Mechanical properties of molybdenum neutron-irradiated at a high temperature

Molybdenum specimens prepared by two processes, powder-metallurgy (PM) and electron-beam melting (EB), were irradiated to a fast neutron fluence of 2.74 × 10²⁴n/m² (E_n? 1 MeV) at about 600°C (873 K), and their mechanical properties were studied in detail. It was shown that the degree of irradiation embrittlement in EB-Mo was smaller than that in PM-Mo, which might be caused by stronger grain-boundaries and probably smaller irradiation-hardening in the former. From the relation between the recovery of ductility and microstructural changes in post-irradiation annealed PM-Mo at 800 (1073 K), 1000 (1273 K) and 1200°C (1473 K), it was concluded that the recovery resulted from a decrease of irradiation hardening due to a rearrangement and a disappearance of depleted-zones, dislocation-loops and voids in order with increasing annealing temperature. An anomalous mode of fracture was observed in as-irradiated specimens, which consisted of inhomogeneous deformation, then brittle fracture not at the center but at the root of the deformation neck. This mode was observed in a narrow temperature range near the DBTT. A possible mechanism is discussed.     

On the role of anxiety in decisions under possiblistic uncertainty.

We focus on situations in which we must decide on what time to take an action. The action is not in question it is the time of action. We call these "time for action decisions," a prototypical example being deciding when to leave on a journey. We point out that during this type of decision process, the decision-maker recognizes two groups of forces acting on him: one that pushes him to act now and other that pushes him act later. We note that the strength of these forces depends on the information available about various uncertainties associated with the situation. It also strongly depends upon the personality of the decision-maker. We observe that as time passes these conflicting forces tend to build up an anxiety in the decision-maker resulting in an action being taken at a time of most intense anxiety. In this paper using the ideas of possibility and necessity measures to enable different interpretations of uncertain information we investigate the temporal profile of the decision-maker's anxiety as a function of their decision attitude. We investigate the role of maximization of anxiety as decision paradigm. One of our goals here is to try to understand role of the nature and the quality information plays in these types of decisions as well as its interaction with anxiety.     

Effect of insulin fragments on biological activity of insulin and desoctapeptide insulin. I. Potentiation of biological activities

Four derivatives of the insuln B-chain COOH-terminal pentapeptide Arg-Gly-Phe-Phe-Tyr (B22-26) were synthesized and shown to be inactive alone. In the presence of submaximal concentrations of insulin or desoctapeptide insulin, peptides at concentrations of 10(-4) M and higher, markedly stimulated the actions of insulin on rat adipocytes including labeled glucose oxidation, activation of glycogen synthase, and stimulation of 2-deoxyglucose transport. The B-chain COOH-terminal heptapeptide, Gly-Phe-Phe-Tyr-Thr-Pro-Lys (B23-29) was inactive alone or in the presence of submaximal concentrations of insulin or desoctapeptide insulin, suggesting that argnine is required. Dose response curves of insulin, and desoctapeptide insulin for labeled glucose oxidation by rat adipocytes were shifted 1 log concentration unit to the left in the presence of peptide. Peptide shortened the lag time of labeled glucose oxidation and markedly enhanced the rate of 14CO2 production following the lag time. Peptides also enhanced insulin-like activities of concanavalin A and nonsuppressible insulin-like activity P.     

Automatic color-temperature compensator with guest-host liquid-crystal filter for video image sensing

A color-temperature compensating system with an electrically controllable liquid-crystal filter and a color sensor mounted on a video camera has been developed for color image sensing. The filter contains two guest-host liquid-crystal devices with dichroic dyes that have strong light absorption for shorter-wavelength light; two devices are necessary because of the spectral difference between the sun and an incandescent lamp as light sources. The filter's absorption is continuously controlled by the voltage applied to the filter. Because the filter is driven according to spectral information about the illumination detected by the color sensor, the color balance of the video image to be sensed can be compensated automatically and rapidly. This is especially useful for video image shooting in which a video camera experiences changes in illumination color temperatures.     

Cermet-type hydrogen separation membrane obtained from fine particles of high temperature proton-conductive oxide and palladium

A mixed ionic and electronic conducting hydrogen separation membrane, which consisted of proton-conductive oxide and metallic palladium, was fabricated. A porous alumina tube was employed as a support, and proton-conductive oxide particles were introduced into a microporous top layer of the support by an impregnation method. Palladium particles were deposited into the same porous layer by chemical vapor deposition. Hydrogen permeated preferentially via the membrane thus obtained with a hydrogen permeance (PH₂) of 1.2 × 10^− 9 mol·m^− 2·s^− 1·Pa^− 1 at 873 K. Selectivity for hydrogen (PH₂/PN₂) increased with the operating temperature due to an increase in proton conductivity of the membrane, and PH₂/PN₂ = 5.7 was attained at 873 K.     

SrCaO Protective Layer for High-Efficiency PDPs

The sustain pulse voltage of the panel for 66-kPa Ne + Xe (5%-30%) is 20%-40% lower with a Sr_0.62Ca_0.38O protective layer than with a MgO protective layer. At a normal sustain voltage of 160-200 V, the luminous efficiency of the panel with the Sr_0.62 Ca_0.38O protective layer for Xe (30%) is about twice as high as with the MgO protective layer for Xe (10%). The luminances of these panels are almost the same. This high efficiency at normal sustain pulse voltage and normal luminance is obtained through the combined use of the Sr_0.62Ca_0.38O protective layer and high Xe content. With regard to ion bombardment, the Sr_0.62Ca_0.38O film has a 4.5 times longer life than SrO film and nearly 80% of the life of MgO film. We also calculated the values of theoretical secondary electron emission yield gamma_imin of MgO, SrO, and CaO without energy bands in the band gap for rare gas ions and found that [ gamma_imin of MgO] les [gamma_imin of CaO] < [gamma_imin of SrO] except for the one case with He. The breakdown voltage decreases with higher gamma_imin values. As expected, the discharge voltage of the panel is much lower with the SrO protective layer than with the MgO protective layer. The discharge voltages of the panels with Sr_0.62Ca_0.38O and SrO protective layers are almost the same. These findings show that the life of the SrO protective layer can be made 4.5 times longer without any increase in the discharge voltage by adding CaO (40 at.%)     

The Fusion Science Research Plan for the Major U.S. Tokamaks

This is the May 1996 report of a subpanel of the US Department of Energy Fusion Energy Sciences Advisory Committee (FESAC), charged with conducting a review of the progress, priorities and potential near-term contributions of TFTR, DIII-D and Alcator C-MOD (and other facilities as appropriate) as part of the transition to a Fusion Energy Sciences Program and produce an optimum plan for obtaining the most scientific benefit from them.     

Remarkable enhancement in durability of Pd/H-ZSM-5 zeolite catalysts for CH4-SCR

Effect of second components on the catalytic performance of Pd/H-ZSM-5 zeolite (Pd: 0.4 wt.%) was evaluated by a durability test of NO reduction with CH₄ at a relatively high temperature of 500°C in the presence of water vapor for a prolonged period. The Pd/H-ZSM-5 showed high stable activity for this reaction without H₂O in the reactant feed, while immediate and irreversible deactivation was observed in the presence of H₂O, resulting in no activity after 7 h. The second components such as Co, Rh, Ag, Ce, and Fe introduced individually to the Pd/H-ZSM-5 enhanced the durability, and in particular the addition of 3.3 wt.% Co led to a stable NO conversion for more than 40 h in the presence of H₂O.