TEM Investigations of Fine Niobium Precipitates in HSLA Steel

Commercially produced 0.03 % C, 0.08 % Nb, 0.01 % Ti high strength low alloyed (HSLA) steel in the form of 20 mm thick plates was investigated. The steel was thermomechanically processed and the mechanical properties of the steel were evaluated by tensile testing. Using analytical and high resolution transmission electron microscopy the distribution, morphology, composition, crystal structure and particle size of niobium and titanium carbonitrides were observed and identified in these steels. The distribution of the precipitates was found to be nearly random, with occasional occurrence of precipitation free zones. Complex agglomerates with a cubic TiN seed crystal overgrown by a cubic NbC particle were the most commonly observed precipitates. Further TEM analysis in the accelerated cooled and tempered specimens in 1/4 plate thickness did not reveal any evidence that additional precipitation in the ferrite occurred. Precipitation in ferrite was only detected after subsequent cold deformation and tempering of the same samples. By a combination of EFTEM, STEM, HRTEM in addition to EDX spectroscopy, a large population of strain induced NbC precipitates with fcc crystal structure ranging in size down to 2 nm were identified in the ferrite matrix.     

Review of ECSC research work in ironmaking

The Treaty of the European Coal and Steel Community (ECSC), which expired in 2002, states in its Article 55 to promote technical and economic research with respect to the production and growing application of coal and steel. The results of funded research projects shall be made available to all representatives and partners concerned. For the European steel industry Article 55 was the basis for building up a steel research programme covering topics from raw materials to steel application and instigated a European network of researchers from the steel industry, research institutes and universities. On the basis of these research and development activities carried out by the ECSC steel research, the iron and steel industry has shown important advances in technology and environmental compatibility. Furthermore, the ECSC steel research has contributed to nearly all important technological developments. The main objective of the ECSC steel Research and Technology Development (RTD) programme was to sustain and develop the Community steel industry's competitiveness. The following report describes fundamental developments and activities within the framework of ECSC research with particular respect to hot metal production in the last 15 years.     

ADAM10 and ADAM17—Novel Players in Retinoblastoma Carcinogenesis

A disintegrin and metalloproteinase (ADAM) family proteins, acting as sheddases, are important factors in a number of pathologies, including cancer, and have been suggested as promising therapeutic targets. The study presented focuses on the involvement of ADAM10 and ADAM17 in retinoblastoma (RB), the most common malignant intraocular childhood tumor. A significant correlation between ADAM17 expression levels and RB laterality and RB staging was observed. Levels of ADAM10 or ADAM17 regulating miRNAs miR-145, -152, and -365 were significantly downregulated in RB cell lines, and reduced miR levels with simultaneously upregulated ADAM10 and ADAM17 expression were found in RB patients. The involvement of both ADAMs analyzed in ectodomain shedding of the neuronal cell adhesion molecule L1 (L1CAM), shown to induce pro-tumorigenic effects in RB, was confirmed. Lentiviral ADAM10 and ADAM17 single or ADAM10/17 double knockdown (KD) induced caspase-dependent apoptosis and reduced cell viability, proliferation, growth, and colony formation capacity of RB cells. Moreover, differential phosphorylation of the serine/threonine kinase AKT was observed following ADAM17 KD in RB cells. Chicken chorioallantoic membrane (CAM) assays revealed that ADAM17 and ADAM10/17 depletion decreases the tumorigenic and migration potential of RB cells in vivo. Thus, ADAMs are potential novel targets for future therapeutic RB approaches.     

The Oncolytic Adenovirus XVir-N-31, in Combination with the Blockade of the PD-1/PD-L1 Axis,Conveys Abscopal Effects in a Humanized Glioblastoma Mouse Model

Glioblastoma (GBM) is an obligatory lethal brain tumor with a median survival, even with the best standard of care therapy, of less than 20 months. In light of this fact, the evaluation of new GBM treatment approaches such as oncolytic virotherapy (OVT) is urgently needed. Based on our preliminary preclinical data, the YB-1 dependent oncolytic adenovirus (OAV) XVir-N-31 represents a promising therapeutic agent to treat, in particular, therapy resistant GBM. Preclinical studies have shown that XVir-N-31 prolonged the survival of GBM bearing mice. Now using an immunohumanized mouse model, we examined the immunostimulatory effects of XVir-N-31 in comparison to the wildtype adenovirus (Ad-WT). Additionally, we combined OVT with the inhibition of immune checkpoint proteins by using XVir-N-31 in combination with nivolumab, or by using a derivate of XVir-N-31 that expresses a PD-L1 neutralizing antibody. Although in vitro cell killing was higher for Ad-WT, XVir-N-31 induced a much stronger immunogenic cell death that was further elevated by blocking PD-1 or PD-L1. In vivo, an intratumoral injection of XVir-N-31 increased tumor infiltrating lymphocytes (TILs) and NK cells significantly more than Ad-WT not only in the virus-injected tumors, but also in the untreated tumors growing in the contralateral hemisphere. This suggests that for an effective treatment of GBM, immune activating properties by OAVs seem to be of greater importance than their oncolytic capacity. Furthermore, the addition of immune checkpoint inhibition (ICI) to OVT further induced lymphocyte infiltration. Consequently, a significant reduction in contralateral non-virus-injected tumors was only visible if OVT was combined with ICI. This strongly indicates that for an effective eradication of GBM cells that cannot be directly targeted by an intratumoral OV injection, additional ICI therapy is required.     

Maximal Pairs of Computably Enumerable Sets in the Computably Lipschitz Degrees

A set A is computably Lipschitz or cl-reducible, for short, to a set B if A is Turing reducible to B by an oracle Turing machine with use function ? such that ? is bounded by the identity function up to an additive constant, i.e., ?(n)??n+O(1). In this paper we study maximal pairs of computably enumerable (c.e.) cl-degrees or maximal pairs, for short, i.e., pairs of c.e. cl-degrees such that there is no c.e. cl-degree that is above both cl-degrees in this pair. Our main results are as follows. (1) A c.e. Turing degree contains a c.e. cl-degree that is half of a maximal pair if and only if this Turing degree contains a maximal pair if and only if this Turing degree is array noncomputable. (2) The cl-degrees of all weak truth-table complete sets are halves of maximal pairs while there is a Turing complete set A such that the cl-degree of A is not half of any maximal pair. In fact, any high c.e. Turing degree contains a c.e. cl-degree that is not half of a maximal pair. (3) Above any c.e. cl-degree there is a maximal pair. (4) There is a maximal pair which at the same time is a minimal pair. (5) There is a pair of c.e. cl-degrees that is not maximal and does not possess a least upper bound. Moreover, we make some observations on the structure of the c.e. cl-degrees in general. For instance, we give a very simple proof of the fact that there are no maximal c.e. cl-degrees.     

Characterization and properties of metallic iron nanoparticles: spectroscopy, electrochemistry, and kinetics

There are reports that nano-sized zero-valent iron (Fe0) exhibits greater reactivity than micro-sized particles of Fe0, and it has been suggested that the higher reactivity of nano-Fe0 may impart advantages for groundwater remediation or other environmental applications. However, most of these reports are preliminary in that they leave a hostof potentiallysignificant(and often challenging) material or process variables either uncontrolled or unresolved. In an effort to better understand the reactivity of nano-Fe0, we have used a variety of complementary techniques to characterize two widely studied nano-Fe0 preparations: one synthesized by reduction of goethite with heat and H2 (Fe(H2)) and the other by reductive precipitation with borohydride (Fe(BH)). Fe(H2) is a two-phase material consisting of 40 nm alpha-Fe0 (made up of crystals approximately the size of the particles) and Fe3O4 particles of similar size or larger containing reduced sulfur; whereas Fe(BH) is mostly 20-80 nm metallic Fe particles (aggregates of <1.5 nm grains) with an oxide shell/coating that is high in oxidized boron. The FeBH particles further aggregate into chains. Both materials exhibit corrosion potentials that are more negative than nano-sized Fe2O3, Fe3O4, micro-sized Fe0, or a solid Fe0 disk, which is consistent with their rapid reduction of oxygen, benzoquinone, and carbon tetrachloride. Benzoquinone-which presumably probes inner-sphere surface reactions-reacts more rapidly with FeBH than Fe(H2), whereas carbon tetrachloride reacts at similar rates with FeBH and Fe(H2), presumably by outer-sphere electron transfer. Both types of nano-Fe0 react more rapidlythan micro-sized Fe0 based on mass-normalized rate constants, but surface area-normalized rate constants do not show a significant nano-size effect. The distribution of products from reduction of carbon tetrachloride is more favorable with Fe(H2), which produces less chloroform than reaction with Fe(BH).     

Assessment of noise attenuating powertrain components

Forschung im Ingenieurwesen - Wind turbine noise used to be dominated by aerodynamic blade noise, effectively masking mechanical noise, originating from the drivetrain. Successful blade noise...     

Bericht über neue ferromagnetische Werkstoffe

Ohne ZusammenfassungMit 5 Textabbildungen.