Investigation of laser consolidation process for metal powder by two-color pyrometer and high-speed video camera

This paper deals with the measurement of surface temperature on metal powder during the laser consolidation process with two-color pyrometer. Additionally, the aspect of selective laser sintering (SLS) and selective laser melting (SLM) of metal powder is visualized with high speed video camera. As a result, the surface temperature during the laser irradiation was ranged 1520–1810 °C and the consolidation phenomena was classified according to the melting point of metal powder. The metal powder at the heating process cohered intermittently to the melt pool although the laser beam was continuously irradiated to the powder surface.     

Thermal decomposition of cellulose/synthetic polymer blends containing grafted products. V. Cellulose/polystyrene blends

Homogeneous grafting of styrene onto cellulose was carried out in a dimethylacetamide/lithium chloride solvent system. The grafted products were added to cellulose/polystyrene (PS) blends as compatibilizers. The thermal decomposition behavior of the blends was investigated by thermogravimetry. The thermal stability of the blends decreased with an increase in grafted product content. The crystallinity of the blends decreased with grafted product content. The microphase‐separated structures of the blends became finer with grafted product content. The glass transition temperatures for cellulose and PS in the blends were lowered with grafted product content. Differences in thermal decomposition behavior of the blends were correlated with compatibility. Thermogravimetry was effective for compatibility estimation in cellulose/PS blends containing grafted products. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Numerical simulation of critical current performance in Nb3Sn strand subjected to periodic bending deformation

In the ITER Engineering Design Activity (EDA), four NB₃Sn model coils were developed and successfully tested. However, it was revealed that the critical current of the conductor degraded with the increase of electromagnetic force. One of the explanations of this phenomenon is a strand bending caused by enormous electromagnetic force. The authors therefore developed a simulation code using the distributed circuit model to investigate dependency of the critical current performance on the periodic bending deformation. The simulation results were in good agreement with the experiments. The dependence of the critical current on the periodic transverse load, temperature, periodic load pitch, thickness of Ta barrier which prevents Cu stabilizer from being contaminated by Sn, twist pitch of the strand, and RRR of the bronze matrix was investigated using the developed code. The results showed that the critical current degraded less with decreasing the pitch of the transverse load and increasing the Ta barrier thickness. It suggests that the shorter cabling pitch and the larger bending stiffness prevent the critical current degradation. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 171(3): 7–15, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20923     

Highwall Stability due to Punch Mining at Opencut Coal Mines

Conventional highwall mining extracts coal with an auger machine or a continuous miner from exposed seams at the base of opencut or strip operations. However, under poor strata and high stress conditions, highwall mining cannot be conducted due to pillar and roof failures. In such cases, punch highwall mining is more effective than the conventional highwall mining. This paper describes conventional highwall mining and punch highwall mining systems and discusses the stability of the highwall due to punch highwall mining at opencut coal mines.     

Preliminary Study of Single Phase Preparation and Doping Effect of <Emphasis Type="Italic">β</Emphasis>-Zn<Subscript>4</Subscript>Sb<Subscript>3</Subscript>

Single phase β-Zn₄Sb₃ was prepared by the application of a two-stage heat treatment, and impurity elements were doped. The undoped and doped samples were prepared by direct melting followed by two-stage heat treatment at 450°C and 400°C after solidification of the samples in sealed quartz ampoules. Impurity doping of the samples was performed by the addition of 1 at.% of Se, In, Pb, Te, or Bi. The resulting samples were characterized by x-ray diffraction (XRD), differential thermal analysis (DTA), optical microscopy, and electron probe microanalysis, and their Seebeck coefficients were determined at room temperature. The undoped samples were determined by XRD and DTA to comprise single phase β-Zn₄Sb₃, while the doped samples were composed of multiple phases. From the measurements of the Seebeck coefficient, all samples were found to be p-type and all were found to have almost the same values. These results indicate that β-Zn₄Sb₃ has limited solubility for these impurity elements.     

Rapid evaluation of oxidation catalysis by gas sensor system: total oxidation, oxidative dehydrogenation, and selective oxidation over metal oxide catalysts

The rapid evaluation of catalysis is an indispensable technology for the success of combinatorial chemistry. A small-sized, less expensive, easily operating screening is desirable for parallel settings which dramatically shortens the evaluation time. Recent advances in gas sensors have enabled us to use them for the rapid evaluation of oxidation catalysis. Three typical catalytic oxidations over metal oxide catalysts were evaluated by gas sensor systems optimized for each catalytic system. The first one is the total oxidation of carbon monoxide in air. Five catalytic combustion-type gas sensors were used in a parallel reactor system to shorten the evaluation time. The second one is the oxidative dehydrogenation (ODH) of ethane over the mixed oxide of nickel and iron. The evaluation of the ODH catalysis was performed by a selective olefin sensor which determines the concentration of C₂H₄ in C₂H₆. The third one is the selective oxidation catalysis of propane over alkali modified Fe/SiO₂. The effluents including CO, CO₂, aldehydes and ketones in propane were analyzed by the CO, CO₂ and semiconductor-type gas sensors selective toward aldehydes and ketones. These evaluation results indicated that gas sensors have a good potential for the rapid evaluation of oxidation catalysts.     

Catalytic behavior of AMoOx (A = Ba, Sr) in oxidation of 2-propanol

Perovskite-type oxides, BaMoO₃ and SrMoO₃, were prepared by reduction of scheelite-type oxides, BaMoO₄ and SrMoO₄, in H₂ flow at 873 K and characterized by XRD, TG, SEM, TPR, NH₃-TPD, UV-vis DRS and BET measurement. The catalytic activity of these alkaline-earth molybdenum oxide catalysts was tested for oxidation of 2-propanol with gaseous oxygen under atmospheric pressure. Dehydration to propylene was mainly promoted over the scheelite-type with Mo⁶⁺, while oxidative dehydrogenation to acetone was mainly promoted over the perovskite-type with Mo⁴⁺, and selectivity to acetone was much higher over BaMoO₃ than over SrMoO₃. Both perovskite-type oxide catalysts underwent oxidation to some degree during the catalytic reaction, so that they also contained some Mo⁶⁺. We concluded that the high selectivity to acetone resulting from oxidative dehydrogenation during 2-propanol conversion is related to the constantly changing oxidation state of the catalyst, resulting in coexistence of Mo⁶⁺ octahedra and Mo⁴⁺ octahedra on the AMoO₃ oxides.     

Layered mixed-anion compounds: Epitaxial growth,active function exploration,and device application

Optoelectronic properties and device applications of layered mixed-anion compounds such as oxychalcogenide LaCuOCh (Ch = chalcogen) and oxypnictide LaT_MOPn (T_M = 3d transition metal, Pn = pnicogen) are reviewed. Several distinctive functions have been found in these materials based on our original material exploration concept. Fabrication of high-quality epitaxial films of LaCuOCh leads to clarifying the excellent electrical and optical properties such as high hole mobility of 8 cm²/(V s) and heavy hole doping at >10²¹ cm^?3 in LaCuOSe, and sharp and tunable-wavelength photoluminescence in the solid–solution systems in LaCuOCh. In addition, a room temperature operation of a light-emitting diode is demonstrated using LaCuOSe as a light-emitting layer. These results suggest that the layered oxychalcogenides have potential for light-emitting layers as well as transparent hole-injection layers in organic/inorganic light-emitting diodes. Furthermore, by extending the material system from the copper-based oxychalcogenides to isostructural compounds, transition metal-based oxypnictides LaT_MOP (T_M = Fe, Ni), we have found novel superconductors, LaFeOP and LaNiOP.     

Loss factors of mirrors for a gravitational wave antenna

Low-loss mirrors fabricated by ion-beam-sputtering machines for possible application in an interferometric gravitational wave antenna were evaluated by use of Nd:YAG laser light (lambda = 1064 nm) with two distinct measurements: a tabletop experiment that used a short cavity with a small beam with a beam waist of approximately 2w(0) = 0.82 mm, and an optical test that used a 20-m prototypical gravitational-wave detector with a large beam with a beam waist of approximately 2w(0) = 4.4 mm. A multilayer coating comprised 29 layers of SiO(2)/Ta(2)O(5) and one protective coating of SiO(2). The best values obtained as a result of these measurements were 16 ppm (parts in 10(6)) and 30 ppm in total loss, respectively. Also, a two-dimensional loss map generated by use of a small beam successfully revealed the existence of a loss structure within the coating surface. These results imply that a high-reflectance multilayer coating has some inhomogeneities and a loss distribution with a typical scale of a few millimeters and that the total measured losses depend on the beam spot size.