Design and characterization of PNVCL-based nanofibers and evaluation of their potential applications as scaffolds for surface drug delivery of hydrophobic drugs

In this work, nanofiber scaffolds for surface drug delivery applications were obtained by electrospinning poly(N-vinylcaprolactam) (PNVCL) and its blends with poly(ε-caprolactone) and poly(N-vinylcaprolactam)-b-poly(ε-caprolactone). The process parameters to obtain smooth and beadless PNVCL fibers were optimized. The average fibers diameter was less than 1 μm, and it was determined by scanning electron microscopy analyses. Their affinity toward water was evaluated by measuring the contact angle with water. The ketoprofen release behavior from the fibers was analyzed using independent and model-dependent approaches. The low values of the release exponent (n < 0.5) obtained for 20 and 42 °C, indicating a Fickian diffusion mechanism for all formulations. Dissolution efficiencies (DEs) revealed the effect of polymer composition, methodology used in the electrospinning process, and temperature on the release rate of ketoprofen. PNVCL/poly(N-vinylcaprolactam)-b-poly(ε-caprolactone)-based nanofibers showed greater ability to control the in vitro release of ketoprofen, in view of reduced kinetic constant and DE, making this material promising system for controlling release of hydrophobic drugs. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48472.     

Physical properties of spray dried acerola pomace extract as affected by temperature and drying aids

The objective of this study was to assess the impact of some processing parameters on moisture content, flowability, hygroscopicity and water solubility of spray dried acerola pomace extract using maltodextrin and cashew tree gum as drying aids. The experiment was conducted according to Response Surface Methodology, with the independent variables being: inlet temperature (170-200 °C), drying aid/acerola ratio (2:1-5:1), and percent replacement of maltodextrin by cashew tree gum (0-100%). Higher inlet temperatures favored the desired physical properties of the powders, decreasing their moisture contents and hygroscopicity, and increasing flowability. The drying aids decreased the powder hygroscopicity, especially cashew tree gum (CTG), which also enhanced the powder flowability. The best processing conditions to obtain a free-flowing and least hygroscopic acerola pomace extract powder by spray drying were: inlet temperature above 194 °C; drying aid/acerola solid ratio, 4:1; percent replacement of maltodextrin by CTG, at least 80%.     

Effect of chitosan and Dysphania ambrosioides on the bone regeneration process: A randomized controlled trial in an animal model

The focus of this triple‐blind study was on evaluating the effect of chitosan combined with Dysphania ambrosioides (A) extract on the bone repair process in vivo. In total, 60 male Wistar rats (Rattus norvegicus albinus) weighing between 260 and 270 g were randomly selected for this study and distributed into four groups (n = 15). Group C (chitosan), Group CA5 (chitosan + 5% of D. ambrosioides), Group CA20 (chitosan + 20% of D. ambrosioides), and Group CO (Control‐Blood clot). In each animal, bone defects measuring 2 mm in diameter were performed in both tibias for placement of the substances. After 7, 15, and 30 days, the animals were sedated and sacrificed using the cervical dislocation technique and the tissues were analyzed under optical microscope relative to the following events: inflammatory infiltrate, necrosis, osteoclasts, osteoblasts, fibroblasts, periosteal, and endosteal bone formation. The data were evaluated to verify distribution using the Kolmogorov–Smirnov test, and variance, using the Levene test; as distribution was not normal, data were subjected to the Kruskal–Wallis and Dunn nonparametric tests (p < .05). A significant inflammatory infiltrate was observed in Group CA5 (p = .008) in the time interval of 7 days, and in Group C at 15 (p = .009) and 30 (p = .017) days. Osteoblastic activity was more significant in Group CA20 (p = .027) compared with CA5 in the time interval of 7 days. Group CA20 demonstrated a significantly higher endosteal and periosteal bone formation value in the time interval of 7 (p = .013), 15 (p = .004), and 30 days (p = .008) compared with the other groups. The null hypothesis was refuted, bone regeneration was faster in spheres with an association of chitosan and 20% extract, and complete bone repair occurred clinically at 15 days and histologically at 30 days. The spheres proved to be a promising method for the biostimulation of alveolar bone repair and bone fractures.     

Crystallization of porcine insulin with carbon dioxide as acidifying agent

Recent studies on the use of volatile electrolytes such as CO₂ in protein precipitation showed that these agents are a promising alternative to the conventional acids. This use of volatile electrolytes prevents protein denaturation due to local pH extremes, and saline effluent generation is greatly reduced, as the volatile electrolyte may be separated and recovered from solution just by pressure release. In this work, insulin was successfully crystallized in the presence of zinc using CO₂ as acidifying agent. The crystals obtained were rhombohedral, a common shape for porcine insulin crystals that contain zinc in their structure, and their average size varied with the mixing applied.     

Modification of vermiculite by polymerization and carbonization of glycerol to produce highly efficient materials for oil removal

Impregnation and reaction of glycerol (Gly) on the surface of expanded vermiculite (EV) was used to produce a highly efficient absorbent to remove water spilled oils. The vermiculite was impregnated by glycerol containing 1, 2 and 4 mol% of H₂SO₄ at EV/Gly ratios, i.e. 1/1, 1/2 and 1/3, and heated to 380, 580 and 750 °C. SEM, TG, BET specific surface area, and Raman analyses indicated that glycerol at 380 °C forms a polymer layer. At higher temperatures, the polymer decomposed to form porous carbon covering the EV surface. These materials were investigated for the removal of three different oils, i.e. diesel, soybean and engine oil spilled on water. The obtained results showed a remarkable increase on oil removal of 600% compared to the non-modified EV.     

Radar Altimetry Aids Managing Gauge Networks

The hydrological observation network in the Amazon basin is made of conventional rainfall and water level stations presently maintained by the Agência Nacional de Águas (ANA), the National Agency for Waters. The water level network has long been plagued by difficulties associated with spatial coverage, timely delivery and data errors. Satellite observations are important means for providing hydrologic data with acceptable spatial and temporal resolution, and radar altimeters embarked onboard successive satellites since the early 1970s collect measurements of water level over rivers in a well-defined geodetic reference frame and can be used to address some of these problems. Nowadays, satellite altimetry can be used to collect the time variations of the water levels over many rivers throughout the word, as long as the reach are several hundred meters wide. This ability is particularly interesting in ungauge basins but it can also be used as an independent source of information to cross-check existing gauge series. In the present study, we focus on examples from the Amazon basin where radar altimetry has been used to provide an independent dataset that can be used to support the management of hydrological observation networks by including new data together with conventional field data,     

Polyaniline‐modified cellulose nanofibrils as reinforcement of a smart polyurethane

Segmented polyurethanes exhibiting shape memory properties were modified by the addition of polyaniline (PANI)‐coated cellulose nanofibrils (CNFs). The two‐phase structure of the polymer is responsible for the material's ability to ‘remember’ and autonomously recover its original shape after being deformed in response to an external thermal stimulus. PANI was grown on the surface of the CNFs via in situ polymerization. Modified nanocrystals were added to the segmented polyurethane in concentrations ranging from 0 to 15 wt%. The changes in the material properties associated with the percolation of the coated fibrils appear at higher concentrations than previously observed for non‐modified CNFs, which suggests that fibril agglomeration is occurring due to the PANI coating. The shape memory behavior of the composites is maintained at about the same level as that of the unfilled polyurethane only up to 4 wt% of fibrils. At higher concentrations, the rigidity of the nanofibrils as well as their interaction with the hard‐segment phase and the increasing difficulty of dispersing them in the polymer collaborate to produce early breakage of the specimens when stretched at temperatures above the melting point of the soft segments. Copyright © 2010 Society of Chemical Industry     

Hot-erosion of nano-bonded refractory castables for petrochemical industries

Cold-erosion tests are usually applied for refractory castable evaluation in petrochemical industries, mainly for materials used in cyclones and risers of fluidized catalytic cracking units (FCCU). Due to the fact that in the operation, the refractory material is subjected to high temperature, at first, hot-erosion tests could be more representative. Erosion wear has a great influence on the FCCU refractory working life and the lost income associated with a production halt can reach values close to US$500,000 per day. These aspects are strong enough to justify hot-erosion resistance characterization. The test viability, which could result in selecting better material for the application, was evaluated using commercial products and nano-bonded castables from 200 up to 815 °C. At this temperature range, a significant difference between the cold and hot-erosion loss was not observed. Therefore, it indicates that the cold-erosion test is suitable and sufficient for selecting refractory castables for FCCU applications. The cold-erosion test also presented a higher data correlation with the splitting tensile strength and the hot modulus of rupture. Regarding the different evaluated materials, the nano-bonded castables showed a higher erosion resistance and were less susceptible to the temperature effect than the calcium aluminate cement bonded commercial products.     

Anticoagulant, Antioxidant and Antitumor Activities of Heterofucans from the Seaweed Dictyopteris delicatula

In the present study, six families of sulfated polysaccharides were obtained from seaweed Dictyopteris delicatula by proteolytic digestion, followed by acetone fractionation and molecular sieving on Sephadex G-100. Chemical analyses demonstrated that all polysaccharides contain heterofucans composed mainly of fucose, xylose, glucose, galactose, uronic acid, and sulfate. The fucans F0.5v and F0.7v at 1.0 mg/mL showed high ferric chelating activity (～45%), whereas fucans F1.3v (0.5 mg/mL) showed considerable reducing power, about 53.2% of the activity of vitamin C. The fucan F1.5v presented the most prominent anticoagulant activity. The best antiproliferative activity was found with fucans F1.3v and F0.7v. However, F1.3v activity was much higher than F0.7v inhibiting almost 100% of HeLa cell proliferation. These fucans have been selected for further studies on structural characterization as well as in vivo experiments, which are already in progress.