Tunable temperature‐ and shear‐responsive hydrogels based on poly(alkyl glycidyl ether)s

We describe the synthesis, characterization and direct‐write 3D printing of triblock copolymer hydrogels that have a tunable response to temperature and shear stress. In aqueous solutions, these polymers utilize the temperature‐dependent self‐association of poly(alkyl glycidyl ether) ‘A’ blocks and a central poly(ethylene oxide) segment to create a physically crosslinked three‐dimensional network. The temperature response of these hydrogels was dependent upon composition, chain length and concentration of the ‘A’ block in the copolymer. Rheological experiments confirmed the existence of sol–gel transitions and the shear‐thinning behavior of the hydrogels. The temperature‐ and shear‐responsive properties enabled direct‐write 3D printing of complex objects with high fidelity. Hydrogel cytocompatibility was also confirmed by incorporating HeLa cells into select hydrogels resulting in high viabilities over 24 h. The tunable temperature response and innate shear‐thinning properties of these hydrogels, coupled with encouraging cell viability results, present an attractive opportunity for additive manufacturing and tissue engineering applications. © 2018 Society of Chemical Industry     

Use of Ozone to Prepare Silver Oxides

The possible use of ozone to produce higher oxides was analyzed thermodynamically. Because the activity of oxygen in ozone is ∼10¹⁸ at room temperature and ∼10⁸ at 773 K, ozone may react with metals to yield higher-oxidation-state products than does an ambient pressure of pure oxygen. In agreement with this thermodynamic prediction, silver oxides (AgO and Ag₂O) were synthesized experimentally by blowing a gas mixture of 6 vol% ozone and oxygen through a water-cooled lance. Neither Ag₃O₄ nor Ag₂O₃ was detected. Slow oxygen diffusion into a metal and/or reaction products and decomposition of unstable oxides that are formed successively are obstacles to practical applications of syntheses via ozone oxidation.     

Fracture mechanism characterization of cross-ply carbon-fiber composites using acoustic emission analysis

The sequence of microscopic fracture mechanisms in locally loaded cross-ply carbon-fiber composites was studied by analyzing acoustic emission (AE) signals in combination with the modal analysis of Lamb waves, using microscopic and ultrasonic examination of the specimen after load interruption. The first 70 AE events were analyzed, which were detected during the initial loading segment when the first sudden load drop and gradual load recovery were observed. Characteristics of the detected waves were compared with the S₀- and A₀-mode Lamb waves produced by a spot- or line-focused YAG laser. The internal damage progression of the composite specimen was determined to be the fiber fracture in the front lamina, transverse cracks in the mid-lamina, delamination and splitting.     

1.5 nm direct-tunneling gate oxide Si MOSFET's

In this paper, normal operation of a MOSFET with an ultra-thin direct-tunneling gate oxide is reported for the first time. These high current drive n-MOSFET's were fabricated with a 1.5 nm direct-tunneling gate oxide. They operate well at gate lengths of around 0.1 μm, because the gate leakage current falls in proportional to the gate length, while the drain current increases in inverse proportion. A current drive of more than 1.0 mA/μm and a transconductance of more than 1,000 mS/mm were obtained at a gate length of 0.09 μm at room temperature. These are the highest values ever obtained with Si MOSFET's at room temperature. Further, hot-carrier reliability is shown to improve as the thickness of the gate oxide is reduced, even in the 1.5 nm case. This work clarifies that excellent performance-a transconductance of over 1,000 mS/mm at room temperature-can be obtained with Si MOSFET's if a high-capacitance gate insulator is used     

Cranial Base Synchondrosis Lacks PTHrP-Expressing Column-Forming Chondrocytes

The cranial base contains a special type of growth plate termed the synchondrosis, which functions as the growth center of the skull. The synchondrosis is composed of bidirectional opposite-facing layers of resting, proliferating, and hypertrophic chondrocytes, and lacks the secondary ossification center. In long bones, the resting zone of the epiphyseal growth plate houses a population of parathyroid hormone-related protein (PTHrP)-expressing chondrocytes that contribute to the formation of columnar chondrocytes. Whether PTHrP⁺ chondrocytes in the synchondrosis possess similar functions remains undefined. Using Pthrp-mCherry knock-in mice, we found that PTHrP⁺ chondrocytes predominantly occupied the lateral wedge-shaped area of the synchondrosis, unlike those in the femoral growth plate that reside in the resting zone within the epiphysis. In vivo cell-lineage analyses using a tamoxifen-inducible Pthrp-creER line revealed that PTHrP⁺ chondrocytes failed to establish columnar chondrocytes in the synchondrosis. Therefore, PTHrP⁺ chondrocytes in the synchondrosis do not possess column-forming capabilities, unlike those in the resting zone of the long bone growth plate. These findings support the importance of the secondary ossification center within the long bone epiphysis in establishing the stem cell niche for PTHrP⁺ chondrocytes, the absence of which may explain the lack of column-forming capabilities of PTHrP⁺ chondrocytes in the cranial base synchondrosis.     

Ultrafine particles of the ZrO2-SiO2 system prepared by the spray-ICP technique

Ultrafine powders of the ZrO₂-SiO₂ system prepared by spraying aqueous mixed solutions of ZrO(NO₃)₂·2H₂O and silicone oil into an ultrahigh temperature inductively coupled plasma (the spray-ICP technique) have been investigated in connection with particle growth and phase change caused by heat treatment. The prepared powders were composed of roundish ultrafine particles 10 to 20 nm in size, and their components were tetragonal ZrO₂ (t-ZrO₂) and amorphous SiO₂ (a-SiO₂).a-SiO₂ alone did not crystallize below 1400° C, though the particles grew above 900° C.t-ZrO₂ converted to monoclinic ZrO₂ (m-ZrO₂) above 400° C, also followed by particle growth. On the other hand composite powders oft-ZrO₂ anda-SiO₂ exhibited no particle growth below 1200° C. Above 1200° Ct-ZrO₂ converted tom-ZrO₂, and its amount decreased with an increase in SiO₂ content. At 1400° C particle growth occurred, and the round particles of ZrO₂ were dispersed in ana-SiO₂ glass medium. These results indicate that ZrO₂ and SiO₂ mutually block particle growth, and that SiO₂ contributes to the quenching oft-ZrO₂ by keeping the particles of ZrO₂ within the critical particle size oft-ZrO₂.     

Preparation of SrBi 2 Ta 2 O 9 Thin Films by Liquid-Delivery MOCVD Without Additional Solvents

SrBi 2 Ta 2 O 9 thin films were prepared by ECR plasma enhanced metalorganic chemical vapor deposition (ECR-MOCVD) with a liquid-delivery system using one cocktail source without an additional solvent. The strontium-tantalum double alkoxide, Sr{Ta[OC 2 H 4 H(CH 3 ) 2 ](OC 2 H 5 ) 5 } 2 , was dissolved in stabilized trimethyl bismuth, Bi(CH 3 ) 3 / dioxane. This source system has been used in a conventional bubbling system. Deposition rate and the composition of the films were strictly controlled by the concentration and the composition of the cocktail source. Therefore, high reproducibility was realized by using this system. The constituent phase of the stoichiometric SBT film as-deposited at 500 C on a (111)Pt/TiO 2 /SiO 2 /Si substrate was a fluorite phase and transformed to the single phase of SBT by the post annealing at 800 C. It showed almost the same ferroelectricity as the stoichiometric composition film.     

Cold storage characteristics of mobile HTS magnet

A cold storage system specialized in mobile high-temperature superconducting (HTS) magnets (e.g. for magnetically levitated (maglev) vehicles) has been proposed. In this system, a cooling source is detachable and a HTS coil is capable of maintaining superconducting state with its heat capacity. This system allows a considerably lightweight HTS magnet.An apparatus was constructed to evaluate the possibility of using cold storage systems in maglev vehicles. The thermal characteristic of this apparatus was based on a magnet for previous maglev test vehicles [1]. The operational temperature range of the magnet was assumed from 20 K to 50 K. Some experiments indicated that heat conduction by residual gas was not negligible. Especially over 30 K, gas conduction took a large part of heat input. This phenomenon is attributable to reduction of cryopumping effect. However, activated carbon in the apparatus compensates cryopumping effect. A unique heat capacitor was also used to enhance the cold storage effect. Water ice was chosen as a heat capacitor because water ice has a higher heat capacity than metallic materials at cryogenic temperatures. A small amount of water ice also prolonged cryogenic temperature condition. These results indicate 1 day of cold storage is probable in a magnet for maglev vehicles.