Ternary Solvent System to Control the Morphology of Active Blend in Inverted Organic Solar Cells

Bulk heterojunction blend of poly(3-hexylthiophene)–[6,6]-phenyl-C₆₁-butyric acid methyl ester prepared using the ternary solvent mixture was used as the active layer of an inverted organic solar cell. The ternary solvent mixture consisted of a good solvent such as ortho-dichlorobenzene and two marginal solvents such as cyclohexanone and toluene offering limited solubility to the poly(3-hexylthiophene) component. Power conversion efficiency of inverted device was found to decrease from 2.74?±?0.05% in the unmodified device to 2.64?±?0.07% in the modified device. UV–visible measurement revealed less efficient photoabsorption in the mixed cosolvent-casted active layer due to insufficient and disordered crystallization of poly(3-hexylthiophene) domains.     

Pilocarpine‐loaded poly(DL‐lactic‐co‐glycolic acid) nanoparticles as potential candidates for controlled drug delivery with enhanced ocular pharmacological response

The poor corneal residence time of pilocarpine, an alkaloid extracted from the leaves of the Jaborandi plant, limits its ocular application. The aim of this study was to develop, characterize, and evaluate the potential of pilocarpine entrapped by poly(DL ‐lactic‐co‐glycolic acid) (PLGA) nanoparticle carriers for ocular drug delivery. Pilocarpine‐loaded nanoparticles were prepared with a double‐emulsion (water in oil in water) method and characterized with transmission electron microscopy and X‐ray diffraction analysis. The nanoparticles exhibited an average size of 82.7 nm with an encapsulation efficiency of 57%. Stability studies showed the absence of agglomeration and constancy in the amount of drug entrapped; this indicated the solidity of these particles for long‐term use. The in vitro release studies conducted in simulated tear fluid showed the sustained release of pilocarpine. In vivo evaluation of the nanoparticles was done in a rabbit model with a miosis assay and compared to an equal dose of commercially available eye drops of pilocarpine (Pilocar drops). The in vivo miosis studies showed that the duration of miotic response increased by 40% for the nanoparticles and produced an almost 68% increase in total miotic response when compared to the eye drops. In conclusion, this study clearly demonstrated the potential of pilocarpine‐loaded PLGA nanoparticles for multiplying the therapeutic effect of ophthalmic drug delivery with enhanced bioavailability and pharmacological response. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Magnetic Properties of Mn‐doped SnO2 Thin Films Prepared by the Sol–Gel Dip Coating Method for Dilute Magnetic Semiconductors

Manganese‐doped tin oxide (SnO₂:Mn) thin films were deposited on glass substrates by the sol–gel dip coating technique. The effect on structural, morphological, magnetic, electrical, and optical properties in the films with different Mn concentrations (0–5 mol%) were investigated. X‐ray diffraction patterns (XRD) showed the deterioration of crystallinity with increase in Mn‐doping concentration. Scanning electron microscopy (SEM) studies showed an inhibition of grain growth with an increase in Mn concentration. X ray photoelectron spectroscopy (XPS) revealed the presence of Sn⁴⁺ and Mn³⁺ in SnO₂: Mn films. SnO₂: Mn films show ferromagnetic and paramagnetic behavior. These SnO₂:Mn films acquire n‐type conductivity for 0–3 mol% (SnO₂ ‐ Sn_0.97Mn_0.03O_{2) ‐}doping concentration and p type for 5 mol% Mn‐doping concentration(Sn_0.95Mn_0.05O₂) in SnO₂ films. An average transmittance of > 75% (in UV‐Vis region) was observed for all the SnO₂:Mn films. Optical band gap energy of SnO₂: Mn films were found to vary in the range 3.55 to 3.71 eV with the increase in Mn‐doping concentration. Photoluminescence (PL) spectra of the films exhibited an increase in the emission intensity with increase in Mn‐doping concentration which may be due to structural defects or luminescent centers, such as nanocrystals and defects in the SnO₂. Such SnO₂:Mn films with structural, magnetic and optical properties can be used as dilute magnetic semiconductors.     

Material properties and operating configurations of membrane reactors for propane dehydrogenation

A modeling‐based approach is presented to understand physically realistic and technologically interesting material properties and operating configurations of packed‐bed membrane reactors (PBMRs) for propane dehydrogenation (PDH). PBMRs composed of microporous or mesoporous membranes combined with a PDH catalyst are considered. The influence of reaction and membrane transport parameters, as well as operating parameters such as sweep flow and catalyst placement, are investigated to determine desired “operating windows” for isothermal and nonisothermal operation. Higher Damköhler (Da) and lower Péclet (Pe) numbers are generally helpful, but are much more beneficial with highly H₂‐selective membranes rather than higher‐flux, lower‐selectivity membranes. H₂‐selective membranes show a plateau region of conversion that can be overcome by a large sweep flow or countercurrent operation. The latter shows a complex trade‐off between kinetics and permeation, and is effective only in a limited window. H₂‐selective PBMRs will greatly benefit from the fabrication of thin (～1 µm or less) membranes. © 2014 American Institute of Chemical Engineers AIChE J, 61: 922–935, 2015     

Studies on urethane–allophanate networks based on hydroxyl‐terminated polybutadiene: Modeling of network parameters and correlation to mechanical properties

Hydroxyl‐terminated polybutadiene (HTPB)‐based allophanate–urethane networks were prepared by reacting HTPB with di‐isocyanates, such as toluene–di‐isocyanate (TDI), isophorone–di‐isocyanate (IPDI), and 4,4′‐di(socyanatocyclohexyl)methane (H₁₂MDI) at stoichiometric ratios (r‐values) ranging from 1.0 to 1.5. The networks were characterized for mechanical and swell properties. The network parameters, such as “X,” which is the fraction of urethane groups involved in the allophanate formation, and effective chain length (L_x) were calculated from experimental crosslink density values determined from swell data, using α‐model equations developed by Marsh. Excellent linear correlations were obtained between mechanical properties and the calculated network parameters. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2986–2994, 2006     

Synthesis and characterization of hindered‐phenol‐containing amine moieties as antioxidants for polypropylene copolymers

(4‐Ethylphenyl)‐3,5‐ditertiarybutyl‐4‐hydroxybenzylamine, 1‐phenyl‐4‐(3,5‐ditertiarybutyl‐4‐hydroxybenzyl)piperazine, and 1‐(3,5‐ditertiarybutyl‐4‐hydroxybenzyl)piperidine were synthesized and characterized, and their performance in polypropylene copolymer (PPCP) was tested by multiple extrusions in a Brabender plasticorder. The thermooxidative stability of PPCP was assessed by the measurement of oxidative induction time at 200 ± 1°C, and the thermal stability was assessed by observation of the change in the melt flow rate. A comparative study of the synthesized antioxidants with the commercially available antioxidant 2,6‐ditertiarybutyl‐4‐methylphenol was made. The presence of phenolic and amino groups influenced the performance of the antioxidants. The performance of the antioxidants influenced the thermal stability of the PPCP. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1097–1103, 2004     

Trivalent chromium removal from tannery effluent using kaolin‐supported bacterial biofilm of Bacillus sp isolated from chromium polluted soil

BACKGROUND: Bacterial strains belonging to the genus Bacillus, isolated from Cr‐ polluted soil (tannery sludge) were employed as consortium for Cr(III) removal from tannery effluents. Kaolin clay, a natural adsorbent, was used as supporting material for bacterial biofilm formation. The use of clay‐supported bacterial biofilm has not previously been employed for the treatment of tannery effluents containing Cr(III) salt. RESULTS: Commercial tannery effluent containing 1000 ppm initial metal ion concentration was treated in stages. The initial Cr(III) concentration of 1000 ppm was brought down to 2 ppm, a permissible level for discharge, after the fourth stage. The bacterial isolates were found to be Bacillus subtilis VITSCCr01 and Bacillus cereus VITSCCr02 by 16s rRNA gene sequencing. Batch assay and confocal laser scanning microscopy results revealed the role of kaolin as a support material in biofilm formation. Best fit was obtained with the Freundlich adsorption isotherm. The mechanism of sorption was confirmed by Fourier transform infrared (FT‐IR) spectroscopy and scanning electron microscopy–energy dispersive X‐ray spectroscopy (SEM‐EDS). CONCLUSION: Cr(III) removal from tannery effluent using low cost adsorbents such as kaolin and bacteria proved to be effective for metal concentrations ?1000 ppm; this is normally not possible using conventional treatment methods. This work has demonstrated feasible sorption of Cr(III), especially during post‐tanning operations. Copyright © 2011 Society of Chemical Industry     

Development and Validation of HPTLC Method for Estimation of Tacrolimus in Formulations

A new, simple, and rapid high-performance thin-layer chromatographic method with a derivatization procedure was developed and validated for quantitative determination of tacrolimus. Tacrolimus was chromatographed on silica gel 60 F₂₅₄ TLC plate using toluene–acetonitrile–glacial acetic acid (6:4:0.1, by volume) as mobile phase. Tacrolimus was visualized using a derivatization reagent containing anisaldehyde–sulfuric acid in absolute alcohol and quantified by densitometric analysis in the reflectance mode at 675 nm. The method was found to give compact spots for the drug (R_f?=?0.40?±?0.03). The linear regression analysis data for the calibration plots showed good linear relationship with r²?=?.9989 in the concentration range 100–800 ng/spot. The method was validated for precision, recovery, repeatability, and robustness as per the International Conference on Harmonization guidelines. The minimum detectable amount was found to be 28.90 ng, whereas the limit of quantitation was found to be 97.04 ng. Statistical analysis of the data showed that the method is precise, accurate, reproducible, and selective for the analysis of tacrolimus. The method was successfully employed for the estimation of equilibrium solubility and quantification of tacrolimus as a bulk drug and in commercially available capsules and in-house developed self-microemulsifying formulations.     

Triphasic ceramic coated hydroxyapatite as a niche for goat stem cell-derived osteoblasts for bone regeneration and repair

Current treatment strategies for the repair or replacement of bone use synthetic implants with stem cells and their progeny––a new approach to address unmet medical needs. This study has evaluated the effect of a silica-coated bioactive ceramic, namely HASi in comparison to hydroxyapatite (HA) on the adhesion, proliferation and osteogenic differentiation of goat bone marrow-derived mesenchymal stem cells in vitro in a prolonged culture of 28 days. The cellular activities were significantly enhanced on HASi signifying the role of silica to stimulate osteoblast cells. The fabrication of such a ‘cell-ceramic construct using autologous MSCs’ is aimed for the transplantation to a large bone defect site in the goat femur model which still remains a formidable challenge in Orthopedic surgery.