液氮温区同轴脉冲管制冷机的实验研究

脉冲管制冷机冷头朝上布置可以使制冷机与超导器件的耦合更方便 ,但对G -M型脉冲管制冷机 ,重力会对这种布置方式产生不利影响。对双向进气型脉冲管制冷机 ,直流和耦合传热会共同影响脉冲管制冷机的性能。介绍了液氮温区G -M型同轴脉冲管制冷机的实验结果 ,主要研究了蓄冷器温度分布和重力对脉冲管制冷机性能的影响     

超声变幅杆解析法设计的可靠性研究

本文提出了用有限元法验证变幅杆解析法设计的可靠性，对三种类型的变幅杆先作解析法设计；然后利用有限元分析软件ANSYS进行模态分析，确定了变幅杆的固有频率，计算了固有频率与工作频率之间的相对误差，以此来评价解析法设计的可靠性；并分析了影响解析法设计可靠性的两个基本因素。     

Preparation and characterization of polyurethane microcapsules containing n‐octadecane with styrene‐maleic anhydride as a surfactant by interfacial polycondensation

A series of polyurethane microcapsules containing a phase change material (PCM) of n‐octadecane was successfully synthesized by an interfacial polymerization in aqueous styrene‐maleic anhydride (SMA) dispersion with diethylene triamine (DETA) as a chain extender reacting with toluene‐2,4‐diisocyanate (TDI). The average diameter of microPCMs is in the range of 5–10 μm under the stirring speed of 3000–4000 rpm. Optical and SEM morphologies of microPCMs had ensured that the shell was regularly fabricated with the influence of SMA. FTIR results confirmed that the shell material was polyurethane and the SMA chains associated on core material reacted with TDI forming a part of shell material. The shell thickness was decreasing in the range of 0.31–0.55 μm with the molar ratio of DETA/TDI from 0.84 to 1.35 and the weight of core material increasing from 40 to 80% (wt %). By controlling the weight ratio of PCM as 40, 50, 60, 70, and 80% in microPCMs, it was found using DSC that the T_m and T_c of microPCMs were in the range of 29.8–31.0^oC and 21.1–22.0°C and an obvious phase change had been achieved nearly the same temperature range of that of PCM. The results from release curves of microPCM samples prepared by 1.4, 1.7, and 2.0 g of SMA indicated the release properties were affected by the amount of the dispersant, which attributed to the emulsion effect and shell polymerization structure. The above results suggest that the shell structure of microPCMs can be controlled and the properties of microPCMs determined by shell will perform proper practical usage. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4996–5006, 2006     

方波扫描路径确定声源声功率误差特性分析

改进了矩形测量面方波扫描路径测量声功率的误差模型 ,以单极子、偶极子及四极子声源为例 ,给出了扫描方向、测量面离声源的距离及扫描线的密度的选取对理论误差的分布图形。分析结果表明 :对选定的测量面 ,在扫描线密度小的情况下 ,通过调整声源离测量面的距离 ,可以在声源近处找到一个最优点或较优点 ,使理论误差为零或很小 ;在绝大多数情况下 ,沿测量面长边扫描误差比沿短边扫描小。     

The Effects of Filtered Channel Quality Feedback on Throughput of Proportional Fair Algorithm

1　IntroductionSchedulingalgorithmsarewidelystudiedforwirelesspacketdatasystems,whichgenerallyhavetwobasiccategories,oneisoptimizedforsystemthroughputandfairness[1～ 2 ] ,andtheotherisforthequalityofservice[3～6] .Forsystemswherepack etdataaretimedivisionmultiplexedacrossusersonthedownlink ,orfromBaseStation (BS)tomultipleMobileStations(MS) ,theBSusesschedulingalgo rithmstodecidewhichuseristransmittedto .ItisindicatedinRefs.[7,8]thatschedulingonlyoneus eratatimeisoptimalfromthepointofviewo…     

Effect of nitrocarburizing on sulphide layer during nitrocarburizing-sulphurating treatment

Compared with the single sulphurating treatment, the duplex treatment of nitrocarburizing-sulphurating can more effectively improve the properties of steel such as friction-reducing, wear resistance and anti-scuffing. Under the same processing parameters, the sulphide layers were fabricated on the surface of CrMoCu alloy cast iron by single ion-sulphurating treatment and nitrocarburizing-sulphurating duplex treatment, respectively. Through the analysis of the sulphide, the effect of the nitrocarburizing on the fabrication of the sulphide layer was investigated. And the result shows that the fabrication of sulphide layer is promoted by the nitrocarburizing treatment.     

大港油田CNG加气站技术特点

天然气作为我国最主要能源之一，其应用领域在不断地扩展。由于天然气受管网敷设的限制。在压缩、储运等方面的技术也引起了众多企业的重视，并成为一些企业发展的战略目标。2004年大港油田依靠地域和气源的优势，建成了天津市首座CNG加气站。经过一年来的生产运行，显现出较好的经济效益和良好的发展前景。从环保性、安全性和经济性等方面阐述了CNG技术特点和发展的优势，对大港油田已建CNG加气站的主要设备、工艺流程、技术特点以及市场发展前景进行了较详尽的阐述。     

一种数字语音通信系统的DSP实现

介绍了一种甚低频低码率数字通信系统的实现方案，该方案中的软件采用混合编程的方法，硬件则用DSP实现，文章给出了整个系统的DSP软硬件调试方法，并通过调试结果表明该方案具有很好的可行性和实时性。     

自治Agents的面向服务的协商模型

提出了一个基于自治Agents的面向服务的协商模型。模型主要包括两大模块：首先定义了一系列的战略和战术过程，使得Agents可以产生初始建议，评价对方的建议，以及在此基础上做出反建议；其次，定义了两个层次的Agent通信机制。二者相辅相成，实现了Agents间合作的动态形成和随机协调，使得Agents可以承担因环境的不确定性而需动态协作的复杂任务。     

铅酸蓄电池的清洁生产

就中国铅酸蓄电池工业的可持续性发展与清洁生产问题进行了初步探讨,并就蓄电池正负极板水洗的清洁生产实例进行了介绍。