Early Stages in Chemical Development

Examinations with the electron microscope of very early development stages in chemical development reveal the consecutive steps in silver filament formation. It is shown that the filaments initially do not consist of metallic silver but are rather made of some dissolved or complexed material. As time proceeds the filaments become partially, and finally completely reduced.     

Manufacturing of integrative membrane carriers by novel powder injection molding

Although offering distinctive economic benefits the mass fabrication of carrier devices incorporating membranes as quasi-monolithic devices reveals strong technological challenges. Powder injection molding would be an effective process for this purpose, however, manufacturing parts of considerable wall thickness variations and to meet strong precision demands remains problematic. To evaluate novel ways of process conducts as well as to determine influencing parameters a demonstrator design had been developed which enabled the generation of thin membranes by controlled piston movement. Suitable lay-out of the runner system had been determined with the help of simulation calculations. The combined injection + embossing process conduct enabled to reduce minimum membrane thickness to about a half. Investigation of parameter influence showed that embossing force and gap width before injection have an ameliorative effect on membrane quality whereas the embossing delay time had no significant impact.     

Influence of the nanofiber dimensions on the properties of nanocellulose/poly(vinyl alcohol) aerogels

The investigation of aerogels made from cellulose nanofibers and poly(vinyl alcohol) (PVOH) as a polymeric binder is reported. Aerogels based on different nanocellulose types were studied to investigate the influence of the nanocellulose dimensions and their rigidity on the morphology and mechanical properties of the resulting aerogels. Thus, cellulose nanocrystals (CNCs) with low (10), medium (25), and high (80) aspect ratios, isolated from cotton, banana plants, and tunicates, respectively, microfibrillated cellulose (MFC) and microcrystalline cellulose (MCC) were dispersed in aqueous PVOH solutions and aerogels were prepared by freeze‐drying. In addition to the cellulose type, the PVOH‐ and the CNC‐concentration as well as the freeze‐drying conditions were varied, and the materials were optionally cross‐linked by an annealing step or the use of a chemical cross‐linker. The data reveal that at low PVOH content, rigid, high‐aspect ratio CNCs isolated from tunicates afford aerogels that show the least amount of shrinking upon freeze‐drying and display the best mechanical properties. However, with increasing concentration of PVOH or upon introduction of a chemical cross‐linker the differences between materials made from different nanocellulose types decrease. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41740.     

Interleukin‐4‐Clicked Surfaces Drive M2 Macrophage Polarization

Driving macrophage (M?) polarization into the M2 phenotype provides potential against inflammatory diseases. Interleukin‐4 (IL‐4) promotes polarization into the M2‐M? phenotype, but its systemic use is constrained by dose‐limiting toxicity. Consequently, we developed IL‐4‐decorated surfaces aiming at sustained and localized activity. IL‐4 muteins were generated by genetic code expansion; Lys42 was replaced by unnatural amino acids (uAAs). Both muteins showed cell‐stimulation ability and binding affinity to IL4Rα similar to those of wt‐IL‐4. Copper‐catalyzed (CuAAC) and copper‐free strain‐promoted (SPAAC) 1,3‐dipolar azide–alkyne cycloadditions were used to site‐selectively anchor IL‐4 to agarose surfaces. These surfaces had sustained IL‐4 activity, as demonstrated by TF‐1 cell proliferation and M2, but not M1, polarization of M‐CSF‐generated human M?. The approach provides a blueprint for the engineering of cytokine‐activated surfaces profiled for sustained and spatially controlled activity.     

Site-Directed Immobilization of an Engineered Bone Morphogenetic Protein 2 (BMP2) Variant to Collagen-Based Microspheres Induces Bone Formation In Vivo

For the treatment of large bone defects, the commonly used technique of autologous bone grafting presents several drawbacks and limitations. With the discovery of the bone-inducing capabilities of bone morphogenetic protein 2 (BMP2), several delivery techniques were developed and translated to clinical applications. Implantation of scaffolds containing adsorbed BMP2 showed promising results. However, off-label use of this protein-scaffold combination caused severe complications due to an uncontrolled release of the growth factor, which has to be applied in supraphysiological doses in order to induce bone formation. Here, we propose an alternative strategy that focuses on the covalent immobilization of an engineered BMP2 variant to biocompatible scaffolds. The new BMP2 variant harbors an artificial amino acid with a specific functional group, allowing a site-directed covalent scaffold functionalization. The introduced artificial amino acid does not alter BMP2′s bioactivity in vitro. When applied in vivo, the covalently coupled BMP2 variant induces the formation of bone tissue characterized by a structurally different morphology compared to that induced by the same scaffold containing ab-/adsorbed wild-type BMP2. Our results clearly show that this innovative technique comprises translational potential for the development of novel osteoinductive materials, improving safety for patients and reducing costs.     

Effects of pretreatments on colour alterations of litchi during drying and storage

The objective of this research was to study the effect of osmotic pretreatment with combined anti-browning agents (acid, glycerol and/or trehalose) on the colour characteristics of dried litchi after drying and during 5 months of storage compared to samples without pretreatment. The pretreated samples showed good inhibition of polyphenol oxidase activity when compared with the control, while the total phenolic contents in the dried products were not reduced. The results demonstrated that water activity, lightness difference, chroma, degree of browning (DB), and 5-hydroxymethylfurfural values of all pretreated samples increased, while hue angle decreased with storage time. Samples pretreated with glycerol showed the best potential for browning retardation, followed by glycerol combined with trehalose, and trehalose, respectively. In addition, the colour parameters were used to calculate the luminescence values, representing the data in grey scale, which were correlated with a non-enzymatic browning index. The results showed grey value could be adequately used to represent the DB of dried litchi with r ² value of 0.92.     

Extraction of heavy metals from soils using biodegradable chelating agents

Metal pollution of soils is widespread across the globe, and the clean up of these soils is a difficulttask. One possible remediation technique is ex-situ soil washing using chelating agents. Ethylenediaminetetraacetic acid (EDTA) is a very effective chelating agent for this purpose but has the disadvantage that it is quite persistent in the environment due to its low biodegradability. The aim of our work was to investigate the biodegradable chelating agents [S,S]-ethylenediaminedisuccinic acid (EDDS), iminodisuccinic acid (IDSA), methylglycine diacetic acid (MGDA), and nitrilotriacetic acid (NTA) as potential alternatives and compare them with EDTA for effectiveness. Kinetic experiments showed for all metals and soils that 24 h was the optimum extraction time. Longer times only gave minor additional benefits for heavy metal extraction but an unwanted increase in iron mobilization. For Cu at pH 7, the order of the extraction efficiency for equimolar ratios of chelating agent to metal was EDDS > NTA> IDSA > MGDA > EDTA and for Zn it was NTA > EDDS > EDTA >MGDA > IDSA. The comparatively low efficiency of EDTA resulted from competition between the heavy metals and co-extracted Ca. For Pb the order of extraction was EDTA > NTA >EDDS due to the much stronger complexation of Pb by EDTA compared to EDDS. At higher concentration of complexing agent, less difference between the agents was found and less pH dependence. There was an increase in heavy metal extraction with decreasing pH, but this was offset by an increase in Ca and Fe extraction. In sequential extractions EDDS extracted metals almost exclusively from the exchangeable, mobile, and Mn-oxide fractions. We conclude that the extraction with EDDS at pH 7 showed the best compromise between extraction efficiency for Cu, Zn, and Pb and loss of Ca and Fe from the soil.     

冶炼烟气净化：所有步骤在一台设备内完成

介绍Kimre公司的SXF^TM半错流洗涤器的结构、优点和应用。该洗涤器采用卧式并流气液接触方式,可根据需要分隔成不同操作段,在由交织单丝构成的纤维介质上完成气体的冷却、净化和除沫。与传统立式逆流填料塔相比,该洗涤器的优点为：高度低,泵、阀门、控制器等可在地面安装,容易操作和维修;液气比范围宽;可进行多级操作,包括在一台设备内完成多个化学过程。如用于冶炼烟气净化,所有步骤可在一台设备内完成。列举了化肥厂造粒塔气体净化、磷酸厂气体除氟和硫酸厂干燥塔除沫等应用实例。