Particle-size distribution and phosphorus levels in soil, sediment, and urban dust and dirt samples from the Menomonee River Watershed, Wisconsin, U.S.A.

Soil, bottom sediment, suspended sediment, and urban street dust and dirt samples from the Menomonee River Watershed, Wisconsin, were dispersed by ultrasound, fractionated and analyzed for the P content of each of three particle-size fractions. The major soil types in the watershed were used as a reference for comparing particle-size distribution and P content in urban street dust and dirt, and in sediments.Phosphorus level was found to be greater in the clay-sized particles than in the sand- or silt-sized particles of urban street dust and dirt samples, but 48% of the P was in the sand-sized fraction because of the predominance of sand-sized particles in these samples. The highest P level in the clay-sized fraction of the bottom sediments occurred at the site below a sanitary treatment plant (STP) outfall with secondary treatment capability. The P level found below a tertiary STP outfall was equal to the level found in agricultural areas. When using P level in sediment for locating areas of possible P input to the river, the clay-sized fraction of bottom sediments was more precise than P levels in unfractionated samples.     

A framework for rapid local area modeling for construction automation

Rapid 3D positioning and modeling in construction can be used to more effectively plan, visualize, and communicate operations before execution. It can also help to optimize equipment operations, significantly improve safety, and enhance a remote operator's spatial perception of the workspace. A new framework for rapid local area sensing and 3D modeling for better planning and control of construction equipment operation is described and demonstrated. By combining human-assisted graphical workspace modeling with pre-stored Computer-Aided Design (CAD) models and simple sensors (such as single-axis laser rangefinders and remote video cameras), modeling time can be significantly reduced while potentially increasing modeling accuracy.     

Mobilization of lead from human bone tissue during pregnancy and lactation--a summary of long-term research

The skeleton is potential endogenous source of lead during pregnancy and lactation. We have undertaken a longitudinal investigation into the mobilization of lead from the human maternal skeleton to determine whether lead is mobilized from the maternal skeleton during pregnancy and lactation, and if so, when and how much is released. Subjects in the study were migrants to Australia (n=15) whose skeletal lead isotopic composition (endogenous lead) was different to that prevailing in the Australian environment (exogenous lead). This migrant cohort was compared with 6 multi-generational Australian controls. Biological and environmental samples were taken pre-pregnancy where possible, throughout pregnancy and postpartum for at least 6 months. Newly-born infants of the migrant and Australian mothers were monitored for 6 months. Blood lead concentrations for the migrant mothers ranged from 1.5 to 20 microg/dl (geometric mean 2.8) and for Australian mothers ranged from 1.9 to 4.3 microg/dl (geometric mean 2.9). There was minimal change in lead isotopic composition of the Australian pregnant controls although there were increases of approximately 40% in blood lead concentration in 3 of 6 cases during the postpartum period and from 0 to 12% in the other 3. In the migrant pregnant subjects, the geometric mean skeletal lead contribution to blood lead using the isotopic composition was approximately 33% (range 10-88%) for 14 subjects using a revised estimate for exogenous lead. Skeletal contribution to blood lead during the postpartum period was significantly greater than during pregnancy (P<0.001). The skeletal contributions to blood lead are higher and the changes are more consistent in those subjects who conceived within 100 days of arrival in Australia compared with those who conceived longer than 100 days. In the migrant subjects, changes in blood lead concentration during pregnancy and postpartum varied from subject to subject with an overall 20% increase; the increases during the postpartum period were greater than during pregnancy (P<0.001). It was estimated that the amount of maternal skeletal lead mobilized during pregnancy and transferred to the infant via cord blood averaged approximately 79%. The increased skeletal contribution to blood lead is attributed to a low daily calcium intake of approximately 500 mgCa/day, a condition which was present in both migrant and Australian subjects. An ongoing clinical trial is providing a new cohort with calcium supplements. A summary of other aspects of the study is included and covers: additional flux released from the skeleton during pregnancy and postpartum; XRF bone lead results; urinary excretion of lead during pregnancy and postpartum; dietary contribution to blood lead in female adults and children; comparison of rates of exchange of lead in blood of newly-born infants and mothers; relationships of lead in breast milk to lead in blood, urine and diet of the infant and mother; changes in blood lead after cessation of breastfeeding; urinary lead isotopes during pregnancy and postpartum indicate no preferential partitioning of endogenous lead into plasma; a comparison of some aspects of the nonhuman primate and human pregnancy studies.     

The use of roughness to produce high reynolds number flows around circular cylinders at lower reynolds numbers

It has long been stated that the pressure distribution around a circular cylinder at high values of Reynolds number can be reproduced at lower values of Reynolds number by a suitable roughening of the surface of the cylinder. This paper shows that this is indeed possible and explains the problems.     

Full scale fire tests for ship accommodation quarters

Ten full-scale test fires were conducted in a chamber simulating a three person ship accommodation quarter. The test fires used three different ventilation conditions, two types of bunks and furnishings with either polyurethane foam or chloroprene foam. The chamber was instrumented to follow the development of the fire.The furnishings with polyurethane foam were readily ignited and produced an intense fire within 2 to 4 minutes. The furnishings with chloroprene foam ignited but burned slowly with a small flame or in smoldering combustion.The ventilation conditions had a significant effect on the development and intensity of the fire as the test fires were burning under oxygen-limiting conditions.The solid pan bunks retarded the early development of the fire compared to open bunks for polyurethane furnishings. However, once the mattresses on the three bunks were ignited the intensity of the test fires was similar for both types of bunks.     

Finite element modelling of plate girders with web openings

This paper is concerned with a finite element model to predict the behaviour and ultimate load of plate girders with web openings. The finite element package is used to model the plate girders with web openings. Accuracy of the model is assessed by applying it to plate girders tested earlier by other researchers. Comparison of analytical results with the available experimental results for yielding patterns, ultimate load values and load–deflection relationships show good agreement between the finite element and experimental results thus validating the accuracy of the proposed model. The proposed finite element method was extended to carry out a parametric study. The study covered parameters such as web slenderness and flange stiffness.     

Protocatechuic acid ozonation in aqueous solutions

The oxidation of protocatechuic acid with ozone in aqueous solution has been studied varying the temperature, pH, ozone partial pressure and initial acid concentration. A stoichiometric ratio of 2 mol of ozone consumed per mol of protocatechuic acid reacted is deduced from homogeneous experiments in a discontinuous tank reactor.In the ozonation experiments, the influence of the operating variables was established and the kinetic regime of ozone absorption was shown to be fast and pseudo m-order with respect to ozone, except at pH 2, when the reaction develops in the moderate kinetic regime. After applying a mass transfer with chemical reaction model, the reaction orders are deduced and the kinetic rate constants are determined as a function of pH and temperature. A modified Arrhenius expression is proposed to correlate them.     

Compartment tests of polyurethane foam seating assemblies

Data from compartment tests of polyurethane foam seating assemblies are reported. Results show that the behavior of such assemblies during fires is strongly dependent on the type and position of interliners and upholstery fabrics. An incidental comparison of peak rate of heat release obtained in a compartment test with a predictive model equation is made and selected data from the tests are presented.     

Oxygen transfer in a rotating disc treatment plant

In this paper experiments are described in a bio-disc pilot plant. A new method has been developed for a reproducible measurement of the thickness of the waterfilm on the rotating discs. The results were used to calculate the oxygen transfer coefficient into water (K_L). The values of K_L, calculated in this way, appeared to be considerably higher than experimental K_L-values, which is mainly due to the fact that the water layer on the rotating disc is outdistanced by the disc. This effect has not been taken into account in the literature so far.