Optical properties of Nd-doped Ca3(VO4)2 single crystal fiber

Optical absorption and photoluminescence of Ca₃(VO₄)₂ single crystal grown by a floating-zone technique and containing Nd³⁺ ions were investigated. High absorption coefficients and broadening of most absorption bands are present at 300 K, while substructures in some of the same bands can be evidenced at 12 K. Most features of measured spectra are characteristic of random occupation of more than a single Ca²⁺ site by the Nd³⁺ ion and of distortions provoked by different charge compensation mechanisms involving oxygen vacancies promotion in the crystal lattice. Nd³⁺ optical properties were studied by using the Judd-Ofelt theory to calculate the spectral parameters relevant for laser applications.     

X-ray-based measurement of composition during electron beam melting of AISI 316 stainless steel: Part II. Evaporative processes and simulation

An energy dispersive X-ray (EDX) detector mounted on a laboratory scale electron beam furnace (30 kW) was employed to assess the potential use of X-rays as a means of on-line composition monitoring during electron beam (E B) melting of alloys. The design and construction of the collimation and protection systems used for the EDX are described in Part I. In Part II, a mathematical simulation of the heat, mass, and momentum transfer was performed for comparison to the EDX and vapor deposition results. The predicted flow patterns and evaporation rates are used to explain the differences between the two experimental methods. For the EDX spectra measured, the X-rays generated were from the center of the hearth where fluid flow rising from the bulk of the pool is sufficient to maintain the bulk composition despite the high evaporative flux from the surface. The flow moves radially outward from the center of the pool, with the volatile species being depleted. The vapor deposition technique measures the entire region, giving an average surface composition, and it therefore differs from the EDX results, which gave a near bulk composition. This combined study using in-situ EDX measurements and numerical simulations both provided an insight into the phenomena controlling the evaporation in an EB-heated system and demonstrated the viability of using EDX to measure the bulk composition during EB melting processes.     

Effect of spinneret hole diameter on the spinning and properties of acetate fibre

Conclusions The effect of the number and diameter of spinneret holes on hole clogging and the properties of acetate yarns has been investigated under manufacturing conditions.On reducing spinneret hole diameter and increasing the number of holes, the strength and fatigue properties are raised, but the elongation of acetate yarn is reduced.Translated from Khimicheskie Volokna, No. 1, pp. 29–30, January–February, 1986.     

The influence of annealing on the conductivity of magnesium films

Polycrystalline magnesium films were deposited under ultrahigh vacuum by thermal evaporation onto a cooled silica substrate. During the growth process of a film a number of lattice defects are incorporated. It was found that the defect density decreases with increasing thickness. An annealing study of the electrical resistance and defect density in magnesium films was made. The results were interpreted on the basis of Vand's theory. The function F₀ expressing the law of distribution of the decay energies exhibited a maximum. For thick films there was no appreciable variation in the activation energy with thickness. In this case the evaluated activation energy E was found to be about 0.35 eV. For very thin films this energy decreases with increasing thickness.     

Investigations of high-performance GaAs solar cells grown on Ge-Si/sub 1-x/Ge/sub x/-Si substrates

High-performance p/sup +//n GaAs solar cells were grown and processed on compositionally graded Ge-Si/sub 1-x/Ge/sub x/-Si (SiGe) substrates. Total area efficiencies of 18.1% under the AM1.5-G spectrum were measured for 0.0444 cm/sup 2/ solar cells. This high efficiency is attributed to the very high open-circuit voltages (980 mV (AM0) and 973 mV (AM1.5-G)) that were achieved by the reduction in threading dislocation density enabled by the SiGe buffers, and thus reduced carrier recombination losses. This is the highest independently confirmed efficiency and open-circuit voltage for a GaAs solar cell grown on a Si-based substrate to date. Larger area solar cells were also studied in order to examine the impact of device area on GaAs-on-SiGe solar cell performance; we found that an increase in device area from 0.36 to 4.0 cm/sup 2/ did not degrade the measured performance characteristics for cells processed on identical substrates. Moreover, the device performance uniformity for large area heteroepitaxial cells is consistent with that of homoepitaxial cells; thus, device growth and processing on SiGe substrates did not introduce added performance variations. These results demonstrate that using SiGe interlayers to produce "virtual" Ge substrates may provide a robust method for scaleable integration of high performance III-V photovoltaics devices with large area Si wafers.     

Tunneling recombination in spatially inhomogeneous structures

Methods for finding the parameters (energies and capture coefficients for electrons and holes) of the levels involved in the formation of the recombination flux are suggested. The temperature variation of these parameters for AlGaN/InGaN/GaN and InGaN/SiC structures is discussed. The parameters of the levels responsible for tunneling recombination are determined.     

On Striping Traffic over Multiple IEEE 802.11(b) Wireless Channels

Due to interference, path loss, multipath fading, background noise, and many other factors, wireless communication normally cannot provide a wireless link with both a high data rate and a long transmission range. To address this problem, striping network traffic in parallel over multiple lower-data-rate but longer-transmission-range wireless channels may be used. In this paper, we propose a new striping method and evaluate its performances over multiple IEEE 802.11(b) channels under various conditions. Our extensive simulation results show that this method is quite effective for such an application. S.Y. Wang is an Associate Professor of the Department of Computer Science and Information Engineering at National Chiao Tung University, Taiwan. He received his Master and Ph.D. degree in computer science from Harvard University in 1997 and 1999, respectively. His research interests include wireless networks, Internet technologies, network simulations, and operating systems. He is the author of the NCTUns 2.0 network simulator and emulator, which is being widely used by network and communication researchers. More information about the tool is available at http://NSL.csie.nctu.edu.tw/nctuns.html. C.H. Hwang received his master degree in computer science from NCTU in 2002 and currently is working for a network company. C.L. Chou currently is a third-year Ph.D. student at the Department of Computer Science and Information Engineering, National Chiao TungUniversity (NCTU), Taiwan. He received his master degree in computer science from NCTU in 2002.     

Photoreactivation of Escherichia coli following medium-pressure ultraviolet disinfection and its control using chloramination.

Ultraviolet (UV) disinfection is becoming increasingly popular as an alternative disinfection technology to chlorination in recent years. In this study, we investigated the photoreactivation of Escherichia coli following medium-pressure (MP) UV disinfection of synthetic water by a bench-scale collimated beam apparatus. The UV doses ranged from 1.6 -19.7 mWs/cm2 and photoreactivation was investigated for 6 hours under fluorescent light. In addition, chloramination was applied after UV disinfection to investigate its ability to control photoreactivation. It was found that photoreactivation occurred for all UV doses tested and the increase in bacteria numbers ranged from 0.04 to 1.35 log10. However, the degree of photoreactivation decreased with increased UV doses. Chloramination experiments revealed that the addition of 0.5 mg/l of monochloramine resulted in suppression of photoreactivation for 1 hour only. An increased monochloramine dose of 1 mg/l was found to prevent photoreactivation for the entire duration of the experiment. The results of this study have shown that photoreactivation occurs even after MP UV disinfection, although it is of a lesser extent at higher UV doses. This study has also established that secondary chloramination can effectively suppress and eliminate photoreactivation with a chloramine dose of 1 mg/l.     

Mathematical modeling of high-frequency electromagnetic heating of the bottom-hole area of horizontal oil wells

The results of theoretical investigations of the possibility of using intense high-frequency electromagnetic radiation in fields of high-viscosity oils with the aim of intensifying their production have been given. Expressions of the distribution of the electromagnetic field strength and the field of heat sources occurring in an oil bed under the action of high-frequency electromagnetic radiation transferred to the bed through a horizontal well have been obtained. A two-dimensional mathematical model of the process of production of oil through horizontal wells with simultaneous high-frequency electromagnetic action has been developed. The efficiency and profitableness of the method from the viewpoint of the energy balance have been evaluated.Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 77, No. 6, pp. 105–111, November–December, 2004.     

Pin&Play: the surface as network medium

Integrating appliances in the home through a wired network often proves to be impractical: routing cables is usually difficult, changing the network structure afterward even more so, and portable devices can only be connected at fixed connection points. Wireless networks are not the answer either: batteries have to be regularly replaced or changed, and what they add to the device's size and weight might be disproportionate for smaller appliances. In Pin&Play, we explore a design space in between typical wired and wireless networks, investigating the use of surfaces to network objects that are attached to it. This article gives an overview of the network model, and describes functioning prototypes that were built as a proof of concept.