起重机监控器双机协同中CAN总线的应用

为了满足工程建设日益大型化的发展,两台以及多台起重机共同作业的需求日益增强。设定了起重机双机协同模型,使用飞思忙尔MC9S12DGl28单片机以实现起重机监控器的双机协同功能,设计了CAN总线节点模块来实现双机的数据采集、状态检测和故障处理等功能,给出了实现双机协同的硬件设计和软件流程图。系统在实际运行过程中稳定、可靠,能保证起重机在双机协同时做到步调一致,并很好地应对故障的发生,同时表明CAN总线在起重机工作环境中能够很好地发挥自身通讯距离长、抗干扰能力强等优势,符合了双机协同的功能要求。     

汽车仪表板模型表面的反向工程重构技术

曲面重构技术是反向工程的重要组成部分,在工业制造、医疗、艺术、军事等应用领域意义重大,已成为国内外的研究热点.对于反向工程的研究内容,数据获取方法、曲面重构技术理论和相关软件进行了介绍,并举例重点阐述了一些典型的方法.     

The multivariable model-based control of the non-alumina electrolyte variables in aluminum smelting cells

This paper investigates the application of multivariable model-based control to improve the regulatory control of electrolyte temperature, aluminum fluoride concentration, liquidus temperature, superheat, and electrolyte height. Also examined are therappropriateness of different control structures and the possible inclusion of recently developed sensors for alumina concentration and individual cell duct flowrate, temperature, and heat loss. For the smelter in this study, the maximum improvement possible with a multivariable model-based controller is predicted to be 30–40% reduction in standard deviation in electrolyte temperature, aluminum fluoride concentration, liquidus temperature, and superheat, and around half this for electrolyte height. Three control structures were found to be appropriate; all are different than the existing control structure, which was found to be suboptimal. Linear Quadratic Gaussian controllers were designed for each control structure and their predicted performance compared. Comalco Research.     

新型阳离子紫外光引发剂碘锚盐的光谱表征及分析

采用紫外光谱法(UV)分析新型阳离子光引发剂二甲苯基碘六氟磷酸盐。系统研究了UV法测试条件,采用氯仿重结晶提纯样品、以无水乙醇为溶剂、在λmax=236 nm测吸光度,ε=1.8421×104L.mol-1.cm-1,线性范围为1~80 mg.L-1,加标回收率为99.0%。     

机械式轮胎定型硫化机常见故障与分析

较详细的介绍了机械式轮胎定型硫化机在生产过程中所遇上的各种常见故障并进行了分析，提出了解决方案。     

基于海量搜索历史数据的用户兴趣模型

针对互联网搜索引擎环境中,基于海量搜索历史数据分析用户兴趣的问题,提出一种改进的用户兴趣模型。该模型根据用户搜索的历史数据,结合向量空间模型（ VSM ）和TF-IDF算法,递归地回溯出用户兴趣权重列表。为解决用户兴趣变化和时间性能的问题,该模型引入时间遗忘机制进行动态更新,并在Hadoop分布式系统架构下利用MapReduce分布式编程模型进行实现。实验结果表明,改进的用户兴趣模型的查准率和召回率都能达到50',具有较好的可行性和可用性。     

Preparation of Thin Sections of Coated Fibers for Characterization by Transmission Electron Microscopy

A method of preparing transmission electron microscopy (TEM) specimens of coated ceramic fibers has been developed, which produces large electron transparent areas due to the minimal preferential milling of the fiber, coating, or epoxy matrix. Multiple individual fibers or tows are impregnated with a high-temperature epoxy and contained to assure a high fiber-to-epoxy volume ratio. The samples are then sectioned and mechanically thinned either parallel or normal to the fiber axes using a wedge polisher on diamond lapping films to achieve a thickness of less than 5 μ.m. The thinned sample is then ion-milled to electron transparency in less than 30 min, giving representative specimens of the coating, fiber, and coating-fiber interface. This technique is also well suited to preparing extremely flat specimens for scanning electron microscopy analysis of thin coatings. Examples of TEM sections of coated fibers prepared using this technique are presented.     

Reduction of sulphur in PbSPbCl2NaCl melts

The reduction of dissolved sulphur and the soluble species formed during the electrolysis of PbS dissolved in the PbCl₂NaCl eutectic has been studied chronopotentiometrically. The pre-lead reduction process reported earlier[1] can now be assigned to a subsulphide species that is generated electrochemically. At higher PbS concentrations (eg 10^?3 mol cm^?3), elemental sulphur introduces a new reduction wave in addition to the subsulphide. The saturation solubility of sulphur is approximately proportional to the square of the PbS concentration. It has been estimated to be 2.3× 10^?4 mol S cm^?3 at 430°C for a melt containing 2.4× 10^?3 mol PbS cm^?3 in the PbCl₂-NaCl eutectic.     

1-(5-乙基-1,3,4-噻二唑基)-3-苯基硫脲的合成及生物活性

研究了 1 - ( 5 -乙基 - 1 ,3,4-噻二唑基 ) - 3-苯基硫脲的合成及抗菌活性。以 5 -乙基 - 2 -氨基 - 1 ,3,4-噻二唑和异硫氰酸苯酯为原料 ,在十六烷基三甲基溴化铵催化下 ,合成 1 - ( 5 -乙基 - 1 ,3,4-噻二唑基 ) - 3-苯基硫脲 ,找到了较好的合成工艺条件 ,结果表明 :5 -乙基 - 2 -氨基 - 1 ,3,4-噻二唑和异硫氰酸苯酯的摩尔比为 1∶ 1 .8,乙腈为溶剂 ,水浴加热回流 4.0 h,十六烷基三甲基溴化铵为 2 g,1 - ( 5 -乙基 - 1 ,3,4-噻二唑基 ) - 3-苯基硫脲的产率为 5 9.76%。同时发现 1 - ( 5 -乙基 - 1 ,3,4-噻二唑基 ) - 3-苯基硫脲有较强的抗菌活性