Increased plasma levels of substance P and disturbed water excretion in patients with liver cirrhosis

We describe a surgical technique for replacing the hip joint capsule using synthetic mesh after oncological resections of the proximal femur that resulted in gross intraoperative instability of the prosthetic reconstruction. The results of its use in 13 patients, 6 of whom also had pelvic resections, are described. These patients were selected from a total group of 88 patients undergoing proximal femoral replacement, 75 of whom did not require capsular replacement (none of these 75 patients have experienced dislocation). In the group requiring capsular reconstruction, 1 of 4 patients with bipolar hemiarthroplasty and 4 of 9 patients with total hip replacements experienced dislocation after operation. Of the dislocated total hip replacements, 1 remains chronically dislocated, and 3 were successfully stabilized by open reduction with further capsular augmentation. Given that the resections involved removal of most of the soft tissues stabilizing the hip joint, we believe that the technique of capsular reconstruction is useful in this difficult group of patients.     

Liquid-Solid mass transfer in a slurry bubble column and a gas-liquid-solid three-phase fluidized bed

Mass transfer coefficients between particles and liquids in a slurry bubble column and a three-phase fluidized bed containing small size particles were obtained with two mass transfer systems: (1) K⁺ –Na⁺ ion-exchange in cation-exchange resin bead beds, including anion-exchange resin beads as inert particles; (2) zinc dissolution by HCl in zinc-plated glass bead beds, and in beds of non-plated glass beads. Operating parameters were gas velocity, liquid velocity, particle diameter, and particle concentration. The dependence of mass transfer coefficients on these parameters is discussed from the viewpoint of the energy supplied into the systems. Correlations of the experimental data using dimensionless groups are compared to previous correlations.     

A case of surgical resection for metachronous multiple liver metastases of chromophobe cell renal carcinoma

A 64-year-old female was hospitalized because of multiple liver metastasis, during the postoperative observation of chromophobe cell renal carcinoma. Injection of Epirubicin/Lipodol into the right hepatic artery followed by transcatheter arterial embolization was performed two times, and the metastatic foci responded favorably to this therapy. Since no new metastatic tumors were observed in the liver nor any other organs, a partial hepatectomy was thus performed. The liver tumor was pathologically diagnosed to be metastasis of the chromophobe cell renal carcinoma. The postoperative course has been uneventful and at present, 6 months after the operation, no further tumors have been observed.     

A 0.65-ns, 72-kb ECL-CMOS RAM macro for a 1-Mb SRAM

An ultrahigh-speed 72-kb ECL-CMOS RAM macro for a 1-Mb SRAM with 0.65-ns address-access time, 0.80-ns write-pulse width, and 30.24-μm ² memory cells has been developed using 0.3-μm BiCMOS technology. Two key techniques for achieving ultrahigh speed are an ECL decoder/driver circuit with a BiCMOS inverter and a write-pulse generator with a replica memory cell. These circuit techniques can reduce access time and write-pulse width of the 72-kb RAM macro to 71% and 58% of those of RAM macros with conventional circuits. In order to reduce crosstalk noise for CMOS memory-cell arrays driven at extremely high speeds, a twisted bit-line structure with a normally on MOS equalizer is proposed. These techniques are especially useful for realizing ultrahigh-speed, high-density SRAM's, which have been used as cache and control storages in mainframe computers     

Prediction of mill load in hot strip mill rolling

It has been ascertained whether or not the model capable of predicting the stress-strain relation of plain carbon steels, previously proposed, is applicable to the estimation of mill loads in the finishing process (consisting of six mill stands) of a hot strip mill. An appreciably good agreement with the predicted and measured mill load values has been obtained in the earlier passes where the strip microstructure is regarded to have completed static recrystallization, and the predicted mill loads in the later passes have been far less than the measured load owing to the effect of the strain accumulated in the previous rolling process. Then, a simple model to predict the accumulated strain has been constructed and introduced into the calculation of mill loads. As a result, the predicted mill loads have been fairly improved over the whole passes in the finishing process.     

Melting and glass transition of radiation-induced graft polyethylene

Melting and glass transition data are reported employing DSC for styrene-grafted high-density polyethylene obtained by γ radiation. Judging from the data of the melting point and the heat of fusion, the grafted polystyrene had no effect on the polyethylene crystallites, but the half-width of the thermogram was observed to increase slightly, showing an effect on the crystallite size distribution. As no effect was observed on the glass transition temperature by grafting, the amorphous region of the polyethylene apparently was not affected. It is suggested, therefore, that the free volume or segmental mobility will not be decreased by radiation-induced grafting. Very few but long grafted chains had negligible effect on the average polyethylene chain length available for segmental motion, and grafted polystyrene should be expected to differ little from the styrene homopolymer in thermal motions.     

Measurement of linewidth and FM-noise spectrum of 1.52 ?m InGaAsP lasers

The linewidth of 1.52 ?m InGaAsP lasers was measured as a function of the output power. The result shows that the linewidth is about 15 MHz when the output power is 1 mW. The FM-noise spectrum was also measured in the frequency range from 10 Hz to 100 MHz. The measured spectrum consists of the 1/f-noise and white-noise components. The linewidth calculated from the FM-noise spectrum is in good agreement with the measured value.