RANTES-induced T cell activation correlates with CD3 expression

The chemokine RANTES induces a unique biphasic cytoplasmic Ca2+ signal in T cells. The first phase of this signal, similar to that of other chemokines, is G-protein mediated and chemotaxis associated. The second phase of this signal, unique to RANTES and evident at concentrations greater than 100 nM, is tyrosine kinase linked and results in a spectrum of responses similar to those seen with antigenic stimulation of T cells. We show here that certain jurkat T cells responded to RANTES solely through this latter pathway. A direct correlation between the RANTES-induced second phase response and CD3 expression was demonstrated in these cells. Sorting the Jurkat cells into CD3(high) and CD3(low) populations revealed that only the CD3(high) cells were responsive to RANTES. Furthermore, stimulation of these Jurkat cells with anti-CD3 mAb significantly depresses their subsequent response to RANTES. While a RANTES-specific chemokine receptor is expressed at a low level on these Jurkat cells, the RANTES-induced activation is dependent on the presence of the TCR. Thus, stimulation through TCR may partially account for RANTES' unique pattern of signaling in T cells.     

Temperature-regulated expression of the tac/lacl system for overproduction of a fungal xylanase in Escherichia coli

Temperature-regulated expression of recombinant proteins in the tac promoter (Ptac) system was investigated. Expression levels of fungal xylanase and cellulase from N. patriciarum in E. coli strains containing the natural lacI gene under the control of the Ptac markedly increased with increasing cultivation temperature in the absence of a chemical inducer. The specific activities (units per milligram protein of crude enzyme) of the fungal xylanase and cellulase produced from recombinant E. coli strain pop2136 grown at 42 degrees C were about 4.5 times higher than those of the cells grown at 23 degrees C and were even slightly higher when compared with cells grown in the presence of the inducer isopropyl beta-D-thiogalactopyranoside. The xylanase expression level in the temperature-regulated Ptac system was about 35% of total cellular protein. However, this system can not be applied to E. coli strains containing lacIq, which confers over production of the lac repressor, for high-level expression of recombinant proteins. In comparison with the lambda PL system, the Ptac-based xylanase plasmid in E. coli pop2136 gave a considerably higher specific activity of the xylanase than did the best lambda PL-based construct using the same thermal induction procedure. The high-level expression of the xylanase using the temperature-regulated Ptac system was also obtained in 10-litre fermentation studies using a fed-batch process. These results unambiguously demonstrated that the temperature-modulated Ptac system can be used for overproduction of some non-toxic recombinant proteins.     

Cardiac dysrrhthmia in systemic disease

This is an ECG of a 6-year-old girl. She presented to us for management of epilepsy. Magnetic resonance imaging (MRI) of the brain showed multiple lesions consistent with cortical and subcortical tubers. There were also achromic spots on her skin and echocardiography demonstrated a rhabdomyoma near the right ventricular outflow tract. A diagnosis of tuberous sclerosis, an autosomal-dominantly inherited condition, was made. What is abnormal about the ECG?     

Characterization of arylamine N-acetyltransferase in Enterobacter aerogenes

N-acetyltransferase (NAT) activity was determined by incubation of purified Enterobacter aerogenes enzyme with 2-aminofluorene (2-AF) as the substrate, followed by high pressure liquid chromatography assays. The NAT activity from E. aerogenes was 0.58 +/- 0.08 nmol/min/mg protein for 2-AF. The values of apparent K(m) and Vmax were 0.72 +/- 0.14 mM and 2.45 +/- 0.29 nmol/min/mg protein, respectively, for 2-AF. The optimal pH value for the enzyme activity was 7.5 for the 2-AF tested. The optimal temperature for enzyme activity was 37 degrees C for the 2-AF substrate. The molecular weight of NAT from E. aerogenes was 44.9 kD. Among a series of divalent cations and salts, Zn2+, Ca2+, and Fe2+ were demonstrated to be the most potent protease inhibitors, and only ethylenediaminetetraacetic acid significantly protected the NAT. Iodoacetamide, in contrast to other agents, markedly inhibited NAT.     

Thermal analysis of polymer–water interactions and their relation to gas hydrate inhibition

Gas hydrates formed in oil production pipelines are crystalline solids where hydrocarbon gas molecules such as methane, propane, and their mixtures are trapped in a cagelike structure by hydrogen‐bonded water molecules to form undesirable plugs. Methanol and glycol are currently used to prevent these plugs via thermodynamic inhibition. Small amounts of water‐soluble polymers may provide an alternate approach for preventing gas hydrates. In this study, we expand the fundamental understanding of water–polymer systems with differential scanning calorimetry. Nonfreezable bound water was used to quantify polymer–water interactions and relate them to the chemical structure for a series of polymers, including acrylamides, cyclic lactams, and n‐vinyl amides. For good interactions, the water structure needs to be stabilized through hydrophobic interactions. An increased hydrophobicity of the pendant group also appears to favor polymer performance as a gas hydrate inhibitor. Good inhibitors, such as poly(diethyl acrylamide) and poly(N‐vinyl caprolactam), also show higher heat capacities, which indicate higher hydrophobicity, than poor performers such as polyzwitterions, in which hydrophilicity dominated. The phase behavior and thermodynamic properties of dilute polymer solutions were also evaluated through measurements of the heat of demixing and lower critical solution temperature. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2642–2653, 2007     

2,2′-oxo-1,1′-azobenzene: microbial transformation of rye (Secale cereale L.) allelochemical in field soils byAcinetobacter calcoaceticus: III

Acinetobacter calcoaceticus, a gram-negative bacterium isolated from field soil, was found to be responsible for the biotransformation of 2(3H)-benzoxazolinone (BOA) to 2,2-oxo-1,1-azobenzene (AZOB). Experiments were conducted to evaluate the transformation of BOA to AZOB by this microbe in sterile and nonsterile soil. Transformation studies with soils inoculated withA. calcoaceticus indicated that the production of AZOB increased linearly with the concentration of BOA in sterile soil and showed a quadratic trend in nonsterile soils. This also indicated that all soil types studied for the transformation experiments might containA. calcoaceticus capable of the conversion of benzoxazolinones.     

Predictive models for multibiometric systems

Recognizing a subject given a set of biometrics is a fundamental pattern recognition problem. This paper builds novel statistical models for multibiometric systems using geometric and multinomial distributions. These models are generic as they are only based on the similarity scores produced by a recognition system. They predict the bounds on the range of indices within which a test subject is likely to be present in a sorted set of similarity scores. These bounds are then used in the multibiometric recognition system to predict a smaller subset of subjects from the database as probable candidates for a given test subject. Experimental results show that the proposed models enhance the recognition rate beyond the underlying matching algorithms for multiple face views, fingerprints, palm prints, irises and their combinations.     

Ageing studies of pineapple leaf fiber–reinforced polyester composites

This experimental study evaluated the water absorption characteristics of pineapple leaf fiber (PALF)–polyester composites of different fiber content. The degree of water absorption was found to increase with fiber loading. The mechanism of diffusion was analyzed and the effect of fiber loading on the sorption kinetics was studied. The diffusion coefficient was calculated and found to increase with fiber content. Studies were also made to correlate water absorption with the cross‐sectional areas of the specimens. The effects of ageing on the tensile properties and dimensional stability of PALF polyester composites were studied under two different ageing conditions. Ageing studies showed a decrease in tensile strength of the composites. The composite specimens subjected to thermal ageing showed only a slight deterioration in strength. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 503–510, 2004     

Oxidation and Fracture Strength of High-Purity Reaction-Bonded Silicon Nitride

Reaction-bonded Si₃N₄ (RBSN) made from high-purity Si powder is unusually resistant to degradation caused by exposures to air for up to 50 h at temperatures up to 1400°C. The weight gain during oxidation of this SiH₄-originating RBSN is approximately 10 times less than conventional RBSN. Contrary to normally observed strength degradations, room-temperature strengths of this high-purity, oxidized RBSN (avg = 435 MPa, max. = 668 MPa) remained at their unusually high, as-processed levels after 1000° and 1400°C oxidizing exposures. Fracture toughness values were unaffected by oxidation ( K _IC= 2.3 to 2.4 MPa · m^1/2). This superior oxidation resistance results from the high purity and the small diameter pore channels (0.01 to 0.06 μm) achieved in this SiH₄-originating RBSN.     

Studies on urethane–allophanate networks based on hydroxyl‐terminated polybutadiene: Modeling of network parameters and correlation to mechanical properties

Hydroxyl‐terminated polybutadiene (HTPB)‐based allophanate–urethane networks were prepared by reacting HTPB with di‐isocyanates, such as toluene–di‐isocyanate (TDI), isophorone–di‐isocyanate (IPDI), and 4,4′‐di(socyanatocyclohexyl)methane (H₁₂MDI) at stoichiometric ratios (r‐values) ranging from 1.0 to 1.5. The networks were characterized for mechanical and swell properties. The network parameters, such as “X,” which is the fraction of urethane groups involved in the allophanate formation, and effective chain length (L_x) were calculated from experimental crosslink density values determined from swell data, using α‐model equations developed by Marsh. Excellent linear correlations were obtained between mechanical properties and the calculated network parameters. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2986–2994, 2006