Effects of piracetam on the performance of rats in a delayed match-to-position task

The growing use of antibody-based separation methods has paralleled the expansion of immunochemical detection methods in moving beyond the clinical diagnostic field to applications in environmental monitoring. In recent years high-performance immunoaffinity chromatography, which began as a separation technique in biochemical and clinical research, has been adapted for separating and quantifying environmental pollutants. Bioaffinity offers a selective biological basis for separation that can be incorporated into a modular analytical process for more efficient environmental analysis. The use of immunoaffinity chromatography for separation complements the use of immunoassay for detection. A widely used immunochemical detection method for environmental analyses is enzyme immunoassay. The objective of this paper is to review the status of bioaffinity-based analytical procedures for environmental applications and human exposure assessment studies. Environmental methods based on bioaffinity range from mature immunoassays to emerging techniques such as immunosensors and immunoaffinity chromatography procedures for small molecules.     

Spin injection in n-type resonant tunneling diodes

We have studied the polarized resolved photoluminescence of n-type GaAs/AlAs/GaAlAs resonant tunneling diodes under magnetic field parallel to the tunnel current. Under resonant tunneling conditions, we have observed two emission lines attributed to neutral (X) and negatively charged excitons (X⁻). We have observed a voltage-controlled circular polarization degree from the quantum well emission for both lines, with values up to −88% at 15 T at low voltages which are ascribed to an efficient spin injection from the 2D gases formed at the accumulation layers.     

Low temperature fatigue crack propagation in neutron-irradiated type 316 steel and weld metal

The fast cycling fatigue crack propagation characteristics of type 316 steel and weld metal have been investigated at 380°C after irradiation to 1.72?1.92 × 10²⁰ n/cm²($\text{E > 1}$ MeV) and 2.03 × 10²¹ n/cm² ($\text{E > 1}$ MeV)at the same temperature. With mill-annealed type 316 steel, modest decreases in the rates of crack propagation were observed for both dose levels considered, whereas for cold-worked type 316 steel irradiation to 2.03 × 10²¹ n/cm² ($\text{E > 1}$ MeV) caused increases in the rate of crack propagation. For type 316 weld metal, increases in the rate of crack propagation were observed for both dose levels considered.The diverse influences of irradiation upon fatigue crack propagation in these materials are explained by considering a simple continuum mechanics model of crack propagation, together with the results of control tensile experiments made on similarly irradiated materials.     

Fast diffusers in a thermal gradient (solder ball)

The behaviour of Ni in Sn under a thermal gradient driving forces was calculated considering boundary conditions typical of lead-free solder applications. The steady state concentration profiles for a fast diffuser were determined and the consequences for reliability discussed.     

孩子的天然学堂

在澳大利亚,伴随着妇女就业和单亲家庭的增长,多数家庭和儿童都非常依赖于儿童看护服务,比如,社区幼儿园、幼儿中心、临时家     

Developing eco-friendly methods for purification of compounds derived from hydrogenated cardanol

The present work made a comparative study between two purification methods, column chromatography and recrystallization, for compounds derived from cardanol, a by-product of the cashew industry (Anacardium occidentale L.). The compounds were successfully synthesized and characterized, focusing our attention to results obtained in terms of yield, purity, generation of solid waste and amount of solvent used in each purification process. For all the synthesized compounds, the amount of solvent used was greatly reduced in the recrystallization process, with purities above 80%, when compared to chromatographic column, which still demands high amounts of eluent.     

Scheduling DAG's for asynchronous multiprocessor execution

A new approach is given for scheduling a sequential instruction stream for execution “in parallel” on asynchronous multiprocessors. The key idea in our approach is to exploit the fine grained parallelism present in the instruction stream. In this context, schedules are constructed by a careful balancing of execution and communication costs at the level of individual instructions, and their data dependencies. Three methods are used to evaluate our approach. First, several existing methods are extended to the fine grained situation. Our approach is then compared to these methods using both static schedule length analyses, and simulated executions of the scheduled code. In each instance, our method is found to provide significantly shorter schedules. Second, by varying parameters such as the speed of the instruction set, and the speed/parallelism in the interconnection structure, simulation techniques are used to examine the effects of various architectural considerations on the executions of the schedules. These results show that our approach provides significant speedups in a wide-range of situations. Third, schedules produced by our approach are executed on a two-processor Data General shared memory multiprocessor system. These experiments show that there is a strong correlation between our simulation results, and these actual executions, and thereby serve to validate the simulation studies. Together, our results establish that fine grained parallelism can be exploited in a substantial manner when scheduling a sequential instruction stream for execution “in parallel” on asynchronous multiprocessors     

Learning to use new technologies by older adults: Perceived difficulties,experimentation behaviour and usability

This paper examines the factors and theoretical frameworks for the adoption of technology for older adults, and proposes two models of technology acceptance and rejection, one from an ease of learning perspective, and one from a system and user perspective. Both models are supported from reports on two case studies of older adults using handheld touchscreen tablet devices; one in which the participants are supported during tasks primarily related to walking and navigation, and one in which participants are unsupported in communication related tasks. The first study shows the powerful role that facilitating conditions have for learning how to use digital technologies for this user group, whether supporting through step by step guidance, providing a friendly space to use trial and error methods, and/or provision of a manual. The second study shows the pitfalls of a lack of facilitating conditions during initial use, and highlights potential for appropriate design in helping to avoid some user errors during this phase.     

The perceived utility of human and automated aids in a visual detection task

Although increases in the use of automation have occurred across society, research has found that human operators often underutilize (disuse) and overly rely on (misuse) automated aids (R. Parasuraman & V. Riley, 1997). Nearly 275 Cameron University students participated in 1 of 3 experiments performed to examine the effects of perceived utility (M. T. Dzindolet, H. P. Beck, L. G. Pierce, & L. A. Dawe, 2001) on automation use in a visual detection task and to compare reliance on automated aids with reliance on humans. Results revealed a bias for human operators to rely on themselves. Although self-report data indicate a bias toward automated aids over human aids, performance data revealed that participants were more likely to disuse automated aids than to disuse human aids. This discrepancy was accounted for by assuming human operators have a "perfect automation" schema. Actual or potential applications of this research include the design of future automateddecision aids and training procedures for operators relying on such aids.