黏滞阻尼器的优化布置及其在高层钢结构加固中的应用

阻尼器优化布置是结构减震设计过程中的重要环节,通常需要通过多次动力响应计算来完成。为此,提出了一种通过结构静力分析确定阻尼器合理布置位置的方法,并能够快速计算出优化方案的附加阻尼比。将该方法应用于一栋位于日本东京都新宿区29层钢结构建筑的减震加固设计中,分析了该建筑的强震观测系统在日本“311地震”中采集到的部分楼层加速度时程数据,并基于分析结果验证了所建立的非线性数值分析模型的可靠性。采用所提方法对结构进行减震加固,得到双向共64个阻尼器的优化布置方案及其附加阻尼比,并通过动力方法对结果进行了验证。同时针对长周期及长持时特性的地震波,对减震结构进行动力弹塑性时程分析,评估其抗震性能。分析结果表明：减震优化方案的减震效果明显,结构整体地震反应和构件损伤较非减震方案都大大减小;减震优化方案有效改善了高层钢结构楼层变形不均匀的情况,层间位移角均满足小于1/100的性能要求;通过减震优化后大部分钢支撑和钢梁的塑性率都降低至小于1。     

Study of performance characteristics of a small Stirling refrigerator

A prototype Stirling cycle refrigerator employing helium as a working fluid was investigated to determine whether a freon‐free machine was a viable alternative for the current household refrigerator. A displacer‐type or β‐type Stirling cycle machine of 100‐W capacity was designed and tested using varying design parameters such as dead volume ratio, working fluids, the ratio of the compression volume to the expansion volume, and the phase difference between a power piston and displacer. The detrimental effect of the dead space on the refrigeration capacity was confirmed. The refrigeration produced by nitrogen in an expansion space was 28% less than that produced by helium. The optimum volume ratio and the phase difference for maximum refrigeration was determined under the design operation conditions. Moreover, the refrigeration correlation formula as a function of these parameters was obtained. © 2002 Wiley Periodicals, Inc. Heat Trans Asian Res, 31(5): 344–361, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.10033     

Evaluation of the possibility that free fatty acids cause false-positive result in diarrhetic shellfish poisoning mouse bioassay in actual use

Midgut glands of bivalves are used for the mouse bioassay of diarrhetic shellfish poison (DSP). A large quantity of free fatty acids (FFAs) causes a false positive outcome in the assay. To examine whether this is likely to occus under conditions of actual use, we analyzed the contents of the FFAs in the enlarged midgut glands during gametogenesis of Japanese scallops Patinopecten yessoensis that had been caught at two points in Hunka Bay on March 27, 2006, because the content of FFAs may increase with activation of lipogenesis for gametogenesis. Fatty acids (FAs) were measured with fluorometric high-performance liquid chromatography after derivatization with 9-anthryldiazomethane. The total FFAs (14 : 0, 16 : 0, 18 : 0, 16 : 1, 18 : 1, 18 : 4, 20 : 5 and 22 : 6) represented 3.3-4.2 wt% of the lipid. The toxic FFAs accounted for 40-43 wt% of the total FFAs. Content of each FFA (18 : 1, 2.7-5.0 mg/g lipid; 18 : 4, tr.-2.0 mg/g; 20 : 4, n.d.; 20 : 5, 8.0-9.1 mg/g and 22 : 6, 2.0-2.1 mg/g) was lower than the lethal dose tentatively calculated from the relative toxicity. It appears that the likelihood of FFAs causing false-positives in the mouse bioassay is low if the sample is fresh and is extracted immediately after homogenizing.     

Laboratory and field measurements of dry deposition of sulfur dioxide onto Chinese loess surfaces

Laboratory and field measurements were conducted to examine dry deposition of SO2 onto Chinese loess surfaces using native soil sampled in the loess plateau, China. The field tests were employed in Beijing and Lanzhou, China, by directly measuring the dry deposition of SO2 on soil, which uses soil put on a collector as an SO2 passive sampling medium. In the laboratory, a high rate of uptake to SO2 deposition for Chinese soil surfaces due to the highly alkalinity was found. The uptake of SO2 deposition was dependent on the pH soil and relative humidity. Furthermore, we evaluated some factors that affect the measurement precision: response of SO2 uptake, repeatability, recovery factor, and variability associated with the weight and the surface coverage on the collectors. As a result, it was shown that the measurement precision was primarily related to the ratio of the SO2 deposition amount relative to the sulfur content of the original soil. This result was consistent with the field observations. The laboratory and field results indicated an excellent agreement on the SO2 uptake inherent in the results from the soil surfaces in different regions.     

The generalized boundary element approach to Burgers' equation

The generalized boundary element method is presented for the numerical solution of Burgers' equation. The new method is based on the set of boundary integral equations derived for each subdomain by using the fundamental solution for the linearized differential operator of the equation. The resulting system of quasi-non-linear equations is solved implicitly with use of a simple iterative procedure. The adaptability and the accuracy of the proposed method are demonstrated by three examples and a comparison of the numerical results with the exact solution or other existing solutions is shown for the first example.     

A simple method for recovering the motile spermatozoa from extremely low quality sperm samples

Recovery of motile spermatozoa from extremely low quality samples for use in the intracytoplasmic sperm injection (ICSI) procedure is difficult. To solve this problem we developed a simple method to recover the motile spermatozoa using a 3% polyvinylpyrrolidone (PVP) droplet. After depositing a sperm pellet into this slightly viscous droplet, motile spermatozoa readily swam out to the clear area while immotile spermatozoa dispersed to a lesser extent, so that motile and immotile cells became clearly separated from each other. A total of 36 ICSI cycles using spermatozoa with extremely low quality characteristics were performed. We recovered the motile spermatozoa from all sperm samples from two sources of poor quality spermatozoa. Thirty-one cycles of ICSI with ejaculate resulted in fertilization and pregnancy rates of 54 and 29% respectively. Five cycles of ICSI with frozen-thawed epididymal spermatozoa resulted in fertilization and pregnancy rates of 70 and 60% respectively. The 3% PVP droplet method is very simple and easy to perform, so it may be useful for recovering the motile spermatozoa from extremely low quality sperm samples used for ICSI.     

Effect of GaAs surface pretreatment on electrical properties of MBE-ZnSe/GaAs substrate interfaces

Interface properties of MBE-grown ZnSe/GaAs substrate systems formed on variously pretreated GaAs surfaces, which include standard chemically etched (5H₂SO₄:1H₂O₂: 1H₂O), (NH₄)₂S_x-, NH₄I-, and HF-pretreated surfaces, are investigated by capacitance-voltage (C-V) and deep level transient spectroscopy (DLTS) measurements. A HF-pretreated and annealed ZnSe/p-GaAs sample showed marked reduction of interface state density, N_ss, with N_ss,_min below 4 x 10¹¹cm^-2 eV^-1 near E_c- E_FS= 1.0 eV. The value is about one order of magnitude smaller than that of the standard chemically etched interface, and comparable to (NH₄)₂S_x- pretreated interface. Nevertheless, C-V characteristics of ZnSe/nGaAs samples, which were measured for the first time, indicate that interface Fermi level, E_FS, is not completely unpinned due to the interface states located above the midgap. A consistent result was obtained by DLTS method in determining E_FS position. The influence of N_ss distribution on vertical current conduction is also analyzed. It is found that U-shaped interface states with N_ss(E) > 1 x 10¹³ cm^-2 eV^-1 above the midgap may cause an excess voltage drop larger than a few volts at the interface.     

Ti-Containing Silsesquioxane Gels with Tunable Porosity: Preparation and Catalytic Activity for the Epoxidation of Cyclooctene by Aqueous Hydrogen Peroxide

Novel Ti-containing silsesquioxane gel catalysts were prepared by the hydrosilylative condensation of Ti-containing silsesquioxanes together with cubic silsesquioxanes and spherosilicates. The porosity of gels was controlled by changing the composition and the mixing order of the starting materials. Both porous and nonporous gels were found to act as excellent heterogeneous catalysts towards the selective epoxidation of cyclooctene by the use of aqueous hydrogen peroxide as an oxidant.