Influence of thermal conditions on the combustion synthesis of Si2N2O phase

This work is a contribution to the study of Si₂N₂O synthesis via Self-Propagating High-temperature Synthesis (SHS).The elaboration of Si₂N₂O was carried out using two kinds of experimental equipments and differences both in reaction temperatures and in products compositions were evidenced.In order to determine the reaction mechanisms, several compositions and thermal conditions of the reactant mixture were studied.Considering our results, two kinds of reaction mechanisms for the combustion synthesis of Si₂N₂O could be suggested. Furthermore, the results previously reported in the literature have been explained in the light of this work.The SHS samples were characterized by X-ray diffraction and scanning electron microscopy (SEM) analysis. Their quantitative compositions were determined by Rietveld refinement.     

Effect of nitrogen to niobium atomic ratio on superconducting transition temperature of δ-NbN<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> powders

Powders of cubic niobium nitride δ-NbN _x with a particle size of below 20 μm were prepared by reactive diffusion at T = 1455?1475°C under nitrogen pressures of P ₁(N₂) = 0.1?3 MPa and P ₂(N₂) = 25 MPa. For these powders, the values of the stoichiometric coefficient x, lattice parameter a, and the superconducting transition temperature Tc were measured and the a(x), T _c(x) and T _c(a) functions were analyzed. The T _c values were found to linearly grow with increasing a (decreasing structure imperfection). A maximum value of T _c (15.8 K) corresponded to a maximum value of a (4.3934 Å). Maximain the a(x) and T _c(x) curves were found to correspond to a slightly substoichiometric nitride with x = 0.98. Having synthesized cubic niobium nitrides with 0.892 < x < 1.062, we managed to measure the dependences of a and T _c on x all over the almost entire homogeneity range for δ-NbN _x . Our a(x) and T _c(a) functions were found to reasonably agree with those previously reported for SHS-produced δ-NbN _x powders.     

Linkage of proximal myotonic myopathy to chromosome 3q

We performed genetic linkage analysis in nine German proximal myotonic myopathy (PROMM) families using DNA-markers D3S1541 and D3S1589 from the region of the recently discovered gene locus of myotonic dystrophy type 2 (DM2) on chromosome 3q. Two-point analysis supplied an lod score of 5.9. We conclude that a gene causing PROMM is located on chromosome 3q. PROMM and DM2 may be allelic disorders or may be caused by closely linked genes.     

Molecular and phenotypic characterization of genotypic Candida albicans subgroups and comparison with Candida dubliniensis and Candida stellatoidea

There have been increased reports of the isolation of unusual genotypic groups of Candida albicans (groups C and D) based on a well-defined genotypic method; this method uses cellular DNA digested with the EcoRI enzyme and the restriction fragment length polymorphisms (RFLPs) generated by agarose gel electrophoresis. The aim of the present study was to use additional molecular tools to characterize these unusual strains and to compare them with authentic strains of C. dubliniensis, a recently delineated species, and type I C. stellatoidea. The RFLPs of PCR products generated from the intergenic transcribed spacer (ITS) region did not differentiate among C. albicans genotypes A, B, and C and type I C. stellatoidea. However, this method did differentiate the C. albicans genotype D strains, which were identical to C. dubliniensis. The RFLPs generated by HaeIII digestion of the PCR products of the V3 region of the 25S rRNA gene (rDNA) could differentiate the same groups as RFLP analysis of the PCR amplicon of the ITS region. C. albicans genotype B isolates have been shown to have a transposable intron in the 25S rDNA, whereas genotype A isolates do not; C. dubliniensis strains also have an intron that is larger than that in genotype B C. albicans strains but that is in the same location. PCR designed to span this region resulted in a single product for C. albicans genotype A (450 bp), B (840 bp), type 1 C. stellatoidea (840 bp), and C. dubliniensis (1,080 bp), whereas the C. albicans genotype C isolates had two major products (450 and 840 bp). All C. albicans genotype D isolates gave a PCR product identical to that given by C. dubliniensis. These results indicate that those strains previously designated C. albicans genotype D are in fact C. dubliniensis, that no differences were found between type 1 C. stellatoidea and C. albicans genotype B strains, and that the C. albicans genotype C strains appear to have the transposable intron incompletely inserted throughout the ribosomal repeats in their genomes. The results of the antifungal susceptibility testing of 105 of these strains showed that, for fluconazole, strains of C. dubliniensis were significantly more susceptible than strains of each of the C. albicans genotypes (genotypes A, B, and C). The flucytosine susceptibility results indicated that strains of C. albicans genotype A were significantly less susceptible than either C. albicans genotype B or C. albicans genotype C strains. These results indicate that there is a correlation between the Candida groups and antifungal susceptibility.     

High-frequency welding of plastics in a working condenser with a non-uniform distribution of the electrical field

A method for calculating the conditions of high-frequency (HF) welding of plastics in a working condenser with the non-uniform distribution of the electric field is described. The method determines the instantaneous specific power of the internal heat sources on the basis of capacitance and voltage in the working condenser which is not completely filled with the welded material. An example of calculating the temperature distribution in the thermoplastic material in the process of HF welding of components in equipment with a working condenser of the ‘thin edge against isolated plane’ type is outlined.     

Transfer ratio of Langmuir-Blodgett films as an indicator of the single-crystal silicon surface modified by polyionic layers

Multilayer nanoscale Langmuir-Blodgett films based on diphilic β-cyclodextrins with various numbers of alkyl chains were grown on single-crystal silicon substrates both unmodified and modified by cationic and anionic polyelectrolyte layers using the polyion complex technique. Ratios of β-cyclodextrin monolayer transfer on substrates were calculated and analyzed. It was shown that this ratio depends on the sign of the polyelectrolyte adhesive layer charge, as well as on the number of alkyl chains in the β-cyclodextrin molecule and the number of deposited monolayers. The observed phenomena characterizing indicator properties of β-cyclodextrin monolayers were interpreted.