An electrooptic intensity modulator with improved linearity

A highly linear electrooptic modulator has been designed, fabricated, and evaluated. The design of this modulator consists of only a simple modification to the directional coupler. Two-tone testing has demonstrated that, for an optical modulation depth of 30% per channel, the third-order intermodulation distortion is more than 30 dB lower than that of the conventional directional coupler or Mach-Zehnder modulators. This improvement was not observed to be accompanied by any increase in second harmonic distortion. Also included are results of two-tone computer simulations which predict the improvement in linearity of this device for a range of modulation depths.<>     

Transcutaneous balloon angioplasty in the treatment of subclavian steal syndrome. Characteristics of vertebral basal flow with transcranial Doppler technique

Subclavian steal syndrome (SSS) appears when the origin of the subclavian artery (SA) is occluded or stenosed. Introduction of transcranial Doppler sonography (TCD) provided an opportunity to evaluate parameters of the blood flow in the vertebral (VA) and basilar artery (BA). Measurements of blood flow velocities performed at rest and after the brachial hyperemia test allow one to classify hemodynamic types of SSS. The aim of the study was to categorize types of steal and to compare the differences of flow patterns before and after percutaneous transluminal SA balloon angioplasty (SA-PTA). Fourty-eight patients with angiographically confirmed SSS (aged from 27 to 68 years, mean 53; 2/1 f/m ratio) were examined with 2 MHz range-gated, pulsed transcranial Doppler device (TC 2-64B EME). Both VA and BA were evaluated by the transoccipital approach at rest and during the brachial hyperemia. In 5 cases (10.4%) permanent reversal blood flow in the BA was observed (complete basilar steal). In flow in the BA blood flow was in the normal direction at rest and altered (reversed or decreased) when induced with brachial hyperemia test (transient basilar steal). In the next 14 patients (29.2%) permanently reversed VA blood flow was observed with only a slight or no alterations of the BA flow after the hyperemia test (complete vertebral steal). In the last 19 cases (39.6%) alterations of the VA blood flow without changes in BA flow were observed (latent vertebral steal). Between 1991 and 1994 twenty seven symptomatic patients with different hemodynamic types of SSS were treated with SA-PTA. TCD evaluation of VA's and BA using the hyperemia test was performed before, 3 to 7 days and 3 months after morphologically and hemodynamically successful subclavian artery balloon PTA. Normal results of vertebrobasilar examinations were obtained in 26 cases after this procedure. In one case the latent vertebral steal was detected. The 28 months mean follow-up revealed no significant changes in TCD flow patterns recorded from VA's and BA. After collecting data of about 60 patients with SSS we examined with TCD we conclude that: in patients with a hemodynamically significant SA stenosis the presence of reversed ipsilateral VA blood flow (a radiologic steal) its not a good determinant of either the presence or type of presenting symptoms and after successful PTA or recanalisation and PTA of SA in almost all cases we examined close to normal TCD recordings in BA and VA.     

Fibrous carbon materials having a protective oxidation resistant coating

Conclusions -- A gas-phase method of depositing one- or multiple-component carbide coatings on CFM of various textile structures has been developed. With preservation of the strength and elastic characteristics of the CFM, the thermo-oxidative resistance of the material is increased, plus the temperature range for the decomposition is shifted into the higher temperature region — by 150–250°C as compared with the starting material.-- CFM with protective coatings are finding ever greater use in making filters for cleaning up high-temperature gas-air mixtures.VNIIPV. Translated from Khimicheskie Volokna, No. 3, pp. 47–48, May–June, 1991.     

Off-line quality control for V-process castings

In the present work Taguchi's approach has been applied to the V-process castings of Al-11 per cent Si alloy to acertain the most influential control factors which will provide better and consistent surface finish to the castings regardless of the noise factors present. The control factors of the V-process that may affect the quality of the castings are the molding sand, vibration frequency, vibrating time, degree of vacuum imposed, and pouring temperature. In order to understand how these factors affect the surface roughness of the V-process castings, response surface methodology has been applied, and to obtain the optimal setting of the control factors Taguchi's method has been used. It is found that the pouring temperature has a significant effect on the surface roughness of Al-11 per cent Si alloy castings made by a V-process. Thus the pouring temperature must be kept at the lower level. All other factors are insignificant. Therefore, any setting of the insignificant factors/variables that give the minimum cost can be used.     

Potentiodynamic Studies of the Anodic Behavior of Zn–Ni Alloys Electroplated from Acetate–Chloride Baths

The potentiodynamic anodic behavior of zinc, nickel, and their alloy is studied depending on the compositions of both the electrolyte for dissolution and electroplates to be dissolved. Zinc deposits are indifferent to the presence of chloride ions in solutions. However, the latter ions strongly affect the anodic behavior of Ni and Zn–Ni alloy. The curves of increasing the polarization of the alloys containing more than 70% Ni demonstrate peaks corresponding to the dissolution of both the Zn–Ni solid solution in a range from –0.2 to +0.2 V and nickel in a range from 0.6 to 0.9 V. For alloys containing less than 31% Ni, no peak of its anodic dissolution is observed, because all Ni is bound with Zn.     

Influence of plasma properties on ARC discharge destabilization

The influence of heat transfer processes in arc discharges on the development of thermal instability is considered. A substantial dependence of the process of destabilization on the plasma properties is shown by the example of argon and helium arcs. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 70, No. 1, pp. 93–98, January–February, 1997.     

Spontaneous erythroid colony formation as the clue to an underlying myeloproliferative disorder in patients with Budd-Chiari syndrome or portal vein thrombosis

Results from this laboratory have shown that bone metabolism is directly related to extracellular pH and that high concentrations of tobramycin released from impregnated polymethylmethacryrate (PMMA) beads has pH-dependent toxic effects on bone. In the present study, beneficial effects of calcium hydroxide-impregnated PMMA were investigated regarding tobramycin toxicity and bone metabolism in chick embryo tibiae in vitro. Also using Ca(OH)2 as a pH regulator, the antibiotic efficacy of tobramycin-impregnated PMMA was evaluated with respect to inhibition of Staphylococcus aureus growth. When Ca(OH)2 was added to PMMA beads containing tobramycin, the beads released hydroxyl and calcium ions into the culture medium and released more antibiotic than beads containing only tobramycin. Bone metabolism (glycolysis, total protein synthesis, and collagen synthesis) was enhanced by Ca(OH)2-impregnated beads with or without tobramycin. Additionally, bacterial growth was inhibited more strongly when S. aureus was incubated with tobramycin- and Ca(OH)2-impregnated PMMA disks than with disks containing only tobramycin. This study demonstrates the feasibility of adding Ca(OH)2 to tobramycin-impregnated PMMA beads as a regulator of local pH and a promoter of bone metabolism for protection of bone when high concentrations of tobramycin are used to treat osteomyelitis. It also suggests that lower concentrations of antibiotic may be effective if Ca(OH)2 and tobramycin are administered simultaneously.     

T cells of the human intestinal lamina propria are high producers of interleukin-10

BACKGROUND: The transmission of hepatitis A virus (HAV) has been associated with the use of a number of solvent/detergent-treated factor VIII concentrates and possibly a factor IX concentrate. These reports have emphasized the necessity of using virus-inactivation methods for plasma products that are capable of inactivating nonenveloped viruses such as HAV. STUDY DESIGN AND METHODS: A simple, highly accurate titration procedure for HAV, which allows extensive kinetic investigations of virus-inactivation procedures, has been developed. This system has now been used to evaluate the efficacy of vapor heating in inactivating HAV after the addition of the virus to a range of human plasma products. RESULTS: It was demonstrated that HAV was significantly more thermostable than other picornaviruses, which reinforced the fact that such viruses cannot be used as model viruses for HAV-inactivation studies. A one-step vapor-heating procedure was demonstrated to inactivate between 5.9 and > 6.3 log10 of HAV in different products. A two-step vapor-heating procedure had the capacity to inactivate between > 8.7 and > 10.4 log10 of HAV. Both procedures were more effective in inactivating HAV than was the pasteurization procedure used for virus inactivation in human albumin solutions. CONCLUSION: These data demonstrate the efficacy of vapor heating in inactivating high-titer HAV after the spiking of plasma products with virus. This study confirms and explains the results of controlled clinical trials and long-term clinical usage with respect to the lack of HAV transmission by such vapor-heated products.