Quantitative prediction of the degree of pollution of effluent from reactive dye mixtures

By using mathematical formulae developed in previous studies, certain pollution parameters of dye effluent obtained from reactive dyeing with a single dye can be predicted with good accuracy. In this study, the degree of pollution of reactive dyeing effluent using dye mixtures was also predicted by other approaches, such as linear and non-linear regression. The prediction accuracy was found to be satisfactory.     

物理气相沉积硬质涂层的开发及工程应用

概述了物理气相沉积(PVD)技术的发展过程、特点及工程应用。介绍了香港城市大学先进涂层应用研究实验室(ACARL)近10年来在硬质涂层的开发与应用方面所做的主要工作,包括金刚石薄膜和纳米复合涂层在香港制造业的应用研究,超硬纳米复合涂层的完整性和可靠性研究,以及以脉冲磁控溅射为基础的新型大面积涂层技术的开发和工业化应用研究等。     

An Amphiphilic BODIPY‐Porphyrin Conjugate: Intense Two‐Photon Absorption and Rapid Cellular Uptake for Two‐Photon‐Induced Imaging and Photodynamic Therapy

The new amphiphilic BODPY‐porphyrin conjugate BZnPP and its precursor BZnPH were synthesised, and their linear and two‐photon photophysical properties, together with their cellular uptake and photo‐cytotoxicity, were studied. This amphiphilic conjugate consists of a hydrophobic BODIPY moiety and a hydrophilic tetra(ethylene glycol) chain bridging a cationic triphenylphosphonium group to an amphiphilic porphyrin ZnP through acetylide linkers at its meso positions. A large two‐photon absorption cross‐section (σ=1725 GM) and a high singlet oxygen quantum yield (0.52) were recorded. Intense linear‐ and two‐photon‐induced red emissions were also observed for both BZnPP and BZnPH. Further in vitro studies showed that BZnPP exhibited very efficient cellular uptake and strong photocytotoxic but weak dark cytotoxic properties towards human breast carcinoma MCF‐7 cells. In summary, the two‐photon‐induced emission and the potent photo‐cytotoxicity of BZnPP make it an efficacious dual‐purpose tumour‐imaging and photodynamic therapeutic agent in the tissue‐transparent spectral windows.     

Coexistence of three ferroelectric phases and enhanced piezoelectric properties in BaTiO3–CaHfO3 lead-free ceramics

Perovskite ferroelectrics possess the fascinating piezoelectric properties near a morphotropic phase boundary, attributing to a low energy barrier that the results in structural instability and easy polarization rotation. In this work, a new lead-free system of (1-x)BaTiO₃-xCaHfO₃ was designed, and characterized by a coexistence of ferroelectric rhombohedral-orthorhombic-tetragonal (R-O-T) phases. With the increase amount of CaHfO₃ (x), a stable coexistence region of three ferroelectric phases (R-O-T) exists at 0.06 ≤ x ≤ 0.08. Both large piezoelectric coefficient (d₃₃～400 pC/N), inverse piezoelectric coefficient (d₃₃^*～547 pm/V) and planar electromechanical coupling factor (k_p～58.2%) can be achieved for the composition with x = 0.08 near the coexistence of three ferroelectric phases. Our results show that the materials with the composition located at a region where the three ferroelectric R-O-T phases coexist would have the lowest energy barrier and thus greatly promote the polarization rotation, resulting in a strong piezoelectric response.     

A feedback glucose control strategy for type II diabetes mellitus based on fuzzy logic

Most patients with severe Type II diabetes mellitus, characterised by both insulin resistance and β‐cell failure, eventually require insulin therapy. According to the nonlinear dynamics of homeostasis of blood glucose, proportional‐integral (PI) controller, modified by penalising the feedback error using a fuzzy inference system has been developed to maintain normoglycaemia in a simulated patient using a closed‐loop insulin infusion pump. The simulation employs a compartment model proposed by Vahidi et al. [Vahidi et al., Biochem. Eng. J. 2011, 55(1), 7–16]. The results demonstrate that the fuzzy‐based PI controller is superior to a conventional PI controller for the regulation of blood glucose by insulin infusion for Type II diabetic patients. © 2012 Canadian Society for Chemical Engineering     

Nanoencapsulation of montmorillonite clay within poly(ethylene glycol) nanobeads by electrospraying

The present study describes the preparation and characterization of a novel nanocomposite, based on montmorillonite clay (MMT) encapsulation in poly(ethylene glycol) (PEG) by an electrospraying process. PEG/MMT nanocomposites with MMT contents ranging from 1 to 5 wt % were successfully prepared and characterized in relation to their morphological, spectroscopic, structural, and thermal properties. Scanning electron microscopy, transmission electron microscopy, and atomic force microscopy micrographs showed that the PEG nanobeads formed spherical shapes, and with increasing amount of MMT clay, the size of the beads decreased significantly, ranging from 120 to 3.7 nm. The Fourier transform infrared spectroscopy results suggested that there was no significant chemical interaction between PEG and MMT clay. However, the d‐spacing of MMT clay in PEG/MMT increased, a clear indication of the intercalation of PEG in the interlayer spaces of MMT clay. Furthermore, the thermal stability of PEG polymer decreased upon encapsulation of MMT clay in PEG/MMT composites. Nanoindentation results showed that the hardness and Young's modulus of the PEG/MMT composites increased with 3 wt % loading of MMT. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45048.     

Corrosion resistance of duplex stainless steel subjected to long-term annealing in the spinodal decomposition temperature range

The effect of thermal annealing up to 15,000 h between 300 °C and 500 °C on the corrosion resistance of the duplex stainless steel (DSS) 7MoPLUS has been investigated by using the DLEPR test. Spinodal decomposition in 7MoPLUS is unabated even after annealing for 15,000 h and no healing has been observed. The possible healing mechanisms in this temperature range (back diffusion of Cr atoms from the Cr-rich ferrite (α_Cr) and diffusion of Cr atoms from the austenite) and its absence in the present steel have been discussed.     

Double Hysteresis Loop and Aging Effect in K0.5Na0.5NbO3–K5.4Cu1.3Ta10O9 Lead-Free Ceramics

In this work, the double-loop-like characteristics of K_0.5Na_0.5NbO₃+ x mol% K_5.4Cu_1.3Ta₁₀O₉ ceramic and its relationships with the transition temperature, aging, and switching have been investigated. Our results reveal that the phase transition temperature is an important parameter determining the aging requirement for the ceramics to exhibit the double-loop-like characteristics. For a ceramic with a high transition temperature, e.g. the ceramic with x =0.75 (tetragonal–orthorhombic phase temperature ∼206°C), the vacancies can migrate during the crystal transformation and settle in a distribution with the same symmetry as the crystal after the transformation. As a result, defect dipoles along the polarization direction are formed and provide restoring forces to reverse the switched polarizations, and thus producing a double polarization hysteresis ( P – E ) loop. On the other hand, aging is required for a ceramic with a low transition temperature, e.g. aging at 80°C for 30 days is required for the ceramic with x =1.5 (transition temperature ∼175°C). Our results also reveal that the defect dipoles can be switched under a slow-switching electric field (<1 Hz) or at high temperatures (>100°C), thus leading to an opening of the double P – E loop.     

Enhanced wear performance of nylon 6/organoclay nanocomposite by blending with a thermotropic liquid crystalline polymer

A new approach for improving the wear performances of nylon 6 (PA6)/clay nanocomposites was examined in this study. Two hybrid nanocomposites were prepared by melt blending a thermotropic liquid crystalline polymer (TLCP) and a well‐dispersed PA6/clay nanocomposite, but with and without the incorporation of maleic‐anhydride grafted polypropylene (MAPP) as compatibilizer. The addition of MAPP improved the compatibility between TLCP and matrix and thus enhanced the fibrillation of dispersed TLCP phase. Wear‐testing results revealed that the wear resistance of the compatibilized hybrid nanocomposite could be improved effectively, as indicated by the low values of specific wear rate and frictional coefficient, especially under high‐normal load (i.e., 80 N). Based on the characterization on the worn damage and the debris, it was suggested that abrasive wear was the main‐damage mechanism for all the materials under investigation, except for the compatibilized hybrid nanocomposite. For this system, the wear damage was caused by a combination of abrasive and adhesive wearing because of the formation of transfer film on the counter pin surface from the wear debris. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers     

Effect of antimicrobial compounds tylosin and chlortetracycline during batch anaerobic swine manure digestion

Tylosin and chlortetracycline (CTC) are antimicrobial chemicals that are fed to >45% of the US swine herds at therapeutic and sub-therapeutic dosages to enhance growth rates and treat swine health problems. These compounds are poorly absorbed during digestion so that the bioactive compound or metabolites are excreted. This study investigated the degradation and stabilization of swine manure that contained no additives and compared the observed processes with those of manure containing either tylosin or CTC. The batch anaerobic incubation lasted 216 days. The breakdown of insoluble organic matter through anaerobic hydrolysis reactions was faster for manure containing CTC compared with tylosin or no-antimicrobial treatments. Volatile fatty acid (VFA) accumulation, including acetate, butyrate, and propionate, was greater for CTC-containing manure compared to tylosin and no-antimicrobial treatments. The relative abundance of two aceticlastic methanogens, Methanosaetaceae and Methanosarcinaceae spp., were less for CTC manure than manure with no-antimicrobial treatment. In addition, generation of methane and carbon dioxide was inhibited by 27.8% and 28.4%, respectively, due to the presence of CTC. Tylosin effects on manure degradation were limited, however the relative abundance of Methanosarcinaceae spp. was greater than found in the CTC or no-antimicrobial manures. These data suggest that acetate and other C-1 VFA compounds would be effectively utilized during methanogenesis in the presence of tylosin.