YBa2Cu3O(7-x) thin films deposited on MgO substrates. The thickness, width, and length of the obtained constrictions were in the range of a few 100 nm. Furthermore, we managed to produce a new S-type constriction, of which the dimensions are easier to control than for conventional constrictions.     

Organized cell swimming motions in Bacillus subtilis colonies: patterns of short-lived whirls and jets

The swimming motions of cells within Bacillus subtilis colonies, as well as the associated fluid flows, were analyzed from video films produced during colony growth and expansion on wet agar surfaces. Individual cells in very wet dense populations moved at rates between 76 and 116 microm/s. Swimming cells were organized into patterns of whirls, each approximately 1,000 microm2, and jets of about 95 by 12 microm. Whirls and jets were short-lived, lasting only about 0.25 s. Patterns within given areas constantly repeated with a periodicity of approximately 1 s. Whirls of a given direction became disorganized and then re-formed, usually into whirls moving in the opposite direction. Pattern elements were also organized with respect to one another in the colony. Neighboring whirls usually turned in opposite directions. This correlation decreased as a function of distance between whirls. Fluid flows associated with whirls and jets were measured by observing the movement of marker latex spheres added to colonies. The average velocity of markers traveling in whirls was 19 microm/s, whereas those traveling in jets moved at 27 microm/s. The paths followed by markers were aligned with the direction of cell motion, suggesting that cells create flows moving with them into whirls and along jets. When colonies became dry, swimming motions ceased except in regions close to the periphery and in isolated islands where cells traveled in slow whirls at about 4 microm/s. The addition of water resulted in immediate though transient rapid swimming (> 80 microm/s) in characteristic whirl and jet patterns. The rate of swimming decreased to 13 microm/s within 2 min, however, as the water diffused into the agar. Organized swimming patterns were nevertheless preserved throughout this period. These findings show that cell swimming in colonies is highly organized.     

Identification of PLCgamma-dependent and -independent events during fertilization of sea urchin eggs

At fertilization, sea urchin eggs undergo a series of activation events, including a Ca2+ action potential, Ca2+ release from the endoplasmic reticulum, an increase in intracellular pH, sperm pronuclear formation, MAP kinase dephosphorylation, and DNA synthesis. To examine which of these events might be initiated by activation of phospholipase Cgamma (PLCgamma), which produces the second messengers inositol trisphosphate (IP3) and diacylglycerol, we used recombinant SH2 domains of PLCgamma as specific inhibitors. Sea urchin eggs were co-injected with a GST fusion protein composed of the two tandem SH2 domains of bovine PLCgamma and (1) Ca2+ green dextran to monitor intracellular free Ca2+, (2) BCECF dextran to monitor intracellular pH, (3) Oregon Green dUTP to monitor DNA synthesis, or (4) fluorescein 70-kDa dextran to monitor nuclear envelope formation. Microinjection of the tandem SH2 domains of PLCgamma produced a concentration-dependent inhibition of Ca2+ release and also inhibited cortical granule exocytosis, cytoplasmic alkalinization, MAP kinase dephosphorylation, DNA synthesis, and cleavage after fertilization. However, the Ca2+ action potential, sperm entry, and sperm pronuclear formation were not prevented by injection of the PLCgammaSH2 domain protein. Microinjection of a control protein, the tandem SH2 domains of the phosphatase SHP2, had no effect on Ca2+ release, cortical granule exocytosis, DNA synthesis, or cleavage. Specificity of the inhibitory action of the PLCgammaSH2 domains was further indicated by the finding that microinjection of PLCgammaSH2 domains that had been point mutated at a critical arginine did not inhibit Ca release at fertilization. Additionally, Ca2+ release in response to microinjection of IP3, cholera toxin, cADP ribose, or cGMP was not inhibited by the PLCgammaSH2 fusion protein. These results indicate that PLCgamma plays a key role in several fertilization events in sea urchin eggs, including Ca2+ release and DNA synthesis, but that the action potential, sperm entry, and male pronuclear formation can occur in the absence of PLCgamma activation or Ca2+ increase.     

Hydrogen embrittlement of high strength pipeline steels

A comparison was made between three API grade pipeline steels (X60, X80 and the X100 grade) from the point of view of their susceptibility to hydrogen embrittlement. The main aim was to determine whether the development of higher strength materials led to greater susceptibility to hydrogen embrittlement. This was achieved by straining at 2.8 × 10⁻⁵ s⁻¹ after cathodic charging. The results showed that there is a distinct susceptibility to loss of ductility after charging and this tends to increase with the strength level of the steel at a charging current density above 0.44 mA mm⁻². All three steels exhibited fine cracks parallel to the major rolling direction after charging and an increasing amount of brittleness on the fracture surface.     

Hydrogen embrittlement of stainless steel overlay materials for hydrogenators

An investigation was carried out of the effect of hydrogen absorption on the tensile ductility of composite specimens representing stainless steel weld overlays on low alloy steel substrates as used in the fabrication of hydrogenators. Specimens of the two stainless steels (AISI 309 and 347) involved in hydrogen cracking were also fractured in tension at strain rates between 5.9 × 10⁻⁶ and 1.5 × 10⁻³ s⁻¹ after thermal charging with hydrogen. Results indicated that only the 347 samples suffered significant embrittlement by hydrogen and the original ductility could be restored by subsequent annealing for a time and temperature determined by the hydrogen diffusivity.     

Analytical and sampling constraints in ²¹⁰Pb dating

²¹⁰Pb dating provides a valuable, widely used means of establishing recent chronologies for sediments and other accumulating natural deposits. The Constant Rate of Supply (CRS) model is the most versatile and widely used method for establishing ²¹⁰Pb chronologies but, when using this model, care must be taken to account for limitations imposed by sampling and analytical factors. In particular, incompatibility of finite values for empirical data, which are constrained by detection limit and core length, with terms in the age calculation, which represent integrations to infinity, can generate erroneously old ages for deeper sections of cores. The bias in calculated ages increases with poorer limit of detection and the magnitude of the disparity increases with age. The origin and magnitude of this effect are considered below, firstly for an idealised, theoretical ²¹⁰Pb profile and secondly for a freshwater lake sediment core. A brief consideration is presented of the implications of this potential artefact for sampling and analysis.     

Effects of intravenous medium-chain triglycerides on pulmonary gas exchanges in mechanically ventilated patients

OBJECTIVE: In mechanically ventilated patients, pulmonary gas exchange was investigated during the administration of total parenteral nutrition containing medium-chain triglycerides or long-chain triglycerides as fat emulsions. DESIGN: Prospective, randomized, crossover trial (two lipid infusion periods of 8 hrs). SETTING: Intensive care unit in a university hospital. PATIENTS: Six mechanically ventilated patients, using the pressure-support mode. INTERVENTIONS: Total caloric intake was adapted according to measured energy expenditure. Fat emulsion provided 50% of the energy expenditure. Patients were infused with 50% medium-chain/50% long-chain triglycerides or 100% long-chain triglycerides in a random sequence. MEASUREMENTS AND MAIN RESULTS: Oxygen consumption, CO2 production, and minute ventilation were measured by indirect calorimetry. PaO2 and PaCO2 were determined in blood samples. Medium-chain triglycerides increased oxygen consumption by 27.8% and minute ventilation by 14.3% at the end of the protocol. CO2 production, PaO2, and PaCO2 were not different between groups. CONCLUSIONS: Medium-chain triglycerides cause an increase in metabolic demand in mechanically ventilated patients when they are infused over a short period. Postoperative or intensive care unit patients with a low pulmonary reserve should receive infusions of medium-chain triglycerides over a more prolonged period than long-chain triglycerides.