Langmuir films of polycyclic molecules on mercury

Langmuir films (LFs) of biphenyl and anthracene derivatives on the surface of liquid mercury were studied by surface-specific X-ray and surface tension measurements. Phases of lying-down, side-lying and standing-up molecules were found, some of which exhibit long-range lateral order. The molecular symmetry and the position and nature of the side-, end-, and headgroups are shown to dominate the structural evolution of the LFs with surface coverage.     

KATRIN NEG pumping concept investigation

The Karlsruhe Tritium Neutrino experiment (KATRIN) is going to use a very large electro-static tandem spectrometer to measure the electron spectrum from the tritium beta decay, where several kilometers of non-evaporable getter (NEG) strips (type ST707) are to be used to achieve the UHV requirements. Different geometrical configurations of the NEG strips have been studied by Monte Carlo simulations. It is shown that the resulting pumping speed of the getter pumps will allow to get a pressure below 10⁻¹¹ mbar in the huge vessel with a volume of 1400 m³. By systematic assessment of the statistics of the pumping surfaces, it could be demonstrated that the design is sound.     

Cointegration of Gate-All-Around MOSFETs and Local Silicon-on-Insulator Optical Waveguides on Bulk Silicon

In this work we present a bulk silicon technology platform able to cointegrate gate-all-around (GAA) MOSFETs and local SOI waveguides with pentagonal cross section. Wire diagonals of 100-800 nm are obtained using a lithographic resolution of 0.8 mum. Well-functioning triangular multigate MOSFETs are reported, and tested up to 150 degC. A significant increase is observed in the low-field mobility mu₀ for small devices (W_effles500 nm), which is attributed to local volume inversion in the corners. Preliminary characterization of the optical waveguides is carried out, showing optical losses of a few dB/cm. The processing is entirely CMOS compatible, does not require access to advanced lithography equipment, and is based on a silicon bulk substrate. Thus, this technology might serve as the basis for a low-cost, high-performance optical signaling platform     

Model for Nanoscopic Domain Formation in Dipalmitoyl-PC/Dilauroyl-PC/Cholesterol Mixture

We describe the lyotropic liquid crystalline phase transitions in the lipid mixture dipalmitoil-PC/dilauroy-PC/cholesterol by 3D spin-1 lattice model. The formation of nanoscale domains with the characteristic size about 300 nm was studied in experiments on confocal fluorescence microscopy (CFM) (G. V. Feigenson and J. T. Buboltz, Biophys. J. 80, 2775 (2001)). The structure parameters of the lamellar vesicle in dipalmitoil-PC-rich phase, corresponding to these regions, are verified by numerical Monte Carlo simulations on the lattice. We point its superconductivity analogy properties at the region of phase stability for composition-dependent nanoscopic region.     

Anomalous Hall and Nernst Effects in Normal State of SC Cuprates

It is demonstrated that scattering of mobile charge carriers by fluctuations of local spin density in the normal state of SC-cuprates results in anomalous contribution to the transport phenomena (Hall and Nernst effects are included). Depending on their sign and magnitude, they can change value and sign of the corresponding effect measured.     

Controlling the Critical Temperature in Mg1−x Al x B2

Here we report synthesis and characterization of high quality samples of the superconducting system Mg_1−x Al _x B₂, with a novel optimized preparation method, in a wide range of Al concentration. All the physical properties of the samples can be tuned continuously with increasing Al content. We have characterized the samples for their structural, morphological and magnetic properties with high resolution XRD, SEM-EDS and susceptibility measurements. We have prepared a large number of Al doped MgB₂ in the range 0<x<0.57. All the samples are bulk superconductors and the critical temperature show a smooth and regular behavior as a function of x. This work was supported by European project 517039 “Controlling Mesoscopic Phase Separation” (COMEPHS) (2005). An erratum to this article can be found at     

A Novel Inverse-Magnetostrictive Force Sensor

The change in magnetic permeability of a material under stress (inverse magnetostriction) offers the potential for a high-performance, low-cost force sensor capable of being used in harsh real-world environments. The existing force sensor technologies are limited in their use in commercial products by either cost issues or susceptibility to electromagnetic noise. Inverse Magnetostriction has been used to measure strain in controlled environments since its discovery by Joule in 1847, but not in practical applications due to a lack of data on how magnetic material properties change with environmental conditions such as temperature. Utilizing an innovative noise-reducing self-inductance design, this paper presents the basis for an inverse-magnetostrictive compressive load sensor. A lumped-parameter model for the change in sensor inductance under load, due to both mechanical and magnetic effects, is derived. The material properties of a magnetostrictive iron alloy are empirically determined over a broad range of loads and temperatures. The model and material properties are confirmed by testing a prototype force sensor. The prototype measures compressive forces from 100 to 25 000 N over a temperature range of 20 degC to 120 deg with a typical error of +/-2% (4% max). The sensor does experience significant thermal hysteresis for which the model does not currently account. This work was motivated by the need for a force sensor in an automobile electric brake system and used a single iron alloy (50% Ni), but the model and testing procedure provide a roadmap for future research to improve the performance and capabilities of such a sensor     

Interlaboratory ring test of time-resolved fluoroimmunoassays for zeranol and alpha-zearalenol and comparison with zeranol test kits.

Many zeranol immunoassay test kits cross-react with toxins formed by naturally occurring Fusarium spp. fungi, leading to false-positive screening results. This paper describes the evaluation and application of recently published, dry reagent time-resolved fluoroimmunoassays (TR-FIA) for zeranol and the toxin alpha-zearalenol. A ring test of bovine urine fortified with zeranol and/or alpha-zearalenol in four European Union National Reference Laboratories demonstrated that the TR-FIA tests were accurate and robust. The alpha-zearalenol TR-FIA satisfactorily quantified alpha-zearalenol in urine fortified at 10-30 ng ml(-1). The specificity-enhanced zeranol TR-FIA accurately quantified zeranol in the range 2-5 ng ml(-1) and gave no false-positive results in blank urine, even in the presence of 30 ng ml(-1) alpha-zearalenol. Zeranol TR-FIA specificity was demonstrated further by analysing incurred zeranol-free urine samples containing natural Fusarium spp. toxins. The TR-FIA yielded no false-positive results in the presence of up to 22 ng ml(-1) toxins. The performance of four commercially available zeranol immunoassay test kits was more variable. Three kits produced many false-positive results. One kit produced only one potential false-positive using a protocol that was longer than that of the TR-FIA. These TR-FIAs will be valuable tools to develop inspection criteria to distinguish illegal zeranol abuse from contamination arising from in vivo metabolism of Fusarium spp. toxins.