Optimized runner systems for multicavity injection molds. Part I: Runner sizing

A strategy has been developed for optimizing the design of runners in injection molds with multiple identical cavities. This approach is based on mathematically rigorous derivations using the power-law viscosity model under conditions where the pressure drop in runners is not significantly influenced by temperature variation. The design rule to minimize runner volume for specified injection pressure and rate is simple: The diameter of any runner downstream from a junction is determined by dividing the diameter of the upstream runner by the cube root of the number of downstream branches at the junction. This rule has been extended to noncircular runners using the hydraulic radius approximation and the requirement of equal velocities in the circular and noncircular runners. Minimum volume cross-sectional shapes have been determined for U-shaped and trapezoidal shaped runners. For circular runners a method for estimating the pressure drop for nonisothermal flow quantifies the deviation from the pressure drop for isothermal flow at the melt temperature. As runner size decreases, the trend is for viscous heating to dominate over cooling and for the estimated nonisothermal pressure drop to be lower than the isothermal pressure drop.     

Inactivation of Baculovirus by Isoflavonoids on Chickpea (<Emphasis Type=Italic>Cicer arietinum</Emphasis>) Leaf Surfaces Reduces the Efficacy of Nucleopolyhedrovirus Against <Emphasis Type=Italic>Helicoverpa armigera</Emphasis>

Biological pesticides based on nucleopolyhedroviruses (NPVs) can provide an effective and environmentally benign alternative to synthetic chemicals. On some crops, however, the efficacy and persistence of NPVs is known to be reduced by plant specific factors. The present study investigated the efficacy of Helicoverpa armigera NPV (HearNPV) for control of H. armigera larvae, and showed that chickpea reduced the infectivity of virus occlusion bodies (OBs) exposed to the leaf surface of chickpea for at least 1 h. The degree of inactivation was greater on chickpea than that previously reported on cotton, and the mode of action is different from that of cotton. The effect was observed for larvae that consumed OBs on chickpea leaves, but it also occurred when OBs were removed after exposure to plants and inoculated onto artificial diet, indicating that inhibition was leaf surface-related and permanent. Despite their profuse exudation from trichomes on chickpea leaves and their low pH, organic acids—primarily oxalic and malic acid—caused no inhibition. When HearNPV was incubated with biochanin A and sissotrin, however, two minor constituents of chickpea leaf extracts, OB activity was reduced significantly. These two isoflavonoids increased in concentration by up to 3 times within 1 h of spraying the virus suspension onto the plants and also when spraying only the carrier, indicating induction was in response to spraying and not a specific response to the HearNPV. Although inactivation by the isoflavonoids did not account completely for the level of effect recorded on whole plants, this work constitutes evidence for a novel mechanism of NPV inactivation in legumes. Expanding the use of biological pesticides on legume crops will be dependent upon the development of suitable formulations for OBs to overcome plant secondary chemical effects.     

Fabrication of BSCF-based mixed oxide ionic-electronic conducting multi-layered membrane by sequential electrophoretic deposition process

The Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-δ (BSCF)-based multi-layered oxygen separation membrane was fabricated by the sequential electrophoretic deposition (EPD) process. A thin porous/dense bi-layer of BSCF was formed on a thick porous support of BSCF. The porous support prepared by a sacrificial template method using BSCF powder mixed with wheat starch (30 wt%) as a pore-forming agent, followed by uniaxial pressing and low-temperature sintering, was directly used as an EPD electrode. A thin BSCF layer was first formed on the porous support, and then a thin BSCF + PMMA (polymethyl methacrylate) layer was sequentially formed on the thin BSCF layer using a bimodal suspension of BSCF and PMMA. A 30-μm thin porous/dense bi-layer of BSCF of which the total thickness was obtained by optimizing the processes of EPD and subsequent co-sintering. The oxygen separation performance of 3.7 ml (STP) min^?1 cm^?2 at 860 °C was achieved for the BSCF-based multi-layered oxygen separation membrane.     

Phenolic content and antioxidant activity of extracts from whole buckwheat (Fagopyrum esculentum Möench) with or without microwave irradiation

The purpose of this study was to extract phenolic compounds and antioxidant activity from buckwheat with water, 50% aqueous ethanol, or 100% ethanol using microwave irradiation or a water bath for 15 min at various temperatures (23–150 °C). Phenolic content of extracts increased with increasing temperature. In general, phenolic contents in microwave irradiated extracts were higher than those heated with a water bath. The highest phenolic content, 18.5 ± 0.2 mg/g buckwheat, was observed in the extract that was microwave irradiated in 50% aqueous ethanol at 150 °C. The highest antioxidant activities, 5.61 ± 0.04–5.73 ± 0.00 μmol Trolox equivalents/g buckwheat, were found in the 100% ethanol extracts obtained at 100 and 150 °C, independent of heat source. These results indicate that microwave irradiation can be used to obtain buckwheat extracts with higher phenolic content and similar antioxidant activity as extracts heated in a water bath.     

Novel alkaline earth silicate sealing glass for SOFC: Part II. Sealing and interfacial microstructure

This is the second part of a study of a novel Sr–Ca–Ni–Y–B silicate sealing glass for solid oxide fuel cells (SOFC). Part I of the study addresses the effect of NiO on glass forming, thermal, and mechanical properties, and is presented in the preceding paper. In this paper (part II), candidate composite glass with 10 vol.% NiO was tested for sealing standard coupons of Ni/YSZ anode-supported YSZ electrolyte bilayer and metallic interconnect Crofer22APU at various temperatures. Samples sealed at the highest temperature (1050 °C) showed hermetic seal after fully reduction and 10 thermal cycles. The interfacial microstructure characterization showed no distinct reactions at the interfaces of glass/YSZ or glass/metal, though some segregation of Ni was found along the glass/metal interface. Possible reactions were discussed. Overall the composite glass with 10 vol.% NiO appeared to be a good candidate for SOFC sealing.     

Process safety management of a fuel gas conditioning facility using fault tree analysis

This paper discusses a process hazard management study of a fuel gas conditioning facility based on stateof-the-art fault tree analysis techniques. This facility lowers the water and hydrocarbon dewpoints of a high pressure fuel gas exposed to frigid temperatures during distribution. Using hazards checklists and guidelines as well as internal reviews, various process hazards were identified for this facility. Computerized fault tree analysis techniques were used to identify the failure sequences which could lead to process hazards, and analysts used these results to evaluate the impact of specific hazards upon process safety. Through recommendations presented in the study, the facility owner gained an increased awareness of potential problems and made modifications to reduce the possibility of a hazardous condition and subsequent catastrophic failure.     

Disgust as a disease-avoidance mechanism.

Many researchers have claimed that the emotion of disgust functions to protect us from disease. Although there have been several discussions of this hypothesis, none have yet reviewed the evidence in its entirety. The authors derive 14 hypotheses from a disease-avoidance account and evaluate the evidence for each, drawing upon research on pathogen avoidance in animals and empirical research on disgust. In all but 1 case, the evidence favors a disease-avoidance account. It is suggested that disgust is evoked by objects/people that possess particular types of prepared features that connote disease. Such simple disgusts are directly disease related, are acquired during childhood, and are able to contaminate other objects/people. The complex disgusts, which emerge later in development, may be mediated by several emotions. In these cases, violations of societal norms that may subserve a disease-avoidance function, notably relating to food and sex, act as reminders of simple disgust elicitors and thus generate disgust and motivate compliance. The authors find strong support for a disease-avoidance account and suggest that it offers a way to bridge the divide between concrete and ideational accounts of disgust. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Pregnancy outcome after insemination of frozen-thawed bovine semen packaged in two straw sizes: A meta-analysis

The 0.25-mL French straw has been thoroughly studied and compared with the 0.5-mL French straw for about 40 yr. The 0.25-mL straw has some distinct advantages over the 0.5-mL straw in terms of storage efficiency and extender usage. The 0.25-mL straw is more sensitive to temperature change, which may be an advantage in some freezing systems with a slow freezing rate, but provides no advantage when the freezing rate is accelerated to optimize freezing in 0.5-mL straws. Disadvantages of the 0.25-mL straw include increased sensitivity to post-thaw temperature change, slightly more difficult handling, and inferior readability. Fertility of cattle inseminated with extended semen packaged in 0.25-mL straws assessed in 13 studies (>770,000 inseminations) had a weighted advantage of 0.9% (0.7% unweighted advantage) compared with semen packaged in 0.5-mL straws. In 2 studies in which palpated conception rates were obtained, the weighted advantage of the 0.25-mL versus the 0.5-mL straw was 0.2% (0.4% unweighted advantage). Paired t-tests did not detect a significant difference in pregnancy outcome between straw sizes. Logistic regression of all 15 studies (>780,000 inseminations) detected large variation among studies and tended to detect a small advantage for the 0.25-mL straw. Meta-analyses applied to fixed- or random-effect models of all 15 studies indicated the average odds of having a greater pregnancy outcome with the 0.25-mL straw were either 3 or 4% greater. Based on these odds ratios, the expected proportion of difference in pregnancy outcome translated into a difference of 0.74%. These small differences in pregnancy outcomes do not provide compelling evidence that a transition from 0.50- to 0.25-mL straws in the United States is warranted, especially given the added negative aspects of semen handling and the greater potential for technician × straw type interactions among herdsman inseminators.     

Effect of various heat treatments on plasminogen activation in bovine milk during refrigerated storage

Plasmin and plasminogen‐derived plasmin activities were measured in heated milk with and without the addition of plasminogen activator, before and after storage at 4 °C for 96 h. The effect of a free sulfhydryl group donor, β‐lactoglobulin or cysteine, on plasminogen activation was investigated in a model system and milk. Heating milk to 75 °C enhanced plasminogen activation that was marked by a considerable increase in plasmin activity. Heating at 85 and 90 °C caused a significant decrease in plasmin and plasminogen‐derived plasmin activities. However, after storage, significant plasmin levels were restored because of the activation of remaining unfolded plasminogen. Both β‐lactoglobulin and cysteine significantly decreased plasmin and plasminogen‐derived plasmin activities in a model system. While endogenous β‐lactoglobulin was not sufficient to completely eliminate plasminogen activation in milk, cysteine addition prior to pasteurisation significantly decreased plasmin and plasminogen‐derived plasmin activities. Results highlighted the importance of the remaining plasminogen in heated milk systems.     

Preparation and characterization of polyelectrolyte copolymers containing methyl methacrylate and 2-hydroxyethyl methacrylate. I. Polymers based on methacrylic acid

Acidic polyelectrolyte copolymers containing 2-hydroxyethyl methacrylate (HEMA), methyl methacrylate (MMA), and methacrylic acid (MAA) were prepared by free radical polymerization to high conversion in solution. Copolymer yields were obtained by gravimetry (all in the 30–50% range), relative molecular weights estimated by intrinsic viscosity measurements (all in the 50–70 cc/g range), tacticity by ¹³C nuclear magnetic resonance (NMR) spectroscopy (all polymers predominantly syndiotactic with some atactic content), and composition by acid/base titrations in conjunction with ¹H-NMR spectroscopy (all close to the monomer charge ratios). Acid strengths or apparent pKa's were examined as a function of extent of ionization. Measurements performed in water indicated that the compact/extended coil transformation in predominantly syndiotactic polymethacrylic acid occurs also in copolymers of similar tacticity containing moderate to high concentrations of MAA. The apparent pKa of such polymers containing only small amounts of MAA did not vary with extent of ionization, indicating a low degree of interaction between the acid groups. In copolymer pairs containing similar amounts of MAA but differing HEMA and MMA contents, the polymer containing more HEMA appeared the stronger acid, presumably due to a better solvation of that polymer which would increase the net spatial charge–charge separation and decrease cooperative effects that lead to suppressed ionization.