Investigation of the action of flame retardants in cellulose. I. Investigation of the flame retardant action of 2,2′-oxybis(5,5-dimethyl-1,3,2-dioxaphosphorinane-2,2′-disulfide) in cellulose

Pyrolysis experiments were performed in high vacuum and under reduced air pressure (100 Pa). The volatile products of pure cellulose and cellulose containing various amounts of flame retardant 2,2′-oxybis (5,5-dimethyl-1,3,2-dioxaphosphorinane-2,2′-disulfide), i.e., Sandoflam 5060 of Sandoz AG, were studied by means of gas chromatography in combination with mass spectroscopy. The volatile products were characterized with infrared spectroscopy. The studied revealed that the incorporation of the flame retardant enhanced the water release and shifted the onset of this reaction to lower temperature. On the basis of these findings an explanation for the mechanism of flame retardancy in generated cellulose fibers modified with this particular flame retardant is attempted. From experiments with different residual air pressure the influence of oxygen on the primary processes of the pyrolytic degradation of cellulose is being discussed.     

An analog circuit design environment based on cooperating blackboard systems

A novel approach to design automation for analog circuits is presented. The prototype implementation-OASE-has been realized as a set of cooperating expert systems with blackboard architecture. The circuit specific knowledge bases use hybrid representation schemes and are strictly separated from an execution engine containing the necessary control knowledge. This alleviates the knowledge acquisition process as well as the extension and maintenance of existing knowledge. OASE has been developed as a design assistant, featuring different levels of interactivity, a hierarchical design style and fully embedded algorithmic standard tools. In its current version it is able to design a broad range of different CMOS operational amplifiers.     

Computing Minimal Multi-Homogeneous Bezout Numbers Is Hard

The multi-homogeneous Bezout number is a bound for the number of solutions of a system of multi-homogeneous polynomial equations, in a suitable product of projective spaces. Given an arbitrary, not necessarily multi-homogeneous, system, one can ask for the optimal multi-homogenization that would minimize the Bezout number. In this paper it is proved that the problem of computing, or even estimating, the optimal multi-homogeneous Bezout number is actually NP-hard. In terms of approximation theory for combinatorial optimization, the problem of computing the best multi-homogeneous structure does not belong to APX, unless P = NP. Moreover, polynomial-time algorithms for estimating the minimal multi-homogeneous Bezout number up to a fixed factor cannot exist even in a randomized setting, unless BPP ⫆ NP.     

The US market for SO2 permits: Policy implications of the low price and trading volume

The price of SO₂ permits and the volume of trading under the US Acid Rain Program have been lower than expected. This can be explained by the creation and distribution of more permits than were initially authorized, by the sale of permits by high cost abaters who are subject to more stringent local emission constraints or who have irreversibly invested in high cost abatement technologies and by the deregulation of the natural gas and railroad industries which, in combination with incentives for cost-cutting under the new market approach to SO₂ control, has lowered marginal costs of abatement curves and made them more uniform across powerplants. The low price of permits and low trading volume are evidence that market approaches to pollution control can be more cost-effective than command and control regulations. The effect of public policies and technological changes on the allowance market are usefully examined in the context of an ideal market, in which the equilibrium price of allowances equals the marginal cost of abatement of individual powerplants. Using recent data from Coggins and Swinton (1996), we are able to explain the current price of permits with some accuracy.     

Nutzung unterschiedlicher Streulichtanteile zur Partikelgrößen-Bestimmung in dispersen Systemen

Utilisation of Different Components of Scattered Light for Particle Size Determination in Dispersed Systems . Light scattered by finely and coarsely dispersed particles can be used in variety of ways for characterization of sprays, emulsions, or suspensions. The characteristic of greatest interest is the particle size or the particle size distribution. While homogeneous, coarsely dispersed particles at sufficient dilutions and randomly distributed in a transparent continuous phase are generally amenable to particle size analysis, finely dispersed particles at higher concentrations or coarsely dispersed particles containing finely dispersed components are often difficult to measure. This article discusses ways of overcoming such difficulties on the basis of examples taken mainly from phase Doppler anemometry.     

Determination of carbon black fillers in vulcanizates of natural rubber by metathesis degradation

A method for the determination of carbon black fillers in peroxide vulcanizates or sulfur vulcanizates of natural rubber (NR, cis-1,4-polyisoprene) by metathesis degradation with 1-octene was developed using the catalyst WCl₆? (C₂H₅)₃Al₂Cl₃. The carbon black was separated from the reaction mixture by centrifuging and determined by weighing. In this connection, investigations were also performed with the catalyst WCl₆? C₂H₅Al₂Cl₃ which was less suitable for filler determination. The rate of degradation of crosslinked NR with (E)-4-octene was measured. Metathesis reactions of 2-methyl-2-pentene (low-molecular-weight model compound of NR) with 7-tetradecene showed the importance of double bond shift for the degradation of NR.     

Numerical study on PEMFC’s geometrical parameters under different humidifying conditions

Steady-state and three-dimensional simulations were carried out to study the influences of geometrical parameters on the performance of PEMFC under different hydrating conditions. Flow fields, species transport, transport of water in polymer membrane and movement of liquid water in cathode and anode porous layers were determined, in order to accomplish a complete estimation of ohmic and concentration losses of PEMFC power. The geometrical parameters were thickness of the polymer membrane, cathode catalyst layer as well as gas channel to rib width ratio. Every simulation was made under different relative humidities of inlet flows (50 and 100%) for every change of characteristic length. Results show that the influence of the geometrical parameters on ohmic and concentration losses is of considerable importance. The performance of PEMFC is seriously affected under dehydrating conditions. However, such performance may be considerably improved by using suitable geometrical parameters. Cathode and anode liquid saturation may not only affect the transport of species, but also the polymer electrolyte water content. These results show the importance of simultaneously calculating both the water absorption and desorption through the polymer electrolyte and the liquid saturation in the cathode and anode porous mediums to obtain an actual view of ohmic and concentration losses of the PEMFC performance.     

Subnanometer-scale chemistry and structure of α-iron/molybdenum nitride heterophase interfaces

The local chemistry and structure of α-iron/molybdenum nitride heterophase interfaces is studied on a subnanometer scale by atom-probe field-ion microscopy (APFIM), three-dimensional atom-probe microscopy (3DAPM) and both conventional transmission electron microscopy (CTEM) and highresolution electron microscopy (HREM). Molybdenum nitride precipitates are generated by annealing Fe-2 at. pct Mo-X, where X=0.4 at. pct Sb or 0.5 at. pct Sn, at 550 °C or 600 °C, in an ammonia/hydrogen mixture. Internal nitridation at 550 °C produces thin, coherent platelet-shaped molybdenum nitride precipitates. Nitridation at 600 °C generates a much coarser structure with semicoherent thick plate-shaped and spheroidal precipitates in addition to the thin-platelet structure. The APFIM and 3DAPM analyses of the heterophase interfaces show substantial segregation of the solute species Sn and Sb only at the coarse precipitates, with Gibbsian interfacial excesses of up to 7±3 nm⁻², whereas the broad faces of the thin platelets have no detectable segregation. The TEM and HREM analyses show that the coarse precipitates are semicoherent, whereas the thin platelets are either coherent or have much fewer misfit dislocations than geometrically necessary. This demonstrates that Sn and Sb segregation is related to the presence of misfit dislocations at the interfaces of the coarse precipitates. This article is based on a presentation made at the symposium entitled “The Mechanisms of the Massive Transformation,” a part of the Fall 2000 TMS Meeting held October 16–19, 2000, in St. Louis, Missouri, under the auspices of the ASM Phase Transformations Committee.