Buchbesprechungen

Ohne Zusammenfassung     

Characterization of Micro-Powders for the Fabrication of Compression Molded THz Lenses

We investigate different micro-powders that can be used as base materials for THz lenses fabricated by compression molding. For this application materials with a very weak THz absorbance and low dispersion are required. By measuring the THz absorption coefficient and refractive index of pellets pressed from the different micro-powders, we identify several materials that are well suited for the fabrication of compression molded THz lenses (CMLs). In addition, a considerable range of the refractive index is covered by the samples, which will allow for the fabrication of CMLs with different focal lengths for one and the same lens design.     

Image-based rendering of complex scenes from a multi-camera rig

Image-based rendering is a method to synthesise novel views from a set of given real images. Two methods to extrapolate novel views of complex scenes with occlusions and large depth discontinuities from images of a moving uncalibrated multi-camera rig are described. The real camera viewpoints are calibrated from the image data and dense depth maps are estimated for each real view. Novel views are synthesised from this representation with view-dependent image-based rendering techniques at interactive rates. Since the 3D scene geometry is available in this approach, it is well suited for mixed reality applications where synthetic 3D objects are seamlessly embedded in the novel view.     

Fluoroscopy-based 3-D reconstruction of femoral bone cement: a new approach for revision total hip replacement

In revision total hip replacement the removal of the distal femoral bone cement can be a time consuming and risky operation due to the difficulty in determining the three-dimensional (3-D) boundary of the cement. We present a new approach to reconstruct the bone cement volume by using just a small number of calibrated multiplanar X-ray images. The modular system design allows the surgeon to react intraoperatively to problems arising during the individual situation. When encountering problems during conventional cement removal, the system can be used on demand to acquire a few calibrated X-ray images. After a semi-automatic segmentation and 3-D reconstruction of the cement with a deformable model, the system guides the surgeon through a free-hand navigated or robot-assisted cement removal. The experimental evaluation using plastic test implants cemented into anatomic specimen of human femoral bone has shown the potential of this method with a maximal error of 1.2 mm (0.5 mm RMS) for the distal cement based on just 4-5 multiplanar X-ray images. A first test of the complete system, comparing the 3-D-reconstruction with a computed tompgraphy data set, confirmed these results with a mean error about 1 mm.     

Reliability Potential Of Epoxy Based Encapsulants For Automotive Applications

Automotive under-the-hood electronics often have to withstand temperatures up to 175 °C in combination with harsh environment conditions. This paper gives an overview about the reliability potential of epoxy based encapsulants for automotive applications. Therefore the resistance of epoxy molding compound against typical automotive fluids at temperature of use is analyzed. Six epoxy molding compounds available on the market, showing high temperature automotive potential have been carefully selected to undergo a media resistance testing. For this purpose a dedicated mold tool has been designed and manufactured to prepare these encapsulants for material testing. Thermo-mechanical, mechanical and thermal properties had been determined in initial state directly after molding and after storage in aggressive fluids typical for automotive applications as e.g. gas oil, automatic transmission fluid (ATF), brake fluid or accumulator acid at the respective temperature of use.     

Gravimetric determination of tannins and their correlations with chemical and protein precipitation methods

Abstract. A method for gravimetric determination of tannins based on binding with insoluble polyvinylpyrrolidone (PVP) is presented. The gravimetric method gives the absolute amount of tannins and avoids problems of standards associated with spectrophotometric methods. The method was applied to nine browse and tree leaves. The values obtained correlate significantly with tannins determined spectrophotometrically, protein precipitation capacities and protein precipitable phenotics. This method together with other tannin assays will be useful in nutritional studies. The present study also demonstrates the different behaviour of tannic acids from different commercial sources towards PVP suggesting the presence of different moieties in tannic acids from different commercial sources and even among batches from the same source thereby affecting the results obtained using the spectrophotometric methods. Use of well-defined tannic acid as a standard in spectrophotometric methods is suggested which will allow meaningful comparison of values obtained from different laboratories.     

Identification of the state of palladium in various hydrogenation catalysts by XPS

Various commercial supported palladium hydrogenation catalysts were studied by XPS and treated at ambient pressure with hydrogen and air. Unused catalysts exhibit a significant fraction of divalent Pd (oxide) which is reduced by hydrogen treatment at room temperature. Exposure to air in systems with carbonate, alumina, silica or active carbon as support causes the formation of a solid solution of oxygen in Pd characterized by a Pd 3d chemical shift of ca. + 0.4 eV. The absolute binding energy of Pd depends strongly on the matrix, indicating a significant contribution of extra-atomic screening, which prevents a direct comparison of reference samples and supported catalysts. Using the oxidation of CO to CO₂ at 300 K as in situ chemical probe it was confirmed that Pd supported on carbonate, silica and alumina exists in the same metallic state which could be activated for the test reaction irrespective of the variation in XPS binding energies.     

Lubrication Studies with Alumina-on-Alumina, Steel-on-Steel, and Steel-on-Alumina Bearing Systems

In metal bearing systems, good lubricants for boundary lubrication generally show chemical interaction with the bearing surface under the conditions of temperature and pressure generated in the sliding contact. In this study, tests in a four-ball wear tester have been used to compare lubricants under similar loadings using steel-on-steel, steel-on-alumina, and alumina-on-alumina bearing systems. In general, the alumina appears to be far less reactive with lubricants than steel. Alumina-on-alumina bearing systems do show a sensitivity to lubricant chemical composition with generally higher wear values than the other two bearing systems. Steel-on-alumina bearing systems generally show better wear characteristics than the all-alumina systems which indicates the improved chemical interactions between the steel and the lubricant. This study shows that the chemical reactivity of the lubricant with the bearing surface is important in the wear process.     

An ionene with spirane structure (spiroionene)

The secondary diamine 1,3,5,7-tetrahydro[1,2c:4,5c'] benzodipyrrole (3) and 1,2,4,5-tetrabromomethylbenzene (1) form a polymeric ionene with spirane structure through a repetitive alkylation reaction. The structure of the product could be proven by¹³C-NMR spectroscopy by comparison with suitable reference compounds. Solutions in aqueous methanol exhibit a typical polyelectrolyte effect. Variation of the counterions produces sufficient solubility in organic solvents. From the crystal structure of a similar model compound one can conclude that the synthesized polymer has a rod-like shape.     

Feststoffbildung durch Kristallisation und Fällung

Formation of solids by crystallization and precipitation. Formation of solids from solutions can take place by crystallization or precipitation. The principal factor is the relationship between solubility and supersaturation. In crystallization, the solubility of the crystallising substance is so high that the formation of solids occurs largely in the metastable zone in the immediate vicinity of the solubility limits. Crystal growth and nucleation are functions of supersaturation. If a high supersaturation is required at low substance-specific growth rates for an adequate crystal growth, high nucleation rates and hence small crystals will result. On this basis, the authors present information for the specific design of crystallization processes. In contrast, the solubility of the precipitated product must be very low for precipitation. Direct crystal formation is possible only for substance systems of high solubility. As a rule, however, the precipitated substance is so insoluble that solids are formed via amorphous intermediates. The results of a large number of experiments show the influence of various parameters of the precipitation process on the filtrability of the precipitated product.