Stromal CCL5 Promotes Breast Cancer Progression by Interacting with CCR3 in Tumor Cells

Chemokines secreted from stromal cells have important roles for interactions with carcinoma cells and regulating tumor progression. C-C motif chemokine ligand (CCL) 5 is expressed in various types of stromal cells and associated with tumor progression, interacting with C-C chemokine receptor (CCR) 1, 3 and 5 expressed in tumor cells. However, the expression on CCL5 and its receptors have so far not been well-examined in human breast carcinoma tissues. We therefore immunolocalized CCL5, as well as CCR1, 3 and 5, in 111 human breast carcinoma tissues and correlated them with clinicopathological characteristics. Stromal CCL5 immunoreactivity was significantly correlated with the aggressive phenotype of breast carcinomas. Importantly, this tendency was observed especially in the CCR3-positive group. Furthermore, the risk of recurrence was significantly higher in the patients with breast carcinomas positive for CCL5 and CCR3 but negative for CCR1 and CCR5, as compared with other patients. In summary, the CCL5-CCR3 axis might contribute to a worse prognosis in breast cancer patients, and these findings will contribute to a better understanding of the significance of the CCL5/CCRs axis in breast carcinoma microenvironment.     

Effects of calcining conditions of kaolinite on pore structures of mesoporous materials prepared by the selective leaching of calcined kaolinite

This paper describes the effects of calcining conditions of kaolinite on pore structures of the porous materials obtained from the selective leaching of calcined kaolinite using KOH solution. Mesoporous -Al₂O₃ was the predominant crystalline phase in the samples calcined in the temperature range between 950°C and 1050°C for 24 h. The mean specific surface area of these samples was approximately 250 m² · g^–1 and the mean total pore volume was approximately 0.8 ml · g^–1. The pore size distribution curves of these samples showed a sharp peak at around 2–3 nm pore radius. This peak was sharper for the sample calcined at 1000°C for 24 h. On the other hand, the pore sizes of the sample calcined at 1100°C for 24 h increased abruptly to 10–20 nm and this change corresponded to the formation of mullite in the sample. The pore sizes of the samples calcined at 1100°C varied with calcining time. The specific surface area and total pore volume decreased, the longer the calcining time of the samples, and this was correlated with an increase in the amount of mullite in the samples.     

High Thermal Conductivity in Silicon Nitride with Anisotropie Microstructure

Silicon nitride was fabricated by tape casting of α-Si₃N₄ powder with 5 wt% Y₂O₃ and 5 vol% rodlike β-Si₃N₄ seed particles, followed by tape stacking, hot pressing under 40 MPa, and annealing at 1850°C for 2-66 h under a nitrogen pressure of 0.9 MPa. Silicon nitrides fabricated by this procedure exhibited a highly anisotropic microstructure with large elongated grains (developed from seed particles) uniaxially oriented parallel to the casting direction. Thermal conductivities parallel to the grain alignment were much higher than those measured in other directions and exhibited high values of up to 120 W/(m.K). The anisotropic thermal conductivity of the specimen could be explained by the rule of mixture, considering that large elongated grains developed from seeds have higher thermal conductivity than a small-grained matrix.     

Low‐velocity impact response and compression after impact assessment of recycled carbon fiber‐reinforced polymer composites for future applications

The influence of recycling on the impact damage resistance of recycled carbon fiber‐reinforced polymer (CFRP) composites was investigated using low‐velocity impact and compression after impact (CAI) tests. The relationships among load, force, and time were analyzed to gain insight into the damage characteristics of three types of composite laminate: virgin CF‐reinforced polymer (V‐CFRP), recycled CF‐reinforced polymer (R‐CFRP), and treated recycled CF‐reinforced polymer (TR‐CFRP). Special emphasis was placed on evaluating the extent of damage and the residual mechanical properties as affected by three different fiber surface states. Substantial differences were noted in the shape, area, and damage mode of impact using ultrasonic c‐scanning, photography, and scanning electron microscopy (SEM). V‐CFRP indicated significant improvement in impact damage resistance in the form of less damage, higher residual strength, and greater shear failure angle. Damage resistance was improved up to 80% of V‐CFRP by surface cleaning while R‐CFRP is 50% of V‐CFRP. Shear failure angle of 16° was attained from R‐CFRP and it was increased to 24° when the recycled fibers were cleaned. The result of SEM showed that there was less delamination of TR‐CFRP compared with R‐CFRP. This work proves that the low‐velocity impact response of recycled composites can rival that of virgin composites, while providing a basis for future applications of recycled carbon in many fields. POLYM. COMPOS., 35:1494–1506, 2014. © 2013 Society of Plastics Engineers     

Conditions for growth of AlN single crystals in Al–Sn flux

In this study, we investigated the Al–Sn flux system and its growth conditions to obtain AlN single crystals. AlN single crystals of a size of 50 μm were successfully grown using an Al–Sn melt under nitrogen gas pressure. The growable region of the AlN crystals was established using a pressure‐temperature diagram. The required nitrogen gas pressure for the growth of the AlN crystals was found to decrease with increasing temperature, and AlN was grown at 0.1 MPa nitrogen pressure above 1300°C. By investigating the AlN yield with various Al concentrations, we confirmed that the Al component in the Al–Sn melt facilitated nitrogen dissolution. Finally, scanning electron microscopy analysis showed that the obtained AlN particles showed good morphology.     

Intra-body data transmission for the personal area network

Intra-body communication is a wireless means of exchanging information within a personal area network (PAN) between wearable electronic sensors and devices. The feasibility of intra-body communication is confirmed through several experiments on signal propagation within the human body, and a human phantom is designed and used to obtain reproducible results over repeated experiments. Based on the results of these experiments, a prototype transmission system is constructed using aluminum electrodes powered by 3 V DC and operating in the 10.7 MHz frequency modulation (FM) band. This prototype is demonstrated to be capable of transmitting analog signals through the human subjects in the presence of external noise. Digital data transmission at 9600 bps is also achieved using newly fabricated 10.7 MHz frequency shift keying (FSK) transmitter and receiver devices. The carrier frequency of 10.7 MHz is the intermediate frequency of FM radio receivers, meaning that the proposed system can make use of a wide selection of inexpensive, commercial radio frequency devices.     

Contact force detection on a minute aperture mounted optical contact slider using an acoustic emission sensor

Advances in the digital network society require both higher density and higher transfer rates in all sorts of storage systems. Especially in optical recording, the trend toward higher density and larger capacity requires novel surface-recording technologies that can drastically diminish head-to-medium spacing, resulting in an improvement in spatial resolution and, finally, a higher recording density. To this end, we have already proposed a novel contact optical head slider that is able to almost cancel the suspension load by generating hydrodynamic pressure, thus realizing a lower net contact force. Evaluating the dynamic contact force is requisite in realizing its stable sliding operation and higher signal readout performance. In this study, a continuous acoustic emission (AE) signal was utilized to detect the dynamic contact force. AE signal modulation was compared with the applied out-of-plane acceleration on a medium generated by a spindle combined piezo-electric actuator. It was clarified that the detected AE modulation amplitude was approximately proportional to the applied acceleration, and that utilizing AE modulation will be a useful method for evaluating dynamic contact force.     

Platform design for large-scale artificial market simulation and preliminary evaluation on the K computer

Artificial market simulations have the potential to be a strong tool for studying rapid and large market fluctuations and designing financial regulations. High-frequency traders, that exchange multiple assets simultaneously within a millisecond, are said to be a cause of rapid and large market fluctuations. For such a large-scale problem, this paper proposes a software or computing platform for large-scale and high-frequency artificial market simulations (Plham: /pl\(\Lambda\)m). The computing platform, Plham, enables modeling financial markets composed of various brands of assets and a large number of agents trading on a short timescale. The design feature of Plham is the separation of artificial market models (simulation models) from their execution (execution models). This allows users to define their simulation models without parallel computing expertise and to choose one of the execution models they need. This computing platform provides a prototype execution model for parallel simulations, which exploits the variety in trading frequency among traders, that is, the fact that some traders do not require up-to-date information of markets changing in millisecond order. We evaluated a prototype implementation on the K computer using up to 256 computing nodes.     

The effect of lutein supplementation on visual fatigue: A psychophysiological analysis

We used psychophysiological technology to examine the effect of an oral supplement, a combination of lutein, zeaxanthin and blackcurrant extract (LUT), on visual fatigue, within the context of a randomized, double-blind, placebo-controlled cross-over trial. The LUT supplement and placebo samples were randomly assigned to thirteen participants, who took the samples for two LUT (and vice versa) for another 2 week. Each participant completed visual proof reading tasks for 2 h during each of four testing sessions. Saccade tests were administered before and after the proof reading task, during which the participants moved their eyes back and forth between two targets positioned in the center of two checkerboards. We recorded EEG, EOG, heart rate, and facial muscle potential/performance during the saccade tests. Blood pressure was measured and subjective fatigue and stress scores were collected before and after the proof reading task. We averaged EEG starting at saccade offset in order to analyze eye fixation related potentials (EFRP). Our results suggested that the proof reading task induced visual fatigue. An analysis of EFRP and other psychophysiological data revealed significant differences between the LUT and placebo conditions. These results suggest that supplementation with LUT could help to reduce symptoms of visual fatigue.     

Parsing human skeletons in an operating room

Multiple human pose estimation is an important yet challenging problem. In an operating room (OR) environment, the 3D body poses of surgeons and medical staff can provide important clues for surgical workflow analysis. For that purpose, we propose an algorithm for localizing and recovering body poses of multiple human in an OR environment under a multi-camera setup. Our model builds on 3D Pictorial Structures and 2D body part localization across all camera views, using convolutional neural networks (ConvNets). To evaluate our algorithm, we introduce a dataset captured in a real OR environment. Our dataset is unique, challenging and publicly available with annotated ground truths. Our proposed algorithm yields to promising pose estimation results on this dataset.