A higher-order unsplit-field perfectly matched layer for the reflectionless truncation of 3-D spherical FDTD lattices

An enhanced higher-order finite-difference time-domain (FDTD) method for the systematic implementation of 3-D reflectionless perfectly matched layers (PML) in spherical coordinates is presented. By establishing a topologically unsplit-field formulation, the novel technique introduces accurate nonstandard schemes that eliminate the notably intricate lattice dispersion errors. Moreover, the wider spatial increments are treated via self-adaptive compact operators, while a mesh expansion process yields a significant reduction of the absorber's depth. For the temporal variable, the proposed method employs a multistage leapfrog integration that guarantees stability and excitation universality. Hence, because of the optimal configuration of the new PML, it attains a critical annihilation of both propagating and spurious wave families, even for complicated domains. Numerical investigation verifies the superiority of the higher-order algorithm via several unbounded radiation and scattering spherical problems.     

Spray Drying Performance of a Laboratory Spray Dryer for Tomato Powder Preparation

This work investigates the performance of a spray dryer for tomato powder preparation by spray drying of tomato pulp. Samples of tomato pulp with a 14% constant total solids concentration were used, and a pilot scale spray dryer (Buchi, B-191) with cocurrent operation and a two-fluid nozzle atomizer was employed for the spray drying process. Twenty-four different experiments were conducted keeping constant the feed rate, the feed temperature, and the atomizer pressure, and varying the compressed air flow rate, the flow rate of drying rate, and the air inlet temperature. In each experiment the air outlet temperature was recorded. Data for the residue remaining in the chamber and cyclone walls was gathered and two types of efficiencies were calculated as an indication of the spray dryer performance. Analysis of experimental data yielded correlations between residue accumulation and the variable operating conditions. The same operating parameters had a great influence on the air outlet temperature whereas temperature deviations were observed comparing measured air outlet temperatures with corresponding outlet adiabatic saturation temperatures.     

QUASI‐LIKELIHOOD INFERENCE FOR NEGATIVE BINOMIAL TIME SERIES MODELS

We study inference and diagnostics for count time series regression models that include a feedback mechanism. In particular, we are interested in negative binomial processes for count time series. We study probabilistic properties and quasi‐likelihood estimation for this class of processes. We show that the resulting estimators are consistent and asymptotically normally distributed. These facts enable us to construct probability integral transformation plots for assessing any assumed distributional assumptions. The key observation in developing the theory is a mean parameterized form of the negative binomial distribution. For transactions data, it is seen that the negative binomial distribution offers a better fit than the Poisson distribution. This is an immediate consequence of the fact that transactions can be represented as a collection of individual activities that correspond to different trading strategies.     

Characterisation of Moringa stenopetala seed oil variety “Marigat” from island Kokwa

The oil from Moringa stenopetala seeds variety Marigat from the island Kokwa was extracted using 3 different procedures including cold press (CP), extraction with n‐hexane and extraction with a mixture of chloroform:methanol (1:1) (CM). The yield of oil was 35.7% (CP) to 44.9% (CM). The density, refractive index, colour, smoke point, viscosity, acidity, saponification value, iodine value, fatty acid methyl esters, sterols, tocopherols (by high‐performance liquid chromatography), peroxide value, Eequation/tex2gif-stack-1.gif at 232 nm and the susceptibility to oxidation measured by the Rancimat method were determined. The oil was found to contain high levels of unsaturated fatty acids, especially oleic (up to 76.40%). The dominant saturated acids were behenic (up to 6.01%) and palmitic (up to 6.21%). The oil was also found to contain high levels of β‐sitosterol (up to 52.19%%of total sterols), stigmasterol (up to 16.53% of total sterols) and campesterol (up to 14.26% of total sterols). α‐, β‐ and δ‐tocopherols were detected up to levels of 98.00, 44.50 and 82.41 mg/kg of oil, respectively. The reduction of the induction period (at 120 °C) of M. stenopetala seed oil ranged from 29.4% to 54.7% after degumming. The M. stenopetala seed oil showed high stability to oxidative rancidity. The results of all the above determinations were compared with those of a commercial virgin olive oil and Moringa oleifera seed oil.     

Structure and thermoelectric properties of higher manganese silicides synthesized by pack cementation

Higher manganese silicides (HMS) are promising alternative materials for middle to high temperature thermoelectric applications as a low-cost, non-toxic and highly stable p-type leg. Many of the preparation methods that have been reported previously require long-time and energy consuming processes, as well as expensive equipment, and often do not result in a material of sufficient quality. In this study, the simple, cost-effective and eco-friendly technique of pack cementation is applied. HMS powders synthesized at different experimental conditions are studied and compared considering their structure, composition, short-term thermal stability in air and thermoelectric properties. X-ray diffraction analysis, X-ray photoelectron spectroscopy, scanning electron microscopy, thermogravimetry and thermoelectric measurements (in terms of Seebeck coefficient, electrical and thermal conductivity) were employed for the characterization of the material and evaluation of its performance. All samples were identified as HMS and only some negligible traces of MnSi were detected. They moderately oxidize when heated non-isothermally under air atmosphere up to 1473 K, while the presence of HMS remains dominant even at such high temperatures. Their thermoelectric properties were remarkable for an undoped material, with a maximum figure of merit (ZT) of 0.47 at 777 K. Pack cementation appeared to have a great potential as the synthesis route of high-efficiency HMS.     

Structure–properties investigations in hydrophilic nanocomposites based on polyurethane/poly(2–hydroxyethyl methacrylate) semi‐interpenetrating polymer networks and nanofiller densil for biomedical application

Nanocomposites based on sequential semi–interpenetrating polymer networks (semi–IPNs) of crosslinked polyurethane and linear poly(2‐hydroxyethyl methacrylate) filled with 1–15 wt % of nanofiller densil were prepared and investigated. Nanofiller densil used in an attempt to control the microphase separation of the polymer matrix by polymer–filler interactions. The morphology (SAXS, AFM), mechanical properties (stress–strain), thermal transitions (DSC) and polymer dynamics (DRS, TSDC) of the nanocomposites were investigated. Special attention has been paid to the raising of the hydration properties and the dynamics of water molecules in the nanocomposites in the perspective of biomedical applications. Nanoparticles were found to aggregate partially for higher than 3 and 5 wt % filler loading in semi–IPNs with 17 and 37 wt % PHEMA, respectively. The results show that the good hydration properties of the semi–IPN matrix are preserved in the nanocomposites, which in combination with results of thermal and dielectric techniques revealed also the existence of polymer–polymer and polymer–filler interactions. These interactions results also in the improvement of physical and mechanical properties of the nanocomposites in compare with the neat matrix. The improvement of mechanical properties in combination with hydrophilicity and biocompatibility of nanocomposites are promising for use these materials for biomedical application namely as surgical films for wound treatment and as material for producing the medical devises. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43122.     

Complementary Effects of Carbamylated and Citrullinated LL37 in Autoimmunity and Inflammation in Systemic Lupus Erythematosus

LL37 acts as T-cell/B-cell autoantigen in Systemic lupus erythematosus (SLE) and psoriatic disease. Moreover, when bound to “self” nucleic acids, LL37 acts as “danger signal,” leading to type I interferon (IFN-I)/pro-inflammatory factors production. T-cell epitopes derived from citrullinated-LL37 act as better antigens than unmodified LL37 epitopes in SLE, at least in selected HLA-backgrounds, included the SLE-associated HLA-DRB1*1501/HLA-DRB5*0101 backgrounds. Remarkably, while “fully-citrullinated” LL37 acts as better T-cell-stimulator, it loses DNA-binding ability and the associated “adjuvant-like” properties. Since LL37 undergoes a further irreversible post-translational modification, carbamylation and antibodies to carbamylated self-proteins other than LL37 are present in SLE, here we addressed the involvement of carbamylated-LL37 in autoimmunity and inflammation in SLE. We detected carbamylated-LL37 in SLE-affected tissues. Most importantly, carbamylated-LL37-specific antibodies and CD4 T-cells circulate in SLE and both correlate with disease activity. In contrast to “fully citrullinated-LL37,” “fully carbamylated-LL37” maintains both innate and adaptive immune-cells’ stimulatory abilities: in complex with DNA, carbamylated-LL37 stimulates plasmacytoid dendritic cell IFN-α production and B-cell maturation into plasma cells. Thus, we report a further example of how different post-translational modifications of a self-antigen exert complementary effects that sustain autoimmunity and inflammation, respectively. These data also show that T/B-cell responses to carbamylated-LL37 represent novel SLE disease biomarkers.     

Upper critical solution temperature—type cononsolvency of poly(N,N-dimethylacrylamide) in water—organic solvent mixtures

The behaviour of linear poly(N,N-dimethylacrylamide) (PDMAM) chains was studied by turbidimetry and viscometry in mixtures of water with the polar organic solvents methanol, dioxane and acetone. The swelling-deswelling behaviour of PDMAM gels in the same solvent mixtures was also investigated. Contrary to the behaviour in water-methanol mixtures, in water-dioxane and water-acetone mixtures a significant shrinkage of polymer chains and deswelling of polymer gels, followed by phase separation, was observed for high organic solvent fractions. Cononsolvency phenomena were found to be temperature-dependent, as demixing occurred upon decreasing temperature. This upper critical solution temperature (UCST) phase separation behaviour in mixed solvents was studied by turbidimetry and compared to the well-known lower critical solution temperature (LCST) behaviour of poly(N-isopropylacrylamide) (PNIPAM) in similar solvents mixtures.