Enhancements in sugar immobilization in polymeric macroporous matrices for affinity capture

The use of macroporous monolithic matrices in the purification of biocompounds is constantly growing and developing. In this work, the objective was to optimize the quantity of N-acetyl-D-glucosamine (D-GlcNAc) immobilized on the surface of macroporous polymeric cryogels for capture of lectins from less clarified solutions. Surface response methodology was applied and it was observed that the immobilization temperature of the glutaraldehyde (GLU) and the D-GlcNAc concentration influenced the amount of sugar immobilized. The matrices produced with 1.1% of allyl glycidyl ether were functionalized by GLU. Optimal maximum condition was obtained with mean value of 160.39 ± 26.38 mg of D-GlcNAc immobilized per gram of dry cryogel. Characterization analyses of the matrices showed that the activation process was effective, maintaining the macroporous structure and physical characteristics. The adsorbents produced were tested for capture of lectins from a crude protein solution of barley. At tested conditions, adsorbent capture around 11% of protein in solution but reduce the hemaglutinating capacity in 40%, demonstrating its selectivity. The cryogels functionalized with D-GlcNAc present potential for use in capture compounds by affinity with carbohydrates, such as lectins. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47956.     

Chitosan impregnated gutta-percha points: antimicrobial in vitro evaluation and mechanical properties

Chitosan-impregnated gutta-percha points (ChitGPP) were tested for their ability to inhibit the growth of microorganisms usually involved in root canal infections. Their mechanical properties were also studied and compared with the commonly used commercial points in endodontics. ChitGPP were more efficient in reducing the microbial load than those without chitosan. ChitGPP also possess better tensile and elastic properties than commercial ones. After six months of storage, ChitGPP’s were still able to reduce the bacterial load by 1 log, suggesting that impregnation of gutta-percha points with chitosan could be a good alternative to obtain gutta-percha points with improved antimicrobial properties.     

A Mitochondrial Membrane Exopolyphosphatase Is Modulated by, and Plays a Role in, the Energy Metabolism of Hard Tick Rhipicephalus (Boophilus) microplus Embryos

The physiological roles of polyphosphates (polyP) recently found in arthropod mitochondria remain obscure. Here, the relationship between the mitochondrial membrane exopolyphosphatase (PPX) and the energy metabolism of hard tick Rhipicephalus microplus embryos are investigated. Mitochondrial respiration was activated by adenosine diphosphate using polyP as the only source of inorganic phosphate (P(i)) and this activation was much greater using polyP(3) than polyP(15). After mitochondrial subfractionation, most of the PPX activity was recovered in the membrane fraction and its kinetic analysis revealed that the affinity for polyP(3) was 10 times stronger than that for polyP(15). Membrane PPX activity was also increased in the presence of the respiratory substrate pyruvic acid and after addition of the protonophore carbonyl cyanide-p-trifluoromethoxyphenylhydrazone. Furthermore, these stimulatory effects disappeared upon addition of the cytochrome oxidase inhibitor potassium cyanide and the activity was completely inhibited by 20 μg/mL heparin. The activity was either increased or decreased by 50% upon addition of dithiothreitol or hydrogen peroxide, respectively, suggesting redox regulation. These results indicate a PPX activity that is regulated during mitochondrial respiration and that plays a role in adenosine-5'-triphosphate synthesis in hard tick embryos.     

Anticoagulant, Antioxidant and Antitumor Activities of Heterofucans from the Seaweed Dictyopteris delicatula

In the present study, six families of sulfated polysaccharides were obtained from seaweed Dictyopteris delicatula by proteolytic digestion, followed by acetone fractionation and molecular sieving on Sephadex G-100. Chemical analyses demonstrated that all polysaccharides contain heterofucans composed mainly of fucose, xylose, glucose, galactose, uronic acid, and sulfate. The fucans F0.5v and F0.7v at 1.0 mg/mL showed high ferric chelating activity (～45%), whereas fucans F1.3v (0.5 mg/mL) showed considerable reducing power, about 53.2% of the activity of vitamin C. The fucan F1.5v presented the most prominent anticoagulant activity. The best antiproliferative activity was found with fucans F1.3v and F0.7v. However, F1.3v activity was much higher than F0.7v inhibiting almost 100% of HeLa cell proliferation. These fucans have been selected for further studies on structural characterization as well as in vivo experiments, which are already in progress.     

Corrosion behavior of Eurofer 97 and ODS-Eurofer alloys compared to traditional stainless steels

In the present work, the corrosion resistance of ferritic-martensitic EUROFER 97 and ODS-EUROFER steels was tested in solutions containing NaCl or H₂SO₄ and KSCN, both at 25 °C. The results were compared to those of AISI 430 ferritic and AISI 410 martensitic conventional stainless steels. The as-received samples were tested by electrochemical techniques, specifically, electrochemical impedance spectroscopy, potentiodynamic polarization curves, and double-loop electrochemical potentiokinetic reactivation tests. The surfaces were observed by scanning electron microscopy after exposure to corrosive media. The results showed that EUROFER 97 and ODS-EUROFER alloys present similar corrosion resistance but lower than ferritic AISI 430 and martensitic 410 stainless steels.     

Preparation and evaluation of biocide-loaded particles to control the biofouling zebra mussel, Dreissena polymorpha

The freshwater zebra mussel Dreissena polymorpha is a powerful biofouling bivalve, which has tremendous impact on industrial facilities whose operation depends on the intensive use of freshwater, such as waterworks and power stations. The control of the pest in industrial environments remains a major challenge due to low selectivity over non-target organisms and the expense of the large quantities of biocides required. A novel delivery technique involving the encapsulation of a toxin within hundred micron-sized particles, edible for the bivalves, has been recently proposed. This strategy exploits the mussels’ filtration activity and minimises their avoidance responses to certain chemicals, resulting in an increase of their susceptibility to the biocide. In the present paper, which further develops this approach, a new, promising toxin-loaded particulate formulation is presented. The effectiveness of the product as a molluscicide has been demonstrated in laboratory bioassays. Encapsulation was observed to reduce the amount of biocide required to achieve 90% mortality in a 12-h treatment by a factor of approximately three. The dependence of the biocide-loaded particles’ molluscicidal activity on their physical characteristics is also illustrated in this paper by comparing the features of the promising formulation to those of an unsuccessful particulate product.     

Characterization of Crude Watermelon Seed Oil by Two Different Extractions Methods

The aim of this paper was to study the physical–chemical composition of the watermelon seed oil extracted by a mechanical process using an expeller and by a chemical process using hexane as the solvent. The watermelon seed oil had a high concentration of unsaturated fatty acids. The two primary sterols were stigmasterol and β-sitosterol, which corresponded to approximately 47 and 30% of the total phytosterols. The oil had a low tocopherol content (65.19 mg/kg for S and 73.19 mg/kg for E). Comparing the two extraction methods, extraction by expeller produced an oil of superior quality with respect to oxidative stability, carotenoids and Lovibond color. No significant differences were found between the two extraction methods with respect to the minor components of the oil considered as functional, such as phytosterols.     

The electrical delivery of a sublimable II–VI compound by vapor transport in carbon nanotubes

Progress in the field of femtogram (10⁻¹⁵ g) mass delivery relies on finding dependable transport vehicles and uncomplicated methods to tailor the deposition of active substances. Here, current-conductive containers consisting of turbostratic carbon nanotubes were used to store a light-emitting ternary alloy and guide its delivery on demand. We found that the electrically-activated delivery process of this sublimable compound, performed inside a transmission electron microscope, was highly dependent on factors such as the substrate type and current injection mode. Furthermore, our observations suggest that the alleged “missing matter” problem is not solely due to surface migration. Besides extending the field of electrical delivery to the realm of functional materials, the extrusion and mass transport of a sublimable II–VI compound demonstrates that it is possible to guide vapor migration using a carbon nanotube support.     

Synergistic action between Caryocar coriaceum Wittm. fixed oil with aminoglycosides in vitro

The oil obtained from the Caryocar coriaceum Wittm. (pequi) fruit pulp (C. coriaceum fixed oil – CCFO), rich in fatty acids, has been secularly employed by traditional medicine in the treatment of respiratory affections, skin inflammation, and wounds. These observations encouraged us to investigate the antimicrobial activity of CCFO and to investigate its effect in combination with aminoglycosides. The minimum inhibitory concentration (MIC) of CCFO alone and associated with aminoglycosides against Escherichia coli and Staphylococcus aureus strains were determined using microdilution assay. CCFO alone had a MIC of 512 µg/mL against E. coli and S. aureus resistant strains. Combining the CCFO with aminoglycosides reduced the MIC of aminoglycosides against the resistant strains of E. coli and S. aureus. The results obtained indicate that CCFO displays a significant synergistic antibiotic effect when combined with aminoglycosides, demonstrating that the oil constituents (fatty acids) may act as potentiators of the antibiotic activity of aminoglycosides. These properties make CCFO oil an interesting alternative as a remedy or nutraceutical against multiresistant bacteria, preventing the development of resistance by these microorganisms. Practical applications: This article demonstrates the capacity of the C. coriaceum oil to enhance the antibiotic activity of aminoglycosides. This activity could represent a new way to combat the growing bacterial resistance to antibiotics, an important problem of public health.     

Numerical Investigation of the Effect of Impeller Design Parameters on the Performance of a Multiphase Baffle‐Stirred Reactor

The turbulent gas‐liquid flow field in an industrial 100‐m³ stirred tank was calculated by using computational fluid dynamics based on the finite‐volume method. Turbulent effects were modeled with the shear stress transport model, and gas‐liquid bubbly flow was modeled with the Eulerian‐Eulerian approach using the Grace correlation for the drag force interphase momentum transfer. The relative motion between the rotating impeller and the stationary baffled tank was considered by using a multiple frames of reference algorithm. The effects of Rushton and pitched‐blade impeller design parameters such as blade geometry, location, and pumping direction on the mixing performance were investigated. It was found that a combination of Rushton turbines with up‐pumping pitched‐blade turbines provides the best mixing performance in terms of gas holdup and interfacial area density. The approach outlined in this work is useful for performance optimization of biotechnology reactors, as typically found in fermentation processes.