Relationship of passive cigarette-smoking to sudden infant death syndrome

The smoking habits of 56 families who lost babies to the sudden infant death syndrome (SIDS) were compared to those of 86 control families. A higher proportion of SIDS mothers smoked both during pregnancy (61% vs. 42%) and after their babies were born (59% vs. 37%). SIDS mother also smoked a significantly greater number of cigarettes than controls. Exposure to cigarette smoke ("passive smoking") appears to enhance the risk of SIDS for reasons not known.     

The effect of epidural anesthesia on uterine activity and blood pressure

Because of the unresolved controversy regarding the effect of epidural anesthesia upon uterine contractility, it was decided to study its effect on a small number of patients. Intrauterine and intra-arterial continuous pressure, continuous fetal heart rate, and maternal heart rate recordings were obtained from at least 20 minutes before administration of the epidural anesthic until complete dilatation in these patients. Nineteen patients were in spontaneous labor, and 18 had labor stimulated with oxytocin. Plain lidocaine, 1 or 1.5%, was used in 12 patients (30 observations), and lidocaine with epinephrine, 1:200,000 was used in 26 patients (51 observations). Uterine contractions were calculated in Montevideo units for 60 minutes following the epidural anesthetic. The changes, if any, were compared in both groups. There was a significant decrease in uterine activity when epinephrine was added to the anesthetic solution, mainly a lessening of intensity. There were comparable decreases in systolic/diastolic blood pressure in both groups and compensatory tachycardia. In one case, severe hypertension was observed following administration of lidocaine epinephrine. It was concluded that the addition of epinephrine to the anesthetic solution predictably produces diminution of uterine activity, and it does not give "cardiovascular support" to the laboring patient.     

Determination of fibrin and fibrinogen split products by their anticoagulant activity

A new diagnostic method to determine fibrinogen and fibrin splitting products is based on the fact that high-molecular fragments acting as specific inhibitors of fibrin self-assembly compose these products. Fibrinogen and fibrin splitting products are detected and determined quantitatively by prolongation of coagulation time in the test with the standard monomeric fibrin. The number of units of anticoagulating activity in the studied urine are the results of the determinations. Sensitivity of the method if necessary may be increased by adding of a certain amount of the fibrinogen and fibrin splitting products to the test that makes a favourable background for the action of the products. The method is rather sensitive, reliable and simple. It may be used in ordinary clinical laboratories. The method proved to be quite satisfactory when testing renal diseases at the clinic. It is of great significance for early detection of the transplanted kidney rejection. The new method is compared with the known immunological method which consist in determination of the inhibitory effect of the fibrinogen and fibrin splitting products on agglutination of erythrocytes of specific antibodies; the erythrocytes being subjected to "tanning" and "loading" with fibrinogen. A satisfactory correlation is found between the results of two methods.     

Fecal Coliform Removal within a Marshland Upwelling System Consisting of Scatlake Soils

The marshland upwelling system (MUS) was installed on private camps in the Grand Bay National Estuarine Research Reserve, Moss Point, Mississippi. The system was evaluated for its effectiveness in removing fecal coliforms from settled, raw wastewater. A suite of studies was performed at flow rates of 1.9, 2.8, and 5.5 L/min and an injection frequency of 30 min every 3 h to investigate fecal coliform removal. An additional study was performed at a flow rate of 2.8 L/min and an injection frequency of 15 min every hour. Overall, the MUS consistently maintained fecal concentrations below effluent regulatory standards for shellfish harvesting waters (14 most probable number of colonies per 100 mL). Mean influent concentrations of 55,269±2,218,016 colony forming units (CFU)/100 mL were reduced to effluent counts of 2.7±14.07 CFU/100 mL (observed in the 1.5 m wells). Three- to four-log reductions in influent counts were observed over the initial 1.4 vector?m from the injection well. The overall removal followed a first-order decay relationship with respect to vector distance, resulting in removal rate constants ranging from 5.6 to 6.6/m and predicted surface concentrations approaching 0 CFU/100 mL. The 2.8 L/min for 30 min every 3 h treatment provided the best effluent quality.     

Wavelength-swept fiber laser with frequency shifted feedback andresonantly swept intra-cavity acoustooptic tunable filter

This paper concerns a wavelength-swept fiber laser (WSFL) incorporating frequency shifted feedback and an intracavity passband filter, in which the wavelength of the modeless output is linearly, continuously and repeatedly tuned (in time) over a given range by modulation of the filter peak wavelength and filter strength. We show both numerically and experimentally that amplifier noise plays a key role in determining the operation of frequency-shifted fiber laser systems and that a “noisy” amplifier can be used to suppress the natural tendency of such lasers to pulse, allowing for continuous wave, modeless operation. Furthermore, we show that significant narrowing of a WSFL instantaneous swept linewidth can be obtained if the filter peak transmission wavelength is resonantly swept so as to follow the wavelength shift per pass due to the acoustooptic frequency shift. Using these ideas we go on to demonstrate and characterize a high-power diode-driven Er³⁺/Yb³⁺ WSFL incorporating a bulk-optic acoustooptic tunable filter (AOTF). Linewidths as narrow as 9 GHz, sweep ranges up to 38 nm and output powers as high as 100 mW are obtained. Furthermore, we demonstrate the generation of user definable average spectral output by synchronous modulation of the filter strength and multiwavelength pulsed output at higher sweep rates. Excellent agreement between the experimental results and those of the numerical modeling is obtained. Our simulations show that reduced linewidth (<0.02 nm) and improved scan linearity should be readily achievable with realistic system improvements. We believe such sources to be of considerable physical and practical interest, with applications ranging from sensor array monitoring and device characterization through to low-coherence interferometry     

Stability analysis of PWM feedback control systems with PID regulators

Stability analysis is of great significance in those feedback control systems in which the power amplifier is operated as a pulse-modulator device, since under these circumstances the whole control system is highly non-linear. Stability in PWM feedback control systems with a proportional type regulator has been amply described in the literature. Only recently, however, have such studies been extended to include systems with a proportional-plus-integral regulator. In this paper the problem is considered for the case involving a PWM control system, where the regulator is a proportional-plus-integral-plus-derivative, the PWM modulator is of a very general type and the controlled process is of arbitrary order. The stability of the system is analysed by means of a discrete version of the second Lyapunov method ; this method in turn leads to an investigation of the positivity region of a quadratic form defined in the parameter space of the regulator. To improve the stability region obtained, a procedure is investigated whereby only a few parameters of the quadratic Lyapunov function need to be varied. The method proposed has proved extremely simple and flexible to apply, even in cases where the system is of arbitrary order.     

The perceived risk of the Line 5 Pipeline and spills under ice

Using the psychometric paradigm of risk in conjunction with surveys of the Michigan public (n = 638) and a regional planning organization (n = 65), we examine the perceived risk and concerns associated with underwater oil pipelines, the Enbridge Line 5 pipeline in particular, and oil spills under ice. The fate of Line 5 is heavily debated in Michigan, specifically the portion that traverses the Straits of Mackinac, which can be ice-covered for months. Scant literature examines how individuals perceive the risk associated with Line 5, its alternatives, or potential spills in open water or under ice. Here we identify considerable concern regarding both the pipeline and the potential for spills under ice on behalf of the public, and increased concern about spills under ice on behalf of the planning organization. Organization members' concerns are significantly predicted by beliefs about the difficulty in remediating spills, however not by beliefs about spills' likelihood, difficulty in detection, noticeability, or consequences. Our results identify the need to better examine and communicate the risks associated with underwater pipelines and spills, both in open water and under ice, as well as options for remediating oil captured under ice. Furthermore, we recommend the adoption of decision-making and risk governance processes that explicitly expand analysis of the social, economic and environmental tradeoffs of underwater pipelines such as Line 5.     

Imaging and heat flux measurements of wall impinging sprays of hydrocarbons and alcohols in a direct-injection spark-ignition engine

The latest generation of fuel systems for direct-injection spark-ignition engines uses injection nozzles that accommodate a number of holes with various angles in order to offer flexibility in in-cylinder fuel targeting over a range of engine operating conditions. However, the high-injection pressures that are needed for efficient fuel atomisation can lead to deteriorating effects with regards to engine exhaust emissions (e.g. unburned hydrocarbons and particulates) from liquid fuel impingement onto the piston and liner walls. Eliminating such deteriorating effects requires fundamental understanding of in-cylinder spray development processes, taking also into account the diversity of future commercial fuels that can contain significant quantities of bio-components with very different chemical and physical properties to those of typical liquid hydrocarbons. This paper presents high-speed imaging results of spray impingement onto the liner of a direct-injection spark-ignition engine, as well as crank-angle resolved wall heat flux measurements at the observed locations of fuel impingement for detailed characterisation of levels and timing of impingement. The tests were performed in a running engine at 1500 RPM primarily at low load (0.5 bar intake pressure) using 20, 50 and 90 °C engine temperatures. Gasoline, iso-Octane, Butanol, Ethanol and a blend of 10% Ethanol with 90% Gasoline (E10) were used to encompass a range of current and future fuel components for spark-ignition engines. The collected data were analysed to extract mean and standard deviation statistics of spray images and heat flux signals. The results were also interpreted with reference to physical properties and evaporation rates predicted by a single droplet model for all fuels tested.     

Two distinct lithium diffusive species for polymer gel electrolytes containing LiBF4, propylene carbonate (PC) and PVDF

Polymer gel electrolytes have been prepared using lithium tetrafluoroborate (LiBF₄), propylene carbonate (PC) and polyvinylidene fluoride (PVDF) at 20% and 30% concentration by mass. Self diffusion coefficients have been measured using pulse field gradient nuclear magnetic resonance (PFG-NMR) for the cation and anion using ⁷Li and ¹⁹F resonant frequencies respectively. It was found that lithium ion diffusion was slow compared to the much larger fluorine anion likely resulting from a large solvation shell of the lithium. Lithium ion diffusion measurements exhibited two distinct diffusive species, whereas the fluorine ions exhibited only a single diffusive species.     

APPLICATION OF A PERTURBATION THEORY FOR EVALUATION ALGORITHMS FOR IDENTIFICATION OF A CONTINUOUS PLANT FROM DISCRETE DATA

Abstract

A perturbation theory for evaluation algorithms of arithmetic expressions is applied to the generalized least-squares identification of the continuous parameters by using nonperiodic discrete data. The sampling instants are distributed in such a way that a sequence of the elemental arithmetic expressions of the identification algorithm are suboptimized according to bang-bang rules on the extrema of appropriate variation intervals. The weighting scalars in the generalized least-squares method are updated with the same purpose.