Metalloendopeptidase ADAM-like Decysin 1 (ADAMDEC1) in Colonic Subepithelial PDGFRα+ Cells Is a New Marker for Inflammatory Bowel Disease

Metalloendopeptidase ADAM-Like Decysin 1 (ADAMDEC1) is an anti-inflammatory peptidase that is almost exclusively expressed in the gastrointestinal (GI) tract. We have recently found abundant and selective expression of Adamdec1 in colonic mucosal PDGFRα⁺ cells. However, the cellular origin for this gene expression is controversial as it is also known to be expressed in intestinal macrophages. We found that Adamdec1 mRNAs were selectively expressed in colonic mucosal subepithelial PDGFRα⁺ cells. ADAMDEC1 protein was mainly released from PDGFRα⁺ cells and accumulated in the mucosal layer lamina propria space near the epithelial basement membrane. PDGFRα⁺ cells significantly overexpressed Adamdec1 mRNAs and protein in DSS-induced colitis mice. Adamdec1 was predominantly expressed in CD45⁻ PDGFRα⁺ cells in DSS-induced colitis mice, with only minimal expression in CD45⁺ CD64⁺ macrophages. Additionally, overexpression of both ADAMDEC1 mRNA and protein was consistently observed in PDGFRα⁺ cells, but not in CD64⁺ macrophages found in human colonic mucosal tissue affected by Crohn’s disease. In summary, PDGFRα⁺ cells selectively express ADAMDEC1, which is localized to the colon mucosa layer. ADAMDEC1 expression significantly increases in DSS-induced colitis affected mice and Crohn’s disease affected human tissue, suggesting that this gene can serve as a diagnostic and/or therapeutic target for intestinal inflammation and Crohn’s disease.     

Analysis of Triacylglycerols and Free Fatty Acids in Algae Using Ultra-Performance Liquid Chromatography Mass Spectrometry

To assess the suitability of microalgal strains for biodiesel production the lipid content and composition, especially individual triacylglycerols (TAG) and free fatty acids (FFA) must be determined. In this study, the compositions and concentrations of TAG and FFA were analysed in four halophytic algal species, Dunaliella salina, D. tertiolecta, D. bardawil, and D. granulata. These species were selected as part of a larger screen to identify species suitable for biofuel feedstocks. An accelerated solvent extraction instrument was used for lipids and fatty acid extraction using a dichloromethane–hexane solvent system. Ultra-performance liquid chromatography coupled with mass spectrometry (MS) detection was optimized and applied to the quantitative analysis of TAG and FFA in the different algal extracts. Individual TAG were characterized structurally using direct electrospray ionization (ESI) MS and MS/MS techniques. Cationic adducts (NH₄ ⁺) of TAG were detected and quantified in the positive ESI MS and MS/MS modes, while the negative ESI mode was used for FFA analysis. Over 20 TAG were identified and quantified in the four Dunaliella strains. Analysis of FFA compositions demonstrated that the most abundant FFA in these four algal species were palmitic, linolenic, linoleic, and oleic acids.     

Comparison of N-Heterocyclic Aromatics Dibenzo[c,g]Carbazole and Dibenz[a,j]Acridine : Metabolism,DNA Binding and Mutation

N-Heterocyclic aromatics, such as carbazole and acridine derivatives, are environmental carcinogenic pollutants. Examples of these compounds are 7H-dibenzo[c,g]carbazole (DBC) and dibenz[a,j]acridine (DBA). The ionization potential (IP) for DBC is lower than for DBA. DBC is metabolized in lung and liver by way of phenols or directly through radical cations. DBC-induced liver and lung tumors have mutations in the 61^st codon of ras. DBA is metabolized in skin by way of a diol-epoxide of DBA. DBA-induced skin tumors have mutations in 12^th, 13^th and 61^st codons of ras. In summary, the metabolic activation of DBC proceeds through different adduction pattern pathways than does DBA and leads to different ras mutational spectra.     

Influence of metallic substrate surface engineering on peel resistance of adhesively bonded polymer film

The peel resistance of adhesively bonded polymer films to a stainless steel sheet substrate (SSSS) with different engineered surface characteristics was examined in two different loading directions and for two different peel speeds. The SSSS was laminated with two thin polymeric adherends using two different pressure-sensitive adhesives. The SSSS surface was altered by grinding and knurling techniques before lamination and the effects of surface alterations on peel resistance were compared with peel resistance of the adherend from as-received SSSS with a bright annealed surface condition. For ground surface, an increase in adherend peel resistance was observed and the increase was attributed to increase in contact area between the adhesive and SSSS surface. For knurled surfaces which involved deeper and less frequent grooves, however, a decrease in peel resistance was observed. This was attributed to a more complex stress state at the peel front in the SSSS groove region during peeling. An increase in peel speed enhanced the peel resistance from both ground and knurled surfaces.     

Transparent, flexible, conductive carbon nanotube coatings for electrostatic charge mitigation

Low color, space environmentally durable polymeric films with sufficient electrical conductivity to mitigate electrostatic charge (ESC) build-up are needed for applications on advanced spacecraft, particularly on large, ultra-light weight space structures. For these applications, the films must exhibit electrical conductivity that can survive the folding and unfolding required for packaging and deployment. The work described herein consists of coating the surface of polymer films with a thin layer of single-walled carbon nanotubes (SWNTs). Surface resistivities in the range sufficient for ESC mitigation were achieved with minimal effects on the optical and thermo-optical properties of the films. Bending, folding or crumpling did not affect the surface resistivity of the coated films. The preparation and characterization of SWNT coated space durable polymer films are discussed.     

Addressing amorphization and transgranular fracture of B4C through Si doping and TiB2 microparticle reinforcing

Over the last two decades, many studies have contributed to improving our understanding of the brittle failure mechanisms of boron carbide and provided a road map for inhibiting the underlying mechanisms and improving the mechanical response of boron carbide. This paper provides a review of the design and processing approaches utilized to address the amorphization and transgranular fracture of boron carbide, which are mainly based on what we have found through 9 years of work in the field of boron carbides as armor ceramics.     

Use of Self-assembled Monolayers at Variable Coverage to Control Interface Bonding in a Model Study of Interfacial Fracture: Pure Shear Loading

The relationships between fundamental interfacial interactions, energy dissipation mechanisms, and fracture stress or fracture energy in a glassy thermoset/inorganic solid joint are not well understood. This subject is addressed with a model system involving an epoxy adhesive on a polished silicon wafer containing its native oxide. The proportions of physical and chemical interactions at the interface, and the in-plane distribution, are varied using self-assembling monolayers of octadecyltrichlorosilane (ODTS). The epoxy interacts strongly with the bare silicon oxide surface, but interacts only weakly with the methylated tails of the ODTS monolayer. The fracture stress is examined as a function of ODTS coverage in the napkin-ring (nominally pure shear) loading geometry. The relationship between fracture stress and ODTS coverage is catastrophic, with a large change in fracture stress occurring over a narrow range of ODTS coverage. This transition in fracture stress does not correspond to a wetting transition of the epoxy. Rather, the transition in fracture stress corresponds to the onset of large-scale plastic deformation within the epoxy. We postulate that the transition in fracture stress occurs when the local stress that the interface can support becomes comparable to the yield stress of the epoxy. The fracture results are independent of whether the ODTS deposition occurs by island growth (T_dep = 10°C) or by homogeneous growth (T_dep = 24°C).     

Efficient Total Chemical Synthesis of 13C=18O Isotopomers of Human Insulin for Isotope‐Edited FTIR

Isotope‐edited two‐dimensional Fourier transform infrared spectroscopy (2 D FTIR) can potentially provide a unique probe of protein structure and dynamics. However, general methods for the site‐specific incorporation of stable ¹³C=¹⁸O labels into the polypeptide backbone of the protein molecule have not yet been established. Here we describe, as a prototype for the incorporation of specific arrays of isotope labels, the total chemical synthesis—via a key ester insulin intermediate—of 97 % enriched [(1‐¹³C=¹⁸O)Phe^B24] human insulin: stable‐isotope labeled at a single backbone amide carbonyl. The amino acid sequence as well as the positions of the disulfide bonds and the correctly folded structure were unambiguously confirmed by the X‐ray crystal structure of the synthetic protein molecule. In vitro assays of the isotope labeled [(1‐¹³C=¹⁸O)Phe^B24] human insulin showed that it had full insulin receptor binding activity. Linear and 2 D IR spectra revealed a distinct red‐shifted amide I carbonyl band peak at 1595 cm^?1 resulting from the (1‐¹³C=¹⁸O)Phe^B24 backbone label. This work illustrates the utility of chemical synthesis to enable the application of advanced physical methods for the elucidation of the molecular basis of protein function.