A Fast-Response DC Motor Speed Control System

This paper describes the design, construction, and testing of a thyristorized speed control unit for a separately excited dc motor. The motor is fed from a three-phase six-pulse fully controlled thyristor bridge. A speed loop with a proportional plus integral controller maintains the desired speed irrespective of the load variations on the motor. An inner current control loop protects the thyristors from overcurrents. This loop also provides fast response overcoming the effect of disturbances such as variations in supply voltage. The design aspects of the control loops are discussed, and experimental results are given.     

Molecular Sensing Using Hyperpolarized Xenon NMR Spectroscopy

Molecular imaging is the determination of the spatial location and concentration of specific molecules in a sample of interest. Sophisticated modern magnetic resonance imaging machines can collect NMR spectra from small-volume elements within a sample, enabling local chemical analysis. However, abundant water and fat signals limit detection of metabolites to near mM concentrations. Alternatively, targeted relaxation contrast agents enhance the relaxation of the strong water signal where they bind. A comparison of images with and without a contrast agent shows the target distribution, but high µM concentrations are needed. We have developed an approach that exploits the strong signals of hyperpolarized ¹²⁹Xe (an inert reporter introduced for imaging). The imaging contrast agents are composed of a biological recognition motif to localize the agent (antibodies or aptamers) and covalently tethered cryptophane cages. Xenon binds to the cryptophane and though chemical exchange saturation transfer creates contrast in a xenon image. Imaging agents can deliver many cages per target, giving detection limits in the pM concentration range. The evolution and principles of this approach are described herein.     

A new fluoride mediated synthesis of mesoporous silica and their usefulness in controlled delivery of duloxetine hydrochloride a serotonin re-uptake inhibitor

A new type of mesoporous silica nanoparticle (MSN) was synthesized in fluoride media via sol–gel technique using TritonX 100 and Tween-20. The surface area and pore volume of the MSN particles were modified by varying the concentration of Tween-20. The prepared MSN nanoparticles with large surface area and pore volume (T-2, T-3) were selected to accommodate the model drug duloxetine hydrochloride (DX) for evaluation of their drug-loading and release abilities. Calcined and DX loaded nanoparticles were characterized by Brunauer–Emmett–Teller technique (BET), powder X-ray diffraction (XRD), scanning electron microscopy (SEM), thermogravimetric (TG) analysis and UV-diffuse reflectance (UV-DRS). In vitro release studies proved that the particle displays an initial burst release followed by sustained release for up to 140 h. From the studies it is evident that the synthesized particle may be useful as a carrier for sustained release of active pharmaceutical ingredients (APIs).     

Synthesis of 3D nanostructured metal alloy of immiscible materials induced by megahertz-repetition femtosecond laser pulses

In this work, we have proposed a concept for the generation of three-dimensional (3D) nanostructured metal alloys of immiscible materials induced by megahertz-frequency ultrafast laser pulses. A mixture of two microparticle materials (aluminum and nickel oxide) and nickel oxide microparticles coated onto an aluminum foil have been used in this study. After laser irradiation, three different types of nanostructure composites have been observed: aluminum embedded in nickel nuclei, agglomerated chain of aluminum and nickel nanoparticles, and finally, aluminum nanoparticles grown on nickel microparticles. In comparison with current nanofabrication methods which are used only for one-dimensional nanofabrication, this technique enables us to fabricate 3D nanostructured metal alloys of two or more nanoparticle materials with varied composite concentrations under various predetermined conditions. This technique can lead to promising solutions for the fabrication of 3D nanostructured metal alloys in applications such as fuel-cell energy generation and development of custom-designed, functionally graded biomaterials and biocomposites.     

Transport and solvent sensing characteristics of styrene butadiene rubber nanocomposites containing imidazolium ionic liquid modified carbon nanotubes

Obtaining strong interfacial interaction between filler and polymer matrix is very crucial for the fabrication of polymer nanocomposites with superior performance. Present study is aimed to fabricate high performance styrene butadiene rubber (SBR) nanocomposites with imidazolium type ionic liquid modified multiwalled carbon nanotube (MWCNT). Ionic liquid facilitates the dispersion of MWCNT in rubber matrix and it is obvious from transmission electron microscopy images. Diffusion of toluene through SBR nanocomposite membranes has been investigated as a function of surface modified MWCNT (f-MWCNT) content to analyze the chain dynamics and filler-polymer interactions. O₂ gas barrier effect of nanocomposites with special reference to the filler loading is explored. The substantial improvement in the barrier effect in presence of filler interpreted on the grounds of a theoretical model describing permeability of heterogeneous systems. Finally solvent sensing characteristics of prepared nanocomposites are also analyzed and it is observed that prepared nanocomposites can be used as a flexible solvent sensor.     

Semiconductor nanostructures in an alumina template matrix: micro- versus macro-scale photoelectrochemical behavior

We show herein that the photoelectrochemical behavior of a given semiconductor nanodot (p-CuSCN or n-TiO₂) in an alumina template matrix, is remarkably different than that of its macro-sized counterpart. Three separate examples of this distinct difference in behavior are presented. It is shown how the photoresponse (e.g. photocurrent) may be amplified (from a low level typical of the signal emanating from a ∼10⁻¹¹ cm² region corresponding to a semiconductor nanodot) by using a large number of electrically inter-connected Au nanowires to support the overlying semiconductor nanodots. The anomalous photoresponse of p-CuSCN nanodots in the template matrix was also numerically simulated by a simple parallel equivalent circuit consisting of a semiconductor and a photocapacitor. Possible practical application scenarios are finally presented for these nanostructures.     

Single-Step Synthesis of Chemically Cross-Linked Polysilastyrene and Its Conversion to β-Silicon Carbide

A new method for chemically cross-linking polysilastyrene using divinylbenzene as the cross-linking agent is reported. The procedure involves a single-step synthesis using the alkali-metal sodium to promote the polymerization of dimethyldichlorsilane in the presence of the comonomers phenylmethyldichlorosilane and divinylbenzene. The cross-linked polymer can be readily converted to β-SiC on pyrolysis at 1500°C. The β-SiC obtained by this procedure is nanocrystalline and has a grain-size distribution of 8–20 nm.     

Curing Studies of Ladder-Like Poly(allylsilsesquioxane) and its copolymers by Differential Scanning Calorimetry

Summary Using stepwise coupling polymerization method, three ladder-like poly(allylsilsesquioxane)s have been synthesized. The prepared ladder-like polymers contain (i) allyl, (ii) allyl and methyl and (iii) allyl and phenyl as side chain groups. They were characterized by FTIR, NMR, WAXD, DSC and TGA. Characterization indicated that they had ladder-like structure. All the polymers were cured by 2,2-dibenzoyl peroxide (1% W/W) and the kinetics for the bulk polymerization of these polysilsesquioxanes was followed by dynamic DSC. The Ozawa and Kissinger methods were used to calculate activation energies for curing of these polysilisesquioxanes. Cured samples were characterized by FTIR, DSC and TGA.