Lateral Magnetically Modulated Multilayers by Combining Ion Implantation and Lithography

The combination of lithography and ion implantation is demonstrated to be a suitable method to prepare lateral multilayers. A laterally, compositionally, and magnetically modulated microscale pattern consisting of alternating Co (1.6 µm wide) and Co‐CoO (2.4 µm wide) lines has been obtained by oxygen ion implantation into a lithographically masked Au‐sandwiched Co thin film. Magnetoresistance along the lines (i.e., current and applied magnetic field are parallel to the lines) reveals an effective positive giant magnetoresistance (GMR) behavior at room temperature. Conversely, anisotropic magnetoresistance and GMR contributions are distinguished at low temperature (i.e., 10 K) since the O‐implanted areas become exchange coupled. This planar GMR is principally ascribed to the spatial modulation of coercivity in a spring‐magnet‐type configuration, which results in 180° Néel extrinsic domain walls at the Co/Co‐CoO interfaces. The versatility, in terms of pattern size, morphology, and composition adjustment, of this method offers a unique route to fabricate planar systems for, among others, spintronic research and applications.     

Aliasing errors due to quadratic nonlinearities on triangular spectral /hp element discretisations

In this paper, consideration is given to how aliasing errors, introduced when evaluating nonlinear products, inexactly affect the solution of Galerkin spectral/hp element polynomial discretisations on triangles. A theoretical discussion is presented of how aliasing errors are introduced by a collocation projection onto a set of quadrature points insufficient for exact integration, and consider interpolation projections to geometrically symmetric ollocation points. The discussion is corroborated by numerica examples that elucidate the key features. The study is first motivated with a review of aliasing errors introduced in one-dimensional spectral-element methods (these results extend naturally to tensor-product quadrilaterals and hexahedra.) Within triangular domains two commonly used expansions are a hierarchical, or modal, expansion based on a rotationally non-symmetric collapsed-coordinate system, and a Lagrange expansion based on a set of rotationally symmetric nodal points. Whilst both expansions span the same polynomial space, the construction of the two bases numerically motivates a different set of collocation points for use in the collocation projection of a nonlinear product. The purpose of this paper is to compare these two collocation projections. The analysis and results show that aliasing errors produced using a collocation projection on the rotationally non-symmetric, collapsed-coordinate system are significantly smaller than those for a collocation projection using the rotationally symmetric nodal points. In the case of the collapsed coordinate projection, if the Gaussian quadrature order employed is less than half the polynomial order of the integrand, then it is possible for the aliasing error to modify the constant mode of the expansion and therefore affect the conservation property of the approximation. However, the use of a collocation projection onto a polynomial expansion associated with a set of rotationally symmetric nodal points within the triangle is always observed to be non-conservative. Nevertheless, the rotationally symmetric collocation will maintain the overall symmetry of the triangular region, which is not typically the case when a collapsed coordinate quadrature projection is used.     

Microchip HPLC of peptides and proteins

Rapid microchip reversed-phase HPLC of peptides and proteins at pressure gradients of 12 bar/cm (180 psi/cm) has been performed using a microdevice that integrates subnanoliter on-chip injection and separation with a miniaturized fluorescence detector. Proteins and peptides were separated on a C18 side-chain porous polymer monolith defined by contact lithography, and injection was achieved via a pressure-switchable fluoropolymer valve defined using projection lithography. Preliminary separations of peptide standards and protein mixtures were performed in 40-200 s, and switching between samples with no detectible sample carryover has been performed. The injections and separations were reproducible; the relative standard deviation (RSD) for retention time was 0.03%, and peak area RSD was 3.8%. Sample volumes ranging from 220 to 800 pL could be linearly metered by controlling the pressure injection pulse duration with conventional timing and valving. The current prototype system shows the potential for rapid and autonomous HPLC separations with varying modalities and the potential for direct connection to mass spectrometers at nanospray flow rates.     

On-chip high-pressure picoliter injector for pressure-driven flow through porous media

A high-pressure (> 3 MPa) on-chip injector has been developed for microchip applications including HPLC. The mechanical injector is implemented using in situ photopolymerization of fluorinated acrylates inside wet-etched silica microchips. The injector allows reproducible injections as small as 180 pL with < 250 ms duration. The injector operated robustly over 60 days and over 1000 injections. The injector is unique among polymer-based valves as it functions in aqueous, acetonitrile, and mixed buffers at high pressures without detectable leakage.     

Ergonomics in rehabilitation: a comparison of two methods of moving an empty manual wheelchair short distances

Phthalimidomethyl derivatives 1, encompassing a wide range of leaving group abilities, are rapidly hydrolysed to the corresponding phthalamic acid via rate-determining attack at the phthalimide carbonyl group.     

Reversible ischemia determined by xenon-enhanced CT after 90 minutes of complete basilar artery occlusion

Intraarterial thrombolytic therapy decreases mortality in the treatment of acute basilar artery occlusion. An acute decrease in cerebral blood flow (CBF) (<12 mL/100 g per minute) has been reported to invariably result in infarction. We report a case of acute basilar artery occlusion, recanalized within 90 minutes, with reversal of CBF of less than 6 mL/100 g per minute. After reperfusion, areas with persistent CBF of 6 mL/100 g per minute resulted in infarctions on subsequent CT studies. Parenchymal viability is possible after 90 minutes of posterior CBF of 6 mL/100 g per minute.     

Solid-state 2H NMR study of methyl-d3-cobalamin

A solid-state 2H NMR study of methyl-d3-cobalamin has been performed as a function of temperature to provide information concerning the character and energetics of the motion performed by this unique bioorganometallic methyl group. Analysis of the 2H NMR line shape indicates that the methyl group undergoes rapid three-fold rotation, and that the Co-C-2H angle lies between 105.9 and 109.5 degrees. Determination of the spin-lattice relaxation times T1 shows that the relaxation is anisotropic, consistent with a "jumping" motion of the methyl group rather than rotational diffusion. This also provides the activation energy to methyl jumps as 8.3 +/- 1.3 kJ/mol. It is proposed that this energetic barrier may be a useful probe of changes in the electronic character of the Co-C bond that accompany the biological role of this molecule in such enzymes as methionine synthase.     

Appraisal as a Pervasive Determinant of Anger.

L. Berkowitz and E. Harmon-Jones (see record 2004-15096-001) challenge appraisal theories of emotion by describing 2 sets of conditions (physical discomfort and anger-related muscle actions) in which anger appears to be elicited in the absence of theoretically predicted appraisals. In response, the authors discuss the ability of the specific appraisal model they have developed (e.g., C. A. Smith & L. D. Kirby, 2000, 2001; C. A. Smith & R. S. Lazarus, 1990) to account for such instances of anger. First, a number of issues are clarified relevant to the authors' model, including the nature of both the cognitive operations underlying appraisal and the specific appraisals hypothesized to evoke anger. The authors then describe how their model can account for the instances of anger described by L. Berkowitz and E. Harmon-Jones and how both accounts might be tested. (PsycINFO Database Record (c) 2010 APA, all rights reserved)