Activity-rest schedules in physically demanding work and the variation of responses with age

Workers in physically demanding occupations require work breaks to recover from exertion. In a laboratory setting, we investigated the impact of ergometer cycling for 7 h in two conditions with an identical total break time but with two different activity-rest schedules. We hypothesised that more frequent but shorter breaks lead to less psychophysical strain and its effects than do less frequent but longer breaks, particularly for older workers. Twenty-nine participants representing three different age groups were tested in both conditions. Heart rate, perceived exertion/tension and feelings of fatigue were assessed and used as dependent variables. Results indicate no general activity-rest differences as well as no age-related differences of break effects under the condition of subjectively equal straining load. However, heart rate was found to be lower at some measurement points in the frequent-short-break condition and perceived exertion was lower in the infrequent-long-break condition. PRACTITIONER SUMMARY: Design of activity-rest schedules in physically demanding occupations is a key issue in the prevention of strain and hence of interest to ergonomists. Our study suggests that breaks during physically demanding work have the same effect if they are frequent and short or infrequent and long, regardless of age.     

Fibrous myopathy. A rheumatic complication of drug abuse

A progressive fibrous myopathy may result from chronic intramuscular drug abuse. This complication may mimic other rheumatic disorders and early recognition may prevent disability. The patient described here presented with fixed flexion and extension contracture of hips and knees, respectively, after abusing meperidine and other agents for 3 years. Soft tissues of thighs and buttocks were "wood hard," EMG showed absence of action potentials in affected muscles, and biopsy revealed extensive replacement of muscle with dense, acellular fibrous tissue. Possible mechanisms are discussed.     

Preoperative radiotherapy for adenocarcinoma of the rectosigmoid

Ninety-seven patients with adenocarcinoma of the rectosigmoid have been treated with high dose (5000-6000 rad) preoperative irradiation from 1960 through 1972 at the University of Oregon Health Sciences Center. Fifty-seven were initially clinically resectable and 40 were initially inoperable. Forty of the 57 initially clinically resectable patients had "curative" resections and are at risk for more than 5 years. An increase in 5-year survival (from 38% to 53%) and an absence of pelvic recurrence have occurred in those patients receiving preoperative irradiation and "curative" resection. Four of the 40 initially inoperable patients are alive without tumor. Three of the four survivors had irradiation and surgery; one had irradiation only. An additional four patients had no evidence of tumor at death. Tumor was totally sterilized by irradiation and nine patients and reduced to microfocal extent in an additional three of the 97 patients. Incidence of complications was no greater than has been reported in a surgical series from the same institution.     

Demonstration of logic AND device using a split-gate pentacene field effect transistor

We report on the fabrication and performance of pentacene-based split-gate field effect transistors (FETs) on doped Si/SiO₂ substrates. Several transistors with split gate structures were fabricated and demonstrated AND logic functionality. The transistor’s functionality was controlled by applying either 0 or − 10 V to each of the gate electrodes. When − 10 V was simultaneously applied to both gates, the transistor was conductive (ON), while any other combination of gate voltages rendered the transistor highly resistive (OFF). A significant advantage of this device is that AND logic devices with multiple inputs can be built using a single pentacene channel with multiple gates. The p-type carrier mobility of charge within the pentacene active layer of these transistors was about 10^− 5 cm²/V-s. We attribute the low value of mobility primarily to the sharp contours of the pentacene film between the drain and the source contacts and to defects in the pentacene film. The average charge density was 1.4 × 10¹² holes/cm². Despite low mobility, the devices operated at lower drain-source (V_DS) and gate-source (V_GS) voltages as compared with previously reported pentacene based FETs.     

ARTIFICIAL INTELLIGENCE GOES MOBILE

New mobile computing technologies require new paradigms for infrastructure and interaction with mobile and networked devices. For building smart mobile companions for new intelligent services, a number of challenges have to be addressed. We argue that artificial intelligence is a key to a new generation of mobile systems. In this introduction to AI in mobile systems, we present some of the challenges and solutions in this exciting field of research.     

Use of Eddy Current Conductivity and Hardness Testing to Evaluate Heat Damage in Aluminum Alloys

Aluminum alloys are heat treated to provide optimal material properties for use in a variety of applications. However, when exposed to abnormally high temperatures, an evaluation must be performed to determine if the aluminum component has been compromised. Nondestructive evaluation of aluminum alloys, by means of electrical conductivity and hardness tests, can assist in determining the condition of the part. These techniques require experience and engineering judgment to properly interpret the data produced in order to determine whether a part needs to be replaced. This article will elaborate on issues with these nondestructive techniques to help diagnose the condition of aluminum alloys exposed to high temperatures.     

BioPACE

While developing the specifications for electronically enabled Machine Readable Travel Documents, the ICAO paid significant attention to security aspects related to the digital information stored in this type of electronic document. This has resulted in Passive and Active Authentication, Basic Access Control and Extended Access Control. The goal of Basic Access Control (BAC) is preventing unauthorized access to the chip data stored on eMRTDs. The PACE protocol has been developed as a future-proof method to overcome the limitations of BAC and to replace BAC in the future. In this paper the BioPACE protocol is proposed as a supplement to the PACE protocol. Besides verifying if the document holder is indeed the rightful owner, the BioPACE protocol provides a higher convenience for the bearer of the document.