A comparative study of the electrical and mechanical properties of epoxy nanocomposites reinforced by CVD- and arc-grown multi-wall carbon nanotubes

In this study, three different types of multi-wall carbon nanotubes (MWCNTs) were compared as nanostructured reinforcements in epoxy polymers: commercially available CVD-MWCNTs, synthesised in an industrial process, aligned-CVD-MWCNTs and arc-grown MWCNTs, both obtained from a lab-scale processes. The nanocomposite properties were characterised by means of electron microscopy, rheological, electrical and mechanical methods. Industrial CVD-MWCNTs are favourable for the implication of an electrical conductivity in the epoxy due to their high tendency to form conducting networks. The less entangled structure of aligned-CVD-MWCNTs turns out to be favourable for an easy dispersion and low viscosity in epoxy at similar conductivities compared to the CVD-MWCNTs. Additionally, they provide the highest increase in fracture toughness (∼17%). Arc-grown MWCNTs do not offer any electrical conductivity in epoxy without sufficient purification methods. Their high level of impurities and short length further complicate the transfer of their good electrical and mechanical properties into the nanocomposite.     

Relations between anxiety sensitivity, distress tolerance, and fear reactivity to bodily sensations to coping and conformity marijuana use motives among young adult marijuana users.

The present investigation examines anxiety sensitivity, distress tolerance, and fear reactivity to bodily sensations in relation to Coping and Conformity marijuana use motives among a sample of young adult marijuana users (n = 135; 46.7% women; Mage = 20.45, SD = 5.0). After controlling for current marijuana use frequency (past 30 days), daily cigarette smoking rate, average volume of alcohol used over the past year, negative affectivity, and other marijuana use motives, anxiety sensitivity was significantly and uniquely associated with Coping and Conformity motives for marijuana use. Distress tolerance evidenced significant and unique incremental relations to Coping motives, whereas fear reactivity to bodily sensations was unrelated to any marijuana use motive. These results provide novel information related to the role of emotional sensitivity and tolerance factors as they pertain to specific types of motives for marijuana use among young adults. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Transcriptome Analyses of Adipose Tissue Samples Identify EGFL6 as a Candidate Gene Involved in Obesity-Related Adipose Tissue Dysfunction in Children

Obesity develops early in childhood and is accompanied by early signs of adipose tissue (AT) dysfunction and metabolic disease in children. In order to analyse the molecular processes during obesity-related AT accumulation in children, we investigated genome-wide expression profiles in AT samples, isolated adipocytes, and stromal vascular fraction (SVF) cells and assessed their relation to obesity as well as biological and functional AT parameters. We detected alterations in gene expression associated with obesity and related parameters, i.e., BMI SDS, adipocyte size, macrophage infiltration, adiponectin, and/or leptin. While differential gene expression in AT and adipocytes shared an enrichment in metabolic pathways and pathways related to extracellular structural organisation, SVF cells showed an overrepresentation in inflammatory pathways. In adipocytes, we found the strongest positive association for epidermal growth factor-like protein 6 (EGFL6) with adipocyte hypertrophy. EGFL6 was also upregulated during in vitro adipocyte differentiation. In children, EGFL6 expression was positively correlated to parameters of AT dysfunction and metabolic disease such as macrophage infiltration into AT, hs-CRP, leptin levels, and HOMA-IR. In conclusion, we provide evidence for early alterations in AT gene expression related to AT dysfunction in children and identified EGFL6 as potentially being involved in processes underlying the pathogenesis of metabolic disease.     

Characteristics of wet‐spun and thermally treated poly acrylonitrile fibers

The performance of carbon fibers depends on the quality of the precursor and the conditions of the thermal treatment. In detail, for a PAN precursor fiber the viscosity of a spinning dope and the draw ratio during the spinning process needs to be considered. Through wet spinning, different types of PAN precursor fibers with defined spinning parameters, including solid content, solvent content in a bath, and especially draw ratio resulting in defined cross section diameters, were fabricated and analyzed with tensile tests, density investigations, SEM, TGA‐MS, FTIR, and XRD. The results show that the mechanical properties of the fibers correlate to crystallinity. The cross section diameter is strongly related to the morphology of the fibers after thermal treatment. By extending the postdrawing of PAN fibers high tenacities were obtained at the cost of the cross section shape. In addition, TGA measurements reveal trapped residues of the wet spinning process as well as show several chemical reactions takes place at the same time at different temperatures. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43698.     

Injection molding of products with functional surfaces by micro-structured, PVD coated injection molds

Molding of micro structures by injection molding leads to special requirements for the molds e.g. regarding wear resistance and low release forces of the molded components. At the same time it is not allowed to affect the replication precision. Physical vapor deposition (PVD) is one of the promising technologies for applying coatings with adapted properties like high hardness, low roughness, low Young’s modulus and less adhesion to the melt of polymers. Physical vapor deposition technology allows the deposition of thin films on micro structures. Therefore, the influence of these PVD layers on the contour accuracy of the replicated micro structures has to be investigated. For this purpose injection mold inserts were laser structured with micro structures of different sizes and afterwards coated with two different coatings, which were deposited by a magnetron sputter ion plating PVD technology. After deposition, the coatings were analyzed by techniques regarding hardness, Young’s modulus and morphology. The geometries of the micro structures were analyzed by scanning electron microscopy before and after coating. Afterwards, the coated mold inserts were used for injection molding experiments. During the injection molding process, a conventional and a variothermal temperature control of the molds were used. The molded parts were analyzed regarding roughness, structure height and structure width by means of laser microscopy.     

Sibling relationship quality and adolescent delinquency: A latent growth curve approach.

The present study examined whether level and changes in sibling relationship quality and older sibling delinquency are related to level and changes in younger sibling delinquency, for brother, sister, older brother/younger sister and older sister/younger brother sibling pairs. Questionnaire data were collected from 249 Dutch sibling pairs (11–15 years old) over a period of three years, with annual measurements. Results showed that level and over-time changes in sibling relationship quality and older and younger sibling delinquency were significantly different for the four sibling gender combinations. Results of multivariate growth curve modeling showed that sibling relationship quality was related to delinquency of older siblings (but not younger siblings), and delinquency of older siblings was associated with younger sibling delinquency two years later. We also found differences between the four sibling gender combinations. For example, for brother and sister pairs (but not mixed-sex sibling pairs), over-time changes in older sibling delinquency were related to younger sibling delinquency two years later as well as the change pattern in younger sibling delinquency over time. Strengths, limitations and possible implications for research and intervention of adolescent delinquency are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Soft Futures: Mushrooms and Regenerative Design

Three recent projects fabricated from living mushroom bricks that create a visceral experience of mycelium biocomposites are described as a natural example of a “soft system.” The move toward soft, regenerative systems has important implications for the way we approach the production of architectural materials and environments in the Anthropocene. Collectively, the projects suggest a future in which dynamic materials that contribute to local ecosystems are grown rather than manufactured and engage with temporality in new and productive ways.