Mechanical properties of certain oriented crystalline polymers

The yield stress is a simple function of the deformation ratio in the direction of testing for specimens oriented by uniaxial or biaxial stretching or rolling. Unless the yield stress increases more rapidly than in proportion to the deformation ratio, there will be instability during tensile creep under high loads. The relative merit of various polymers differs for creep and stress relaxation. Fatigue and bend recovery are also related to the molecular structure.     

Multivariate analysis of the correlation between noctuidae subfamilies and the chemical structure of their sex pheromones or male attractants

Female-emitted pheromones and sex attractants of Noctuidae were investigated using a specific computer procedure to analyze data collected from the literature. Correspondence analysis was used to survey the structure-activity relationships of sex pheromones in seven subfamilies. Structural, stereochemical, and functional features of active molecules were related to taxonomy. This multidimensional analysis revealed that the prevalent chemical frame of noctuid moth pheromones was a monounsaturated acetate withZ stereochemistry and a double bond on the fifth carbon closest to the nonfunctional branch of the molecule. Possible phylogenetic relationships within Noctuidae and between Noctuidae and other families are discussed in light of the sex pheromone biochemistry. Female sex pheromones appeared to be an additional character to be considered in the classification of noctuid moths.     

Non-Isothermal crystallization of isotactic polypropylene in dotriacontane. I: Effects of dilution,cooling rate,and nucleating agent addition on overall crystallization kinetics

The overall non-isothermal crystallization kinetics for nucleated and non-nucleated isotactic polypropylene (iPP) in dotriacontane systems was investigated. Adipic acid was used as the nucleating agent. Crystallization peak temperature was determined via differential scanning calorimetry as a function of the experimentally controlled variables iPP concentration, cooling rate, and nucleating agent concentration. The influence of these variables on crystallization mechanism and spherulitic structure as implied by the Ozawa and Ziabicki analyses was determined. The non-isothermal crystallization kinetics presented here are the first for iPP-diluent systems with and without nucleating agent.     

Inactivation of Giardia muris Using Ozone and Ozone-Hydrogen Peroxide

The disinfection effects of the ozone molecule alone and that of ozone decomposition products when inactivating Giardia muris cysts were investigated at bench-scale using two different ozone demand-free laboratory buffer systems. The first water was a 0.05 M phosphate buffer with hydrogen peroxide added at a 10:1 weight ratio. The second water was a 0.05 M phosphate – 0.01 M bicarbonate buffer which quickly scavenged radical species from ozone decomposition. The C3H/HeN mouse model was used to assess the infectivity of ozone treated cysts.

The phosphate-bicarbonate buffer system had significantly greater (P ≤ 0.05) inactivation of G. muris cysts than that observed in the phosphate buffer – peroxide system where ozone was completely decomposed in less than 120 s. Consequently, the design of ozone disinfection processes should maintain ozone residual for disinfection prior to the addition of hydrogen peroxide for the oxidation of other compounds.     

Polymer modification and synthesis using sulphenyl derivatives: 9. Addition of alkylsulphenyl chlorides to cis-1, 4-polybutadiene

Methanesulphenyl chloride and n-butanesulphenyl chloride add readily across the double bonds in cis-1,4-polybutadiene. The addition is highly regioselective so that long sequences of saturated units are formed. The products are very unstable, evolving hydrogen chloride on standing, but can be stabilized by replacing the labile chlorine atom with other nucleophiles in a phase transfer catalysed reaction.     

Sub-ambient cold-start emissions reduction using SwRI® PO x catalyst technology

This paper describes the application of SwRI’s cold-start PO _x catalyst technology to reduce cold-start hydrocarbon emissions from a US Tier 2 vehicle at −7 °C. A reduction in −7 °C (20 °F) cold-start hydrocarbons will help US Tier 2 vehicles meet the proposed EPA NMOG standards. Improvements in cold temperature hydrocarbon emissions would also be beneficial in many parts of Europe during the winter months. In this work, a total hydrocarbon reduction of 19% was realized at 24 °C, in line with previous results, but only up to 3% at −7 °C. Insufficient oxygen in the engine-out exhaust gas at −7 °C was determined to be the reason why the PO _x catalyst failed to significantly reduce HC emissions. Addition of supplemental oxygen to the exhaust during the cold-start, to simulate an adjustment in the engine calibration to less rich operation, resulted in a total hydrocarbon reduction of 18% with the PO _x catalysts in place, but no benefit when the PO _x catalysts were removed. Hence, the PO _x catalyst approach can be used to good effect, even under sub-ambient cold-start conditions.     

Feeding response of Ips paraconfusus to phloem and phloem metabolites of Heterobasidion annosum-inoculated ponderosa pine,Pinus ponderosa

In studies of feeding by the bark beetle, Ips paraconfusus, two pine stilbenes (pinosylvin and pinosylvin methyl ether), ferulic acid glucoside, and enantiomers of the four most common sugars present in ponderosa pine phloem (sucrose, glucose, fructose, and raffinose) did not stimulate or reduce male feeding when assayed on wet -cellulose with or without stimulatory phloem extractives present. When allowed to feed on wet -cellulose containing sequential extracts (hexane, methanol, and water) of ponderosa pine phloem, methanol and water extractives stimulated feeding, but hexane extractives did not. Males confined in wet -cellulose containing aqueous or organic extracts of culture broths derived from phloem tissue and containing the root pathogen, Heterobasidion annosum, ingested less substrate than beetles confined to control preparations. In an assay using logs from uninoculated ponderosa pines, the mean lengths of phloem in the digestive tracts increased as time spent feeding increased. Males confined to the phloem of basal logs cut from ponderosa pines artificially inoculated with H. annosum ingested significantly less phloem than beetles in logs cut from trees that were (combined) mock-inoculated or uninoculated and did not contain the pathogen. However, individual pathogen-containing treatments were not significantly different from uninoculated controls. It was concluded that altered feeding rates are not a major factor which may explain why diseased ponderosa pines are colonized by I. paraconfusus.     

Engineering a pharmacologically superior form of leptin for the treatment of obesity

Leptin plays a central role in the homeostasis of body weight through its regulatory effects on appetite and energy expenditure, yet in trials as a therapeutic agent for the treatment of obesity in humans it has been disappointing. The poor clinical efficacy of leptin results from its short circulating half-life, low potency and poor solubility, necessitating large and frequent doses to obtain even modest clinical benefit. Engineered Fc-leptin immunofusins, consisting of the Fc fragment of an immunoglobulin gamma chain followed by leptin, exhibit improved pharmacological properties with very consistent and potent biological activities. Furthermore, in extending the circulating half-life of the protein in vivo from a few minutes for leptin to many hours for Fc-leptin, these proteins have the potential to reduce drastically the dosage and frequency of administration required to obtain clinical benefit. The results of this study show that the engineered leptin immunofusins described here have significantly enhanced pharmacological properties in comparison with the recombinant leptin that was used in clinical trials. As such, they could represent an important step towards a therapeutically superior form of leptin if the disappointing performance of leptin in early clinical trials was due to its poor pharmacological properties rather than any conceptual weakness in the strategy of using leptin for the treatment of obesity and its related disorders.     

Mechanism of paper wet strength development by polycarboxylic acids with different molecular weight and glutaraldehyde/poly(vinyl alcohol)

In our previous research, we found that crosslinking paper using poly(carboxylic acid)s with different molecular weight or using the combination of glutaraldehyde and poly(vinyl alcohol) (PVA) significantly improved the wet strength of the paper. In this research, we studied the mechanism of paper wet strength development using crosslinking systems with different molecular weight by measuring scanning electron microscopic (SEM) images, wet strength, folding endurance, wet thickness, water retention, and Z‐direction tensile strength of the treated paper. The paper crosslinked by a high‐molecular weight (MW) poly(carboxylic acid) shows more swelling by water than that crosslinked by a low‐MW polycarboxylic acid in the SEM micrographs even though both treated paper samples have similar wet strength. Thus, the data suggest that high‐MW poly(carboxylic acid)s promote the formation of interfiber crosslinking. Crosslinking paper by glutaraldehyde, a crosslinking agent of small molecular size, improves wet strength and reduces flexibility and swellability of paper because of the formation of intrafiber crosslinking. Combining glutaraldehyde with PVA as a coreactant increases wet strength and also retains flexibility and swellability of the treated paper because of the formation of interfiber crosslinking. The hypothesis that PVA reacts with glutaraldehyde to form a polymeric pentanedialated‐PVA crosslinking system and promotes the formation of interfiber crosslinking on the paper is supported by the data of wet strength, folding endurance, wet thickness, water retention, and Z‐direction tensile strength of the treated paper. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 277–284, 2006