Colitis cystica profunda

Colitis cystica profunda is a benign disease of the colon. Its importance lies in differentiating it from mucus-producing adenocarcinoma. It has rarely been described in the surgical literature. A review of records of patients seen at the Mayo Clinic produced 66 clinical cases of localized colitis cystica profunda, and in 21 patients the diagnosis was confirmed histologically. Follow-up, which was available in all patients, ranged from 2 months to 29 years, with a mean follow-up of more than 8 years. The data suggest that local excision is the preferred initial therapy.     

Hemodynamic responses to stellate ganglion stimulation in mongrels and greyhounds

A comparison of the effects of left stellate ganglion stimulation (SGS) on central and aortic hemodynamics has been made in chloralose-anesthetized mongrel (M), and greyhound (GH) dogs. Measurements of aortic pressure and flow, and left ventricular pressure were made during stimulation of the decentralized left SG at different frequencies from 0 to 20 Hz. The increases in aortic pressure and flow with SGS were larger in the GH, especially for low frequencies of stimulation. Stroke volume was increased with SGS in the GH at all stimulation rates, whereas in the M it was unchanged. A greater decrease in left ventricular end-diastolic pressure with SGS was found in the GH. These results suggest that differences exist in both the intrinsic and extrinsic control of cardiac output in the greyhound dog compared to the mongrel. These differences may be in part responsible for the elevated arterial blood pressure in the greyhound compared to the mongrel.     

Radar image texture as a function of forest stand age

Data on forest variables are required for environmental and forest management applications. Numerous authors have shown significant correlations between mean radar response intensity and forest variables (age, height or biomass) but few studies have explored the spatial characteristics of the radar response for varying forest states. In this Letter, variation in the most commonly used texture features is shown as a function of an indicator of forest growth (age) for a controlled homogeneous test site (monospecific, even‐aged forest, with identical sylvicultural practices and a sampling that covers all forest stages from sowing to harvest). Significant linear relationships between some texture features and stand age are observed. Moreover, the quality of some fits indicates that texture could be used instead of the usual intensity–age relationships that saturate for mature stands.     

Synthesis and Microstructural Characterization of Substoichiometric Ti2Al(CxNy) Solid Solutions and Related Ti2AlCx and Ti2AlN End‐Members

Ti, TiC, Al and AlN powders were mixed to synthesize Ti₂Al(C_xN_y) (x + y < 1) solid solutions, Ti₂AlC_x (x < 1) and Ti₂AlN‐related end‐members by hot isostatic pressing at 1400°C/80 MPa for 4 h. For the pure carbides, it is demonstrated that single‐phased samples can only be obtained when about 15% of substoichiometry on the carbon site is applied. Such a result likely implies that Ti₂AlC_x can only exist in a narrow range of carbon composition. Ti₂AlN nitride can be synthesized with y = 1. Assuming that vacancy content varies linearly from 0 to 0.15 going from Ti₂AlN to Ti₂AlC_0.85 in the solid solutions, element concentrations have been calculated to synthesize different solid solutions. Thus, it is demonstrated that single‐phased and fully dense Ti₂Al(C_0.23N_0.71), Ti₂Al(C_0.45N_0.45), and Ti₂Al(C_0.66N_0.22) carbonitrides can be synthesized.     

Quantitative Fourier transform infrared analysis for anisidine value and aldehydes in thermally stressed oils

A Fourier transform infrared (FTIR) transmission-based spectroscopic method was investigated for the simultaneous monitoring of aldehyde formation and the determination of anisidine value (AV) in thermally stressed oils. Synthetic calibration standards were prepared by adding known amounts of hexanal,t-2-hexenal andt,t-2,4-decadienal to canola oil (these compounds considered representative of aldehydic compounds formed during oxidation) plus random amounts of other compounds representative of oxidation by-products. The standards were analyzed for their chemical AV. With the partial least squares (PLS) technique, an FTIR spectrometer was calibrated to predict both the concentrations of individual aldehyde types and AV, with the individual aldehyde contributions being related to the chemical AV by multiple linear regression to derive “apparent” AV values. The predictive capability of the PLS calibrations was assessed by analyzing canola oils that were thermally stressed at 120, 155, and 200°C. The apparent AV, predicted for these samples, matched the chemical AV values within ±1.65 AV units. A PLS calibration also was derived by using thermally stressed samples as calibration standards. This approach provided similar predictive accuracy as the use of synthetic calibration standards. As such, quantitative determination of AV by FTIR spectroscopy was shown to be feasible, and the synthetic calibration approach provided additional information on the aldehyde types present in a sample and allowed the use of a simple gravimetric approach for calibrating an FTIR spectrometer. This study provides the basis for the development of a rapid, automated FTIR method for the direct analysis for AV of thermally stressed fats and oils in their neat form without the use of chemical reagents. The implementation of such a method as a quality control tool would eliminate the use and disposal of hazardous solvents and reagents, required by the conventional chemical method, and drastically reduce analysis time (∼2 min/sample). Possible applications include monitoring of the oxidative state of frying oils or evaluation of oxidative stability of biodegradable lubricants.     

High‐Temperature Neutron Diffraction,Raman Spectroscopy,and First‐Principles Calculations of Ti3SnC2 and Ti2SnC

Herein, we report—for the first time—on the additive‐free bulk synthesis of Ti₃SnC₂. A detailed experimental study of the structure of the latter together with a secondary phase, Ti₂SnC, is presented through the use of X‐ray diffraction (XRD), and high‐resolution transmission microscopy (HRTEM). A previous sample of Ti₃SnC₂, made using Fe as an additive and Ti₂SnC as a secondary phase, was studied by high‐temperature neutron diffraction (HTND) and XRD. The room‐temperature crystallographic parameters of the two MAX phases in the two samples are quite similar. Based on Rietveld analysis of the HTND data, the average linear thermal expansion coefficients of Ti₃SnC₂ in the a and c directions were found to be 8.5 (2)·10^?6 K^?1 and 8.9 (1)·10^?6 K^?1, respectively. The respective values for the Ti₂SnC phase are 10.1 (3)·10^?6 K^?1 and 10.8 (6)·10^?6 K^?1. Unlike other MAX phases, the atomic displacement parameters of the Sn atoms in Ti₃SnC₂ are comparable to those of the Ti and C atoms. When the predictions of the atomic displacement parameters obtained from density functional theory are compared to the experimental results, good quantitative agreement is found for the Sn atoms. In the case of the Ti and C atoms, the agreement is more qualitative. We also used first principles to calculate the elastic properties of both Ti₂SnC and Ti₃SnC₂ and their Raman active modes. The latter are compared to experiment and the agreement was found to be good.     

Strain‐induced deformation mechanisms of polylactide plasticized with acrylated poly(ethylene glycol) obtained by reactive extrusion

This work aimed at identifying the tensile deformation mechanisms of an original grade of plasticized polylactide (pPLA) obtained by reactive extrusion. This material had a glass transition temperature of 32.6 °C and consisted of a polylactide (PLA) matrix grafted with poly(acryl‐poly(ethylene glycol)) (poly(Acryl‐PEG)) inclusions. pPLA behaved like a rubber‐toughened amorphous polymer at 20 °C, and its tensile behavior evolved toward a rubbery semicrystalline polymer with increasing temperature. The drawing of pPLA involved orientation of amorphous and crystalline chains, crystallization, and destruction of crystals. It was found that crystal formation and crystal destruction were in competition below 50 °C, resulting in a constant or slightly decreasing crystallinity with strain. Increasing temperature enhanced crystal formation and limited crystal destruction, resulting in an increased crystallinity with the strain level. Drawing yielded a transformation of the initial spherical poly(Acryl‐PEG) inclusions into ellipsoids oriented in the tensile direction. This mechanism may engender the formation of nanovoids within the inclusions due to a decreased density, assumed to be responsible for the whitening of the specimen. © 2015 Society of Chemical Industry     

Biobased poly(butylene 2,5-furandicarboxylate) and poly(butylene adipate-co-butylene 2,5-furandicarboxylate)s: From synthesis using highly purified 2,5-furandicarboxylic acid to thermo-mechanical properties

To synthesize high quality (co)polyesters derived from 2,5-furandicarboxylic acid (FA), an acetic acid refluxing/pH-swing method was proposed to purify FA. 2-Carboxyl furfural and other impurities were removed completely from FA with this method. Using highly purified FA, biobased polyester poly(butylene furnadicarboxylate) (PBF) and aliphatic-aromatic copolyesters poly(butylene adipate-co-butylene 2,5-furandicarboxy-late)s (PBAFs) were synthesized via melt (co)polycondensation. The (co)polyesters were characterized with GPC, FTIR, ¹H NMR, DSC and TGA, and their tensile mechanical properties were also assessed. The copolyesters possess random chain structure, monomer feed ratio-controlled copolymer composition and excellent thermal stability (T_d,5% > 340 °C) in full composition range. Both BA-rich and BF-rich PBAFs are crystalline polymers. The crystallizability decreases with composition, up to nearly amorphous at moderate ?_BF (40–60%). PBAFs with ?_BF no more than 50% exhibit obvious high-elastic deformation and rebound resilience, and possess tensile properties (E 18–160 MPa, σ_b 9–17 MPa, ε_b 370–910%) comparable to poly(butylene adipate). PBAFs with higher ?_BF behave like nonrigid plastics with low tensile moduli (42–110 MPa), moderate strength (30–42 MPa) and high elongation at break (310–470%). In comparison, PBF is a strong and tough thermoplastic having balanced mechanical properties, namely, much higher tensile modulus (1.9 GPa) and strength (56 MPa) and high elongation at break (260%). It seems necessary and effective to use highly purified FA for synthesizing high performance FA-derived (co)polyesters.     

NMR and EPR studies of room temperature highly fluorinated graphite heat-treated under fluorine atmosphere

Semi-ionic carbon fluoride obtained by reaction of graphite with a gaseous mixture of IF₅, HF and F₂ was modified by a post-fluorination at various temperatures in the range 100-680 °C. The resulting materials were studied by ¹⁹F-NMR and EPR both at room temperature and at different experimental temperatures from 200 to 360 K and from 100 to 473 K for NMR and EPR experiments, respectively. ¹⁹F-NMR gives information about the residual intercalated iodine fluoride species (IF₅, IF₆⁻ and IF₇) such as the temperature of their removal from the host fluorocarbon matrix and their mobility into the interlayer space. The nature of the C-F bonding was investigated by ¹⁹F-NMR, MAS/¹³C-NMR, FT-IR spectroscopy and X-ray diffraction. The C-F bonding changes from semi-ionic to a mainly covalent character at a fluorination post-treatment temperature close to 450 °C. This transformation coincides with the removal of the iodine fluoride species from the host structure. The densities of the paramagnetic dangling bonds were studied by EPR; this technique allows also to investigate the local environment of the dangling bonds in the fully fluorinated samples (obtained with fluorination post-treatment temperatures higher than 450 °C). As a matter of fact, an hyperfine structure was observed for these samples; it results from interaction of the dangling bond electron with six neighboring fluorine nuclei. The role of the intercalated species (iodine fluoride compounds and HF) on the mechanisms of the extra-fluorination is also discussed.