Successful Aging

This issue's Works in Progress department presents six abstracts for projects that are developing interesting solutions to the elderly's quality of life challenges. The first two abstracts discuss projects that will help provide the elderly with freedom and independence by instrumenting their environments with supportive technology. The next two abstracts discuss projects building specialized user interfaces for addressing some of the challenges associated with aging, such as vision impairment. The final two abstracts present projects that will aid independence for the elderly by providing remote monitoring and assistance.     

立方相GaN的持续光电导

研究了金属有机物化学气相外延 (MOVPE)方法生长的非故意掺杂的立方相 Ga N的持续光电导效应 .在六方相 Ga N中普遍认为持续光电导效应与黄光发射有关 ,而实验则显示在立方 Ga N中 ,持续光电导效应与其中的六方相 Ga N夹杂有关系 ,而与黄光发射没有关系 .文中提出 ,立方相 Ga N与其中的六方相 Ga N夹杂之间的势垒引起的空间载流子分离是导致持续光电导现象的物理原因 .通过建立势垒限制复合模型 ,解释了立方相 Ga N的持续光电导现象的物理过程 ,并对光电导衰减过程的动力学作了分析 .对实验数据拟合的结果证明以上的模型和推导是与实验相符的 .     

Noise modeling for RF CMOS circuit simulation

The RF noise in 0.18-/spl mu/m CMOS technology has been measured and modeled. In contrast to some other groups, we find only a moderate enhancement of the drain current noise for short-channel MOSFETs. The gate current noise on the other hand is more significantly enhanced, which is explained by the effects of the gate resistance. The experimental results are modeled with a nonquasi-static RF model, based on channel segmentation, which is capable of predicting both drain and gate current noise accurately. Experimental evidence is shown for two additional noise mechanisms: 1) avalanche noise associated with the avalanche current from drain to bulk and 2) shot noise in the direct-tunneling gate leakage current. Additionally, we show low-frequency noise measurements, which strongly point toward an explanation of the 1/f noise based on carrier trapping, not only in n-channel MOSFETs, but also in p-channel MOSFETs.     

A low phase noise silicon 18-GHz push-push VCO

The design and measurement of a push-push voltage controlled oscillator (VCO) at 18.66-18.3 GHz are presented in this paper. The circuit includes two packaged silicon transistors (Siemens BFP 540F) and a microstrip resonator tuned by two GaAs varactor diodes (M/A-COM ML46580). A 360-MHz tuning range is obtained with an output power of 0-3.1 dBm. The fundamental rejection is around 17 dB for a wide range of collector bias current. The phase noise is below -103 dBc/Hz at 100-kHz offset and below -122 dBc/Hz at 1 MHz for the entire tuning bandwidth.     

Deep‐UV Photochemistry and Patterning of (Aminoethylaminomethyl)phenethylsiloxane Self‐Assembled Monolayers

The 193 nm photochemistry of (aminoethylaminomethyl)phenethylsiloxane (PEDA) self‐assembled monolayers (SAMs) under ambient conditions is described. The primary photodegradation pathways at low exposure doses (< 100 mJ cm^–2) are benzylic C–N bond cleavage (ca. 68 %), with oxidation of the benzyl C to the aldehyde, and Si–C bond cleavage (ca. 32 %). Amine‐containing photoproducts released from the SAM during exposure remain physisorbed on the surface, where they undergo secondary photolysis leading to their complete degradation and removal after ca. 1200 mJ cm^–2. NaCl(aq) post‐exposure rinsing removes the physisorbed materials, showing that degradation of the original PEDA species (leaving Si–OH) is substantially complete after ca. 450 mJ cm^–2. Consequently, patterned, rinsed PEDA SAMs function as efficient templates for fabrication of high‐resolution, negative‐tone, electroless metal and DNA features with good selectivity at low dose (i.e., ca. 400 mJ cm^–2) via materials grafting to the intact amines remaining in the unirradiated PEDA SAM regions.     

High optical power electroabsorption waveguide modulator

A sampled grating distributed Bragg reflector-laser integrated with a waveguide Franz-Keldysh modulator is investigated for high optical power applications. The EAM modulation efficiency is demonstrated to asymptotically approach a limit determined by the internal differential photodetector efficiency. Linear photocurrent and 1 dB small signal AC compression point both exceed 70 mA, indicating high saturation power.     

A model material approach to the study of fracture process zone of quasi-brittle materials

A new approach to study the fracture of quasi-brittle materials is introduced: the design and testing of model materials. By model material is understood a material with enlarged microstructure and which material parameters, such as stacking and mechanical properties of particles and cohesion force, can be fully controlled. In this paper a first example to the model materials approach is presented, consisting in 5 mm steel particles bonded in a precise stacking with an epoxy-based glue. It is shown how it is possible to correlate the different fracture mechanisms and ultimate peak load of the model material to the particle pair force and to the fracture process zone size. It is also seen how a quasi-brittle behaviour is produced in the presence of mechanisms that induced the crack to shift fracture planes, that is, in presence of energy dissipative mechanisms.     

Creep of PVDF monofilament sutures: service performance prediction from short-term tests

Isothermal short-term creep of poly (vinylidene fluoride) (PVDF) monofilament sutures was determined at several temperatures between 10 and 90 °C under the stress of 10 MPa. Long term service performance was predicted for 10 decades of time. The compliance master curve as a function of time fits a hyperbolic sine equation. The temperature shift factor as a function of the temperature a_T (T) is accurately represented by a general equation based on free volume. A simple relationship between the two parameters of the equation is explored. The viscoelasticity of PVDF is also seen in dynamic mechanical analysis performed at the frequency of 1 Hz. The origin of the viscoelastic character well present in the deformability of the PVDF in service is due to the occurrence of the α_c relaxation that is active at ∼50 °C (E″ peak at 1 Hz).     

Enhance Cyanide Recovery by UsingAir‐Sparged Hydrocyclone

Human health and environmental concerns dictate that industrial processes be improved or replaced. Recovery or recycling is an important activity that allows cyanide residue from the industrial processes to be re‐used, reducing its production cost and disposal problems. In this regard, the air‐sparged hydrocyclone (ASH) has been used as a reactor for the treatment of cyanide solutions for cyanide recycling by acidification/volatilization using the Mexican modification of the Mills‐Crowe process. Aqueous cyanide‐ion concentration can be reduced from 250 ppm to below 20 ppm in the ASH with recoveries greater than 80 % in a single stage.