Morphine enhancement of sucrose palatability: analysis by the taste reactivity test

The ability of morphine to modify sucrose palatability was assessed by the taste reactivity test. In Experiment 1, rats were injected with morphine (0.0, 0.5, 2.0, and 10.0 mg/kg, subcutaneously), 30 min before receiving a 10-min intraoral infusion of 2% or 20% sucrose solution. A dose of 2.0 mg/kg morphine enhanced ingestive reactions elicited by both concentrations of sucrose solution. In Experiment 2, the interval between morphine pretreatment and the taste reactivity test was manipulated. Rats given 2.0 mg/kg morphine 30 or 120 min before testing displayed enhanced ingestive reactions elicited by 20% sucrose solution during the first 5 min of a 10-min test. The results support the hypothesis that morphine enhances the hedonic assessment of sucrose solution.     

Antithrombotic potency of hirudin is increased in nonhuman primates by fibrin targeting

BACKGROUND: Inhibition of thrombin by either the indirect thrombin inhibitor heparin or by more potent direct thrombin inhibitors such as hirudin reduces thrombus formation after arterial injury. The present study was designed to determine if a fibrin-specific thrombin inhibitor could, by local thrombin inhibition, prevent thrombosis more effectively. METHODS AND RESULTS: We first studied antithrombotic potency in vitro, comparing fibrin-targeted hirudin (recombinant hirudin covalently linked to the Fab' fragment of the anti-fibrin monoclonal antibody 59D8) to recombinant hirudin in baboon plasma. Fibrin-targeted hirudin was nine times more effective than recombinant hirudin in inhibiting fibrin deposition on experimental clot surfaces in baboon plasma (P < .01). The potency of fibrin-targeted hirudin was then compared with that of recombinant hirudin in a baboon model of thrombus formation. 111In-labeled platelet deposition was measured in a synthetic graft segment of an extracorporeal arteriovenous shunt in control animals and in animals receiving either fibrin-targeted hirudin or hirudin. In these experiments, fibrin-targeted hirudin was 10-fold more potent than hirudin in inhibiting platelet deposition and thrombus formation (P < .05). CONCLUSIONS: These data indicate that targeting a thrombin inhibitors such as hirudin to an epitope present in thrombi results in increased antithrombotic potency.     

基于双电容耦合的发电机局部放电离线式测量新方法

对发电机绝缘局部放电量的测量是考核其绝缘状况的重要手段,但传统的测量方法由于受到试验现场的强电磁干扰,常常无法进行有效的测量,因而难以对发电机的绝缘状况做出准确的判断.本文提出了一种基于双电容耦合的发电机局部放电离线式测量新方法,通过设计两个电容的耦合性能及其传递过来的信号时差关系,可以有效地将发电机外的放电信号以及其他各类干扰信号予以消除,因而具有很强的抗干扰能力.现场的实际试验表明,该方法不仅使发电机的局部放电测量易于进行,还大大提高了发电机局部放电测量的准确度.     

新型智能管套内部电场分析及尺寸优化

分压屏对套管内部电场分布存在一定程度的影响,尤其在分压屏极板两端的电场容易产生畸变,给套管的安全稳定运行带来一定隐患。针对此,通过插值拟合的方式,建立分压屏极板边缘电场强度与极板尺寸之间的函数关系,并根据该函数关系优化分压屏极板尺寸,使套管内部电场分布尽量均匀、合理。采用大型有限元计算软件Ansys对套管内部电场进行仿真计算,结果表明,分压屏极板的位置及尺寸优化后能够满足要求,可使套管内部最大电场强度值降低45％,并有效改善分压屏极板两端的电场畸变问题。     

Ｐｅｃｈｉｎｉ法制备Ｂｉ２Ｓｒ２ＣａＣｕ２Ｏ８＋δ粉体的工艺优化及表征

以硝酸盐为原料,乙二胺四乙酸（ＥＤＴＡ）为络合剂,乙烯乙二醇为交联剂,利用Ｐｅｃｈｉｎｉ法制备了名义组分为Ｂｉ_２Ｓｒ_２ＣａＣｕ_２Ｏ_８＋δ（Ｂｉ－２２１２）超导粉体。通过Ｘ射线衍射（ＸＲＤ）、标准四引线法等手段,研究了络合剂、交联剂用量及油浴温度、时间对超导粉体物相、结晶性及电学性能的影响。实验结果表明：不同凝胶化条件制备的超导粉体,均保持较高的相纯度;但工艺参数的改变对Ｂｉ－２２１２粉体的结晶性与电学性能影响显著,其临界转变温度Ｔ_ｃ,０相差７．３Ｋ。     

聚乙烯醇/聚二甲基二乙烯氯化铵阴离子自立交换膜的制备与性能

以5种不同聚乙烯醇/聚二甲基二乙烯氯化铵配比制备了用于电透析脱盐的阴离子自立交换膜,并考察3种不同热处理温度对膜含水率、膜电荷密度、真实迁移数及膜面电阻的影响。实验结果表明:膜的含水率随聚二甲基二乙烯氯化铵含量CPC的增加而增加,随热处理温度的增加而降低;在CPC为30 wt%,热处理温度为180℃时,阴离子交换膜的膜面电阻最低,为3.04Ωcm2;在CPC为30 wt%,热处理温度为180℃时,阴离子交换膜的真实迁移数达到0.99;在CPC为20 wt%,热处理温度为180℃时,阴离子交换膜的膜电荷密度值为1.14 mol dm-3。     

油纸绝缘状态评价模型的改进(英文)

Identification of the aging condition and the failure probability of oil-paper insulation in transformer is important for improving the reliability of electric power transmission system and applying life cycle cost (LCC) management to electrical equipment. Based on data obtained in a series of multi-accelerated-aging experiments, two approaches for calculating failure probability of oil-paper insulation were compared in aspects of degree of polymerization (DP) and condition ranking. In the experiments, mineral oil and cellulose paper are sub- jected to electrical and thermal stresses, and several parameters, including dissolved gases’ volume fraction, furfural content, moisture content, and degree of polymerization, are measured after the aging process. Results show that weight of carbon oxide, which has a close relationship with cellulose paper degradation, is much higher in DP model than in condition ranking model. Moreover, it is concluded that DP model is more practically accurate than condition ranking model, because aging of cellulose paper rather than mineral oil is the key and critical factor of oil-paper insulation aging.     

Some results on the improvement of adaptation transients

A technique to improve the adaptation transient in discrete-time model reference adaptive control (MRAC) systems is given on the basis of applying classical optimization techniques to an equivalent near-linear system to the whole adaptive scheme. The resulting optimization is finally translated into modifications of one of the parameters entering the adaptation algorithm. This permits computation of a posteriori values of the adaptive controller parameters before generation of the input to the plant.     

Action of heavy metal salts on the development of sea urchin embryos and on protein synthesis by the cells of transplantable mouse tumors

Zu, Cu, Cd, Pb and Hg salts blocked the cleavage divisions in the sea urchin embryos and, in lesser concentrations, affected gastrulation and induced postgastrulation defects. The early embryo- and cytotoxic effects of Zn salts appear to be based on the inhibition of protein synthesis. Unithiol exerted a protective effect. All salts under study inhibited protein synthesis in the Ehrlich's ascite carcinoma and ascite hepatoma 22a cells; unithiol and other suldhydryl compounds exerted in this case a good protective effect against Cd salts only.     

Stability analysis of PWM feedback control systems with PID regulators

Stability analysis is of great significance in those feedback control systems in which the power amplifier is operated as a pulse-modulator device, since under these circumstances the whole control system is highly non-linear. Stability in PWM feedback control systems with a proportional type regulator has been amply described in the literature. Only recently, however, have such studies been extended to include systems with a proportional-plus-integral regulator. In this paper the problem is considered for the case involving a PWM control system, where the regulator is a proportional-plus-integral-plus-derivative, the PWM modulator is of a very general type and the controlled process is of arbitrary order. The stability of the system is analysed by means of a discrete version of the second Lyapunov method ; this method in turn leads to an investigation of the positivity region of a quadratic form defined in the parameter space of the regulator. To improve the stability region obtained, a procedure is investigated whereby only a few parameters of the quadratic Lyapunov function need to be varied. The method proposed has proved extremely simple and flexible to apply, even in cases where the system is of arbitrary order.