Rolling element bearing design through genetic algorithms

The design of rolling element bearings has been a challenging task in the field of mechanical engineering. While most of the real aspects of the design are never disclosed by bearing manufacturers, the common engineer is left with no other alternative than to refer to standard tables and charts containing the bearing performance characteristics. This paper presents a more viable method to solve this problem using genetic algorithms (GAs). Since the algorithm is basically a guided random search, it weakens the chances of getting trapped in local maxima or minima. The method used has yielded improved performance parameters than those catalogued in standard tables.     

Ternary Solvent System to Control the Morphology of Active Blend in Inverted Organic Solar Cells

Bulk heterojunction blend of poly(3-hexylthiophene)–[6,6]-phenyl-C₆₁-butyric acid methyl ester prepared using the ternary solvent mixture was used as the active layer of an inverted organic solar cell. The ternary solvent mixture consisted of a good solvent such as ortho-dichlorobenzene and two marginal solvents such as cyclohexanone and toluene offering limited solubility to the poly(3-hexylthiophene) component. Power conversion efficiency of inverted device was found to decrease from 2.74?±?0.05% in the unmodified device to 2.64?±?0.07% in the modified device. UV–visible measurement revealed less efficient photoabsorption in the mixed cosolvent-casted active layer due to insufficient and disordered crystallization of poly(3-hexylthiophene) domains.     

Production of soya milk containing low flatulence‐causing oligosaccharides in a packed bed reactor using immobilised α‐galactosidase

Peanut α‐galactosidase was immobilised in calcium alginate beads and used to hydrolyse the flatulence‐causing oligosaccharides, raffinose and stachyose, in soya milk in batch and in packed bed reactor with recycle. The immobilised enzyme exhibited a slightly lower activity than the free enzyme. The activity yield of immobilised α‐galactosidase was 75.1% and the immobilisation yield was 82.6%. Batch hydrolysis using immobilised enzyme at 55 °C resulted in 96% reduction in the oligosaccharides after 12 h. For the continuous process, a packed bed reactor with recycle was used. More than 98% of the oligosaccharides were hydrolysed after 6 h of reaction at 55 °C. The immobilised enzyme also proved to be stable up to three repeated hydrolysis reactions.     

Frequency-reconfigurable antennas for multiradio wireless platforms

Looking to increase the functionality of current wireless platforms and to improve their quality of service, we have explored the merits of using frequency-reconfigurable antennas as an alternative for multiband antennas. Our study included an analysis of various reconfigurable and multiband structures such as patches, wires, and combinations. Switches, such as radio-frequency microelectromechanical systems (RFMEMS) and p-i-n diodes, were also studied and directly incorporated onto antenna structures to successfully form frequency-reconfigurable antennas.     

Study and Analysis of the Effect of Harmonics on the Hot Spot Temperature of a Distribution Transformer Using Finite-Volume Method

Transformers are critical components in power systems and their failure can cause long interruption of power supply. The condition of a transformer can be monitored by performing thermal analysis. The use of non-linear devices, such as rectifiers and converters, draws harmonic currents that increase losses in transformers, thereby increasing their operating temperature. In this article, a new numerical approach is presented for determining the rise in hot spot temperature in a 5-kVA, 400/400-V dry-type three-phase transformer laboratory prototype. The key novelty is that the additional winding eddy current loss due to non-linear loads is considered in the numerical modeling. The winding eddy current loss corresponding to harmonic distortion is estimated by conducting experiments and calculations. Numerical simulations are carried out for a wide range of non-linear loads using a commercial computational fluid dynamics package, FLUENT 6.3. The proposed numerical methodology is validated by performing experiments on the transformer for possible non-linear loads and comparing the measured hot spot temperature with the simulated values. Correlation equations for rise in hot spot temperature as a function of total harmonic distortion are presented, which can be used for estimating the life of transformers when connected to different types of loads.     

Material properties and operating configurations of membrane reactors for propane dehydrogenation

A modeling‐based approach is presented to understand physically realistic and technologically interesting material properties and operating configurations of packed‐bed membrane reactors (PBMRs) for propane dehydrogenation (PDH). PBMRs composed of microporous or mesoporous membranes combined with a PDH catalyst are considered. The influence of reaction and membrane transport parameters, as well as operating parameters such as sweep flow and catalyst placement, are investigated to determine desired “operating windows” for isothermal and nonisothermal operation. Higher Damköhler (Da) and lower Péclet (Pe) numbers are generally helpful, but are much more beneficial with highly H₂‐selective membranes rather than higher‐flux, lower‐selectivity membranes. H₂‐selective membranes show a plateau region of conversion that can be overcome by a large sweep flow or countercurrent operation. The latter shows a complex trade‐off between kinetics and permeation, and is effective only in a limited window. H₂‐selective PBMRs will greatly benefit from the fabrication of thin (～1 µm or less) membranes. © 2014 American Institute of Chemical Engineers AIChE J, 61: 922–935, 2015     

Pollution due to coir retting and its effect on estuarine flora and fauna

One of the striking features of Kerala state is the continuous chain of lagoons or backwaters existing along the coastal region. The backwaters support rich and diverse life forms and provide crucial nurseries for shrimps and fishes as well as habitat for oysters, clams and mussels which later enrich the ocean and make Kerala the principal exporter of marine products amongst the states of India. The shallow fringes of the backwaters and the channels drawn from them are used for retting of coconut husk. It adversely affects the productivity of the backwaters and is harmful to marine fisheries. The retting of coconut husks in backwaters is brought about by the pectinolytic activity of micro organisms especially bacteria fungi and yeasts degrading the fibre binding materials of the husk and liberating large quantities of organic matter and chemicals into the environment, including pectin, pentosan, tannins, polyphenols, etc. Consequently hydrogen sulphide, phosphate and nitrate contents increase while dissolved oxygen and community diversity of plankton decrease in the ambient waters during the retting process. The present study is to evaluate pollution due to coir retting activity and its influence on quality of water and estuarine flora and fauna.     

Magnetic Properties of Mn‐doped SnO2 Thin Films Prepared by the Sol–Gel Dip Coating Method for Dilute Magnetic Semiconductors

Manganese‐doped tin oxide (SnO₂:Mn) thin films were deposited on glass substrates by the sol–gel dip coating technique. The effect on structural, morphological, magnetic, electrical, and optical properties in the films with different Mn concentrations (0–5 mol%) were investigated. X‐ray diffraction patterns (XRD) showed the deterioration of crystallinity with increase in Mn‐doping concentration. Scanning electron microscopy (SEM) studies showed an inhibition of grain growth with an increase in Mn concentration. X ray photoelectron spectroscopy (XPS) revealed the presence of Sn⁴⁺ and Mn³⁺ in SnO₂: Mn films. SnO₂: Mn films show ferromagnetic and paramagnetic behavior. These SnO₂:Mn films acquire n‐type conductivity for 0–3 mol% (SnO₂ ‐ Sn_0.97Mn_0.03O_{2) ‐}doping concentration and p type for 5 mol% Mn‐doping concentration(Sn_0.95Mn_0.05O₂) in SnO₂ films. An average transmittance of > 75% (in UV‐Vis region) was observed for all the SnO₂:Mn films. Optical band gap energy of SnO₂: Mn films were found to vary in the range 3.55 to 3.71 eV with the increase in Mn‐doping concentration. Photoluminescence (PL) spectra of the films exhibited an increase in the emission intensity with increase in Mn‐doping concentration which may be due to structural defects or luminescent centers, such as nanocrystals and defects in the SnO₂. Such SnO₂:Mn films with structural, magnetic and optical properties can be used as dilute magnetic semiconductors.     

Cassava starch‐graft‐polymethacrylamide copolymers as flocculants and textile sizing agents

Cassava starch‐graft‐polymethacrylamide (PMAM) copolymers were synthesized by a free‐radical‐initiated polymerization reaction, and the products were tested for their efficiency as flocculants and textile sizing agents. The highest percentages of grafting and monomer conversion were 79.9 and 78.0%, respectively. The grafted starches were characterized by Fourier transform infrared spectroscopy, X‐ray diffraction analysis, scanning electron microscopy, differential scanning calorimetry, and thermogravimetric analysis. The average molecular weight of PMAM chains in the grafted starches ranged from 15.9 to 30.8 × 10⁵ g/mol. The grafted starches exhibited a higher peak viscosity and paste stability in comparison to the native starch (NS). Dynamic mechanical analysis showed that grafting provided fairly shear‐stable hydrogels, and the highest storage modulus obtained was 17,900 Pa compared to 1879 Pa for NS. The flocculation studies demonstrated the superiority of starch‐g‐PMAM over cassava starch and PMAM as an efficient flocculant. The tensile strength of cotton yarns sized with the starch‐grafted copolymer was significantly higher (104 MPa) compared to that sized with NS (34 MPa). © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39810.